Log in

View Full Version : Audio sync problem with The Last Samurai


jeffnguyen23
5th July 2004, 03:05
I did a backup of Last Samurai, DVD to DVD. It ran fine from start to end and output a iso file. The problem was, the audio was a few ticks ahead of the video. I checked the option of "Do not convert audio" but it seemed like the audio was re-encoded because there was delays. Here is the log....


WNASPI32.DLL 4.6.0.1021
--------------------------------------------------------
- 7/4/2004 8:33:29 AM
- DVD to SVCD Conversion
- DVD2DVD ver. 1.2.2 build 1
--------------------------------------------------------
Initializing
- D:\Stripped\VIDEO_TS\VTS_01_0.IFO
- D:\Stripped\VIDEO_TS\VTS_01_1.vob
- D:\Stripped\VIDEO_TS\VTS_01_2.vob
- D:\Stripped\VIDEO_TS\VTS_01_3.vob
- D:\Stripped\VIDEO_TS\VTS_01_4.vob
- D:\Stripped\VIDEO_TS\VTS_01_5.vob
- D:\Stripped\VIDEO_TS\VTS_01_6.vob
- D:\Stripped\VIDEO_TS\VTS_01_7.vob
- D:\Stripped\VIDEO_TS\VTS_01_8.vob
Initializing finished.

--------------------------------------------------------
- 7/4/2004 8:33:31 AM
- Analyzing subtitles
--------------------------------------------------------
Subtitle found: StreamID: 0x25 Language: Español
Subtitle found: StreamID: 0x24 Language: Español
Subtitle found: StreamID: 0x23 Language: Français
Subtitle found: StreamID: 0x22 Language: Français
Subtitle found: StreamID: 0x21 Language: English
Subtitle found: StreamID: 0x20 Language: English
Subtitle found: StreamID: 0x27 Language: Français
Subtitle found: StreamID: 0x26 Language: Français

Executing subtitle selection/verification.
Subtitle selection/verification accepted.
1 subtitle streams selected.
Saving Subtitles ini file
--------------------------------------------------------
- 7/4/2004 8:35:02 AM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -OM=0 -EXIT -OF=[H:\WorkArea\Sorce\DVD2AVI_Project_file] -IF=[D:\Stripped\VIDEO_TS\VTS_01_1.vob,D:\Stripped\VIDEO_TS\VTS_01_2.vob,D:\Stripped\VIDEO_TS\VTS_01_3.vob,D:\Stripped\VIDEO_TS\VTS_01_4.vob,D:\Stripped\VIDEO_TS\VTS_01_5.vob,D:\Stripped\VIDEO_TS\VTS_01_6.vob,D:\Stripped\VIDEO_TS\VTS_01_7.vob,D:\Stripped\VIDEO_TS\VTS_01_8.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 7/4/2004 8:37:32 AM
- Free on drive H: 33684.20 mb
- Extracting the subtitles.
--------------------------------------------------------

Subtitle extraction finished. Extracted these subtitles:
SVCD Stream no: 1 Language: English Num. of subs: 733

Saving Subtitles ini file
--------------------------------------------------------
- 7/4/2004 8:40:49 AM
- Free on drive H: 33676.86 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: H:\WorkArea\Audio\Extracted_audio_1.ac3
Audio1 delay: -464 ms
Audio extraction finished.


Encoding Audio. Filename: H:\WorkArea\Audio\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "H:\WorkArea\Audio\Extracted_audio_1.ac3" -output "H:\WorkArea\Audio\Encoded_audio_1.ac3" -payload -logfile "H:\WorkArea\Audio\Encoded_audio_1.log" ) -ota( -d -464 )
Audio conversion of H:\WorkArea\Audio\Extracted_audio_1.ac3 finished.

Audio conversion finished.

--------------------------------------------------------
- 7/4/2004 8:44:33 AM
- Free on drive H: 32688.90 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 4666096988
AudioSectors: 525382032
VideoPAPO: 64141884
ScanOffsetBytes: 332655
SeqAligningBytes: 21142073
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 3908369
EmptySectors: 238.00
PictureSectors: 0.00
PureMPEGStream: 4051189970.82
Seconds: 9256.67
CalcMPEGStream: 4051189970.82
Frames: 221770
CDSize: 4464.00
Number of CDs: 1
Cut point 4455.00
Variable Settings:
Frames: 221770
Anti Noise Filter: Off
Passes: 3
Image Quality: 17
VAF file creation: On
Video Encoding Mode: One Pass VBR
Q. Factor: 59
Min. bitrate: 2000
Max. bitrate: 3501
Aspect Ratio: Anamorphic (no borders, encoded as 16:9)

---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\AVISYN~1.5PL\Mpeg2dec\MPEG2D~1.DLL")
MPEG2Source("H:\WorkArea\Sorce\DVD2AV~1.D2V")
# -= AviSynth script by FitCD v1.1.2 =-
LanczosResize(720,368,0,59,720,359)
AddBorders(0,56,0,56)
Import("H:\WorkArea\Video\ResampleAudio.avs")
ResampleAudio(44100)
ConvertToYUY2()
----AVS End----

--------------------------------------------------------
- 7/4/2004 12:03:09 PM
- DVD to SVCD Conversion
- DVD2DVD ver. 1.2.2 build 1
--------------------------------------------------------
Initializing
-
Initializing finished.

--------------------------------------------------------
- 7/4/2004 12:03:09 PM
- Free on drive H: 28585.53 mb
- Restarting from: Pulldown
--------------------------------------------------------
- 7/4/2004 12:03:12 PM
- Free on drive H: 28585.53 mb
- Video Pulldown
--------------------------------------------------------
Executing Pulldown. Commandline:
"C:\Program Files\DVD2SVCD\pulldown\pulldown.exe" "H:\WorkArea\Video\Encoded_Video_CCE_NTSC.mpv" "H:\WorkArea\Mux\Pulldown_Encoded_Video_NTSC.mpv" -prog_frames p
Video pulldown finished.

Saving Subtitle Timecodes.
SVCD subtitles.
--------------------------------------------------------
- 7/4/2004 12:10:33 PM
- Free on drive H: 24728.47 mb
- Creating DVD-Image using Sonic Scenarist
--------------------------------------------------------
Creating Sonic Scenarist Script file
Executing Sonic Scenarist
Closing program
Image creation finished.

--------------------------------------------------------
- 7/4/2004 12:36:16 PM
- Free on drive H: 11317.80 mb
- Conversion done!
--------------------------------------------------------

jeffnguyen23
5th July 2004, 04:26
I replaced the encoded audio with the extracted audio and the problem solved.

bobwillis
5th July 2004, 20:42
Hi,

I recommend ripping directly from the source disc with DVD2DVD's internal routines in order to prevent future problems.

Regards,
Bob

jeffnguyen23
7th July 2004, 02:46
I'll do that next time. Thanks!