Audio Sync/drops on Toshiba players only?

[Oldeman]

DVD-RB .50
QuEnc .51
One pass encode
dynamic bit rates
Movie Last Samurai NTSC. This has happened on every DVD that I've used QuEnc/DVD-RB combination on.

DvdReMake to drop extras and patch menus, Pinnacle Instant Disk to burn DVD.

On Toshiba players SD-3900, SD-4800 and SD-4900 created DVD has sync problems audio gets progressivly ahead of video and distorts/drops on loud passages. Same DVD plays correctly on PowerDVD, Apex-1500, Philips DVDR75 and Toshiba SD-V290(combo DVD/VCR unit).
If I use ReJig, there are no audio problems.

This is driving me nuts??? Any ideas?

The Oldeman
; Cinema Craft Encoder SP -- Encoder Control List
; Created by DVD ReBuilder

[item]
title=V01000000001001
aud_out=0
vaf_file=D:\DVD_RB_WORK\D2VAVS\V01000000001001.vaf
aud_file=D:\DVD_RB_WORK\D2VAVS\V01000000001001.mpa
file_focused=0
packet_size=2048
width=720
height=480
frame_rate_idx=1
cbr_brate=6000
vbr_brate_avg=786
vbr_brate_min=0
vbr_brate_max=7200
seq_endcode=0
dvd=0
half_width=0
half_height=0
lum_level=0
aspect_ratio=2
gop_m=3
gop_nm=4
gop_hdr=12
seq_hdr=1
all_closed_gop=0
fix_gop_length=0
samples_per_sec=44100
stereo=2
brate_idx=7
crc=1
progressive=1
alternate_scan=0
intra_dc_prec=2
encode_mode=0
vmode=0
fast_mode=0
quality_prec=37
vid_file0=D:\DVD_RB_WORK\D2VAVS\V01000000001001.m2v
vid_file1=D:\DVD_RB_WORK\D2VAVS\V01000000001001.m2v
vid_out=1
vaf_out=1
timecode=0x0000000
opv_q_factor=20
opv_brate_min=0
opv_brate_max=9000
vbr_bias=10
vbr_pass=1
use_filter=0
filter_val=6
non_linear=1
top_first=0
mpeg1=0
mpeg1_cps=1

[file]
name=D:\DVD_RB_WORK\D2VAVS\V01000000001001.avs
frame_first=0
frame_last=1
encode_first=0
encode_last=1

[Oldeman]

I may have posted the excerpt from the RiJig run.

[Noah]

No sync problems here on a Mitsubishi DD-6020 (rebadged Toshiba SD-4700). I'm using CCE, though.