How to edit virtualvcr's tvtuner channel list?

[toysoldier]

I'm living in CHINA, my capture card with chip philips ssa7130,
and tuner is philips,because virtuldub cann't access this chip,
now I use virtualvcr to capture tv programme,when i scan programme,
just find 12 channels,I fond vvcr itself frequency list not same as
my location tv frequency,the normal channel frequency is the same
as DSCALER'S P.R.C (CHINA) channel list.
I have change my country location from "56" to "86" , no any one
can scan all programme.
I try to find virtualvcr's channel list ,but not find frequency list.
Please help me to find vvcr's frequency list or
how to scan programme accurately ?
thanks.

[minolta]

Have you tried editing VirtualVCR.ini by hand? Here's a snippet of my own:

[ChannelINFO]
0-ID=2
0-MAP=2
0-NAME=
1-ID=3
1-MAP=3
1-NAME=
2-ID=4
2-MAP=4
2-NAME=

This defines my first 3 channels (US channels 2, 3, & 4). If your country code is correct with your tuner, it should work (yes, I've done it before).
-Minolta

[edit]
oops, it seems you're asking something different than I thought. So you enter "Country Code" and "Tuning Space" into Settings->Tuner->TV_Tuner_Device but it is not saved next time you come back?

[toysoldier]

thanks for your help.
this is my tvcard (name is 10moons) itself tvchannel.ini�F

[General]
Total=58
[Channel]
Channel-50=Ch-50,527250,1
Channel-0=Ch-0,49750,1
Channel-51=Ch-51,535250,1
Channel-40=Ch-40,440250,1
Channel-1=Ch-1,57750,1
Channel-52=CCTV-8,543250,1
Channel-41=Ch-41,448250,1
Channel-30=Ch-30,352250,1
Channel-2=Ch-2,65750,1
Channel-53=Ch-53,551250,1
Channel-42=Ch-42,456250,1
Channel-31=Ch-31,360250,1
Channel-20=Ch-20,272250,1
Channel-3=CCTV-4,77250,1
Channel-54=Ch-54,559250,1
Channel-43=Ch-43,471250,1
Channel-32=Ch-32,368250,1
Channel-21=Ch-21,280250,1
Channel-10=Ch-10,192250,1
Channel-4=Ch-4,112250,1
Channel-55=Ch-55,623250,1
Channel-44=Ch-44,479250,1
Channel-33=Ch-33,376375,1
Channel-22=Ch-22,288250,1
Channel-11=Ch-11,200250,1
Channel-5=Ch-5,120250,1
Channel-56=Ch-56,671250,1
Channel-45=Ch-45,487250,1
Channel-34=Ch-34,384250,1
Channel-23=Ch-23,296250,1
Channel-12=Ch-12,208250,1
Channel-6=Ch-6,128250,1
Channel-57=Ch-57,799750,1
Channel-46=Ch-46,495250,1
Channel-35=Ch-35,392250,1
Channel-24=Ch-24,304250,1
Channel-13=Ch-13,216250,1
Channel-7=Ch-7,152250,1
Channel-47=Ch-47,503250,1
Channel-36=Ch-36,400250,1
Channel-25=Ch-25,312250,1
Channel-14=Ch-14,224250,1
Channel-8=Ch-8,168250,1
Channel-48=Ch-48,511250,1
Channel-37=Ch-37,408250,1
Channel-26=Ch-26,320250,1
Channel-15=Ch-15,232250,1
Channel-9=Ch-9,176250,1
Channel-49=Ch-49,519250,1
Channel-38=Ch-38,424250,1
Channel-27=Ch-27,328250,1
Channel-16=Ch-16,240250,1
Channel-39=Ch-39,432250,1
Channel-28=Ch-28,336250,1
Channel-17=Ch-17,248250,1
Channel-29=Ch-29,344250,1
Channel-18=Ch-18,256250,1
Channel-19=Ch-19,264250,1

below is my virtualvcr.ini:
[VirtualVCR]
AudioInputLevel=35
SaveCapStats=0
AlwaysOnTop=0
HideBars=0
AudioInputIndex=0
ResampleAudioTo=10000000
AudioResampleType=0
StreamOffsetType=0
VideoBrightness=143
VideoHue=0
VideoContrast=75
VideoSaturation=70
VideoColour=1
VideoGamma=-1
VideoSharpness=0
TunerChannel=11
TunerCountry=86
TunerInputType=1
TunerMode=16
AudioDelay=0
ShowAudioScope=0
ShowHistogram=0
LogAVdiff=0
UseSmartTee=1
CapStatRelative=1
WantCaptureStats=1
ShowOnStop=1
AVIcompatINDEX=0
UseAudioResample=0
SyncUsingStreamOffset=0
CaptureFile=H:\5.avi
VideoColourFormat=RGB24
WantPreview=1
FrameRate=400000
UseFrameRate=1
CaptureAudio=1
MasterStream=1
UseTimeLimit=0
TimeLimit=0
CustomWidth=720
CustomHeight=576
VideoCompCodec=@device:cm:{33D9A760-90C8-11D0-BD43-00A0C911CE86}\dmb1
AudioCompCodec=end
CompressVideo=1
CompressAudio=0
AudioCapabilityIndex=-1
FreeSpaceLimit=0
UseFreeSpace=0
VideoInputIndex=0
UsePreFilters=0
AppendStampToName=0
Audio_nChannel=2
Audio_nSamplesPerSec=44100
Audio_nAvgBytesPerSec=176400
Audio_nBlockAlign=4
Audio_wBitsPerSample=16
Audio_wFormatTag=1
VideoDevice=0
AudioDevice=0
QuitWhenDone=0
CapStatX=725
CapStatY=2
AppLocX=141
AppLocY=50
[Filters]
FILTER0=end
[ChannelINFO]
0-ID=2
0-MAP=2
0-NAME=
1-ID=3
1-MAP=3
1-NAME=
2-ID=7
2-MAP=7
2-NAME=
3-ID=9
3-MAP=9
3-NAME=
4-ID=11
4-MAP=11
4-NAME=
5-ID=13
5-MAP=13
5-NAME=
6-ID=14
6-MAP=14
6-NAME=
7-ID=17
7-MAP=17
7-NAME=
8-ID=18
8-MAP=18
8-NAME=
9-ID=19
9-MAP=19
9-NAME=
10-ID=20
10-MAP=20
10-NAME=
11-ID=22
11-MAP=22
11-NAME=
12-ID=23
12-MAP=23
12-NAME=none

I fond vvcr "Tuning Space" not same as my location's 8Mhz,and
each channel frequency difference 1\3\5mhz,etc.
I try to edit vvcr's tv scan frequency list ,but not fond ,
maybe it's combine in main programme "virtualvcr.exe" and
cant be changeable.

[minolta]

well, i know that dscalar talks strait to hardware, but vvcr goes through windows WDM drivers. so the problem might not be vvcr but your directx WDM drivers. i imagine that other programs, such as iuVCR, will have the same problem as vvcr. if not, then the problem is vvcr...
-Minolta

[toysoldier]

ok,i will go back home try use iuvcr,thanks!

[toysoldier]

@minolta,very very thanks for your good idea.

Now I first know IUVCR's function is very perfect then vd,vvcr.
I have fond every channel with it ,and capture with it is very easy,
it can capture with FULL SCREEN PREVIEW,
I think this is not be able to do by the others soft.
IUVCR,IS WONDERFUL,EXCELLENT,
although it's a shareware soft,but every function is not limited.