I was doomed by DTS->AAC !!!

[DanielSun]

Please forgive me for asking such a question!
But after searched a lot of threads, i was even more confused by what i was doing !:angry:

I used OagMachine.

Here is what i have done:

azidts with BeSweet.dll v1.5b17+BeSweet v1.5b24....................OK
azidts with BeSweet.dll v1.5b17+BeSweet v1.5b25....................OK
azidts with BeSweet.dll v1.5b23+BeSweet v1.5b24(log:bsn0.2)......Fail
azidts with BeSweet.dll v1.5b23+BeSweet v1.5b25(log:bsn0.21).....Fail
azidts with BeSweet.dll special+BeSweet v1.5b24(log:bsn0.2)......Fail
azidts with BeSweet.dll special+BeSweet v1.5b25(log:bsn0.21).....Fail

all failed log shows:

<<< Error 84: error configuring bsn! >>>

--------------------------------------------------------------
here is one of the failed logs:
--------------------------------------------------------------
azidts v0.1 by zmAn
-------------------
Using BeSweet.dll *SPECIAL* by DSPguru (http://DSPguru.Doom9.org)
Using Shibatch.dll v0.24 by Naoki Shibata & DSPguru (shibatch.sourceforge.net).
Using bsn.dll v0.2 by DPeshev,Richard,DSPguru (http://DSPguru.Doom9.org).
Manual Dynamic-Compression algorithm by LigH (author of WaveBooster).

Logging start : 03/23/04 , 21:45:27.

j:\azidts\azidts.exe -core( -input J:\rip of classic\classic DTS T02 DELAY 16ms.dts -output J:\rip of classic\classic DTS T02 DELAY 16ms.mp4 -logfilea J:\\BeSweet.log ) -azidts( -s surround2 ) -ota( -norm 1 -d 16 ) -boost( /b=2db ) -bsn( -2ch -config ) -profile( The OagMachine v0.11 )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : J:\rip of classic\classic DTS T02 DELAY 16ms.dts
[00:00:00:000] | Output: J:\rip of classic\classic DTS T02 DELAY 16ms.mp4
[00:00:00:000] | Floating-Point Process: No
Error 84: error configuring bsn!
Quiting...
[00:00:00:000] Conversion Completed !

Logging ends : 03/23/04 , 21:45:27.
-------------------------------------------------------------

Could anyone tell me what was wrong with it ?

And BTW: i wanted a surround2 AAC,what should i choose in the iviaudio setup window? 2-speaker mode OR 6-speaker mode ???

Thanks!

Regards
Danielsun

[bobsc]

For BeSweet/BSN/Oagmachine/BeSweet GUI to encode Nero AAC, three dlls from a valid nero installation are needed: 'aac.dll', 'aacenc32.dll' and 'NeroIPP.dll'. These dlls need to be put in the BeSweet folder. From version 60023 onwards aac.dll and aacenc32.dll check for the NeroIPP dll in the registry, therefore a valid Nero Ultra Edition or NeroMix installation is needed.

[DanielSun]

@bobsc
Thanks for your reply,the information you mentioned is ok.
But that seems nothing to do with my problem.My problem is DTS decoding problem. Not a AAC encoding one.
But thank you all the same . I will check out the 3 dlls.

@all

My WinDVD version is WinDVD Platiumn 5.1 DXVA B05.026

[DanielSun]

Well, some update with my problem!
My software:

WinDVD Platiumn 5.1 DXVA B05.026 (iviaudio.ax ver:5.1.5.26)
Nero 6 Ultra Edition 6.3.1.6(aac.dll 2.5.9.5)
(aacenc32.dll 2.6.2.0)
(neroipp.dll 1.0.1.2)

And
Besweet 1.5b24
Besweet 1.5b25
azidts 0.1 with besweet.dll 1.5b17
azidts 0.1 with besweet.dll 1.5b23
azidts 0.1 with besweet.dll special
Oagmachine

I put "aac.dll aacenc32.all neroipp.all" into both besweet folder.

here is what i got:
---------------------------------------------------------------------
azidts with besweet.dll speical +besweet 1.5b25...fail(Error 53: Unable to get bsn.dll interfaces)
azidts with besweet.dll speical +besweet 1.5b25...fail(Error 53: Unable to get bsn.dll interfaces)
azidts with besweet.dll 1.5b23 +besweet 1.5b25...fail(Error 53: Unable to get bsn.dll interfaces)
azidts with besweet.dll 1.5b23 +besweet 1.5b25...fail(Error 53: Unable to get bsn.dll interfaces)
azidts with besweet.dll 1.5b17 +besweet 1.5b25...proceed(after iviaudio config window,did not show aac config window)
azidts with besweet.dll 1.5b17 +besweet 1.5b25...proceed(after iviaudio config window,did not show aac config window)


azidts with besweet.dll speical +besweet 1.5b24...fail(showed aac config window,but azidts crashed)
azidts with besweet.dll speical +besweet 1.5b24...fail(showed aac config window,but azidts crashed)
azidts with besweet.dll 1.5b23 +besweet 1.5b24...fail(Error 53: Unable to get bsn.dll interfaces)
azidts with besweet.dll 1.5b23 +besweet 1.5b24...fail(Error 53: Unable to get bsn.dll interfaces)
azidts with besweet.dll 1.5b17 +besweet 1.5b24...proceed(after iviaudio config window,did not show aac config window)
azidts with besweet.dll 1.5b17 +besweet 1.5b24...proceed(after iviaudio config window,did not show aac config window)


------------------------------------------------------------------

so could someone tell me what is wrong with it ?

[Tuning]

Download bsn v0.22 from plugins page.[http://dspguru.doom9.org]

Use Besweet 1.5b25 + Besweet dll 1.5b23 and bsn 0.22, then see what happens.

Btw, posting your commandline helps us further... :rolleyes:

[DanielSun]

I am sorry to say that ,but tuning,i can not coneect to dspguru.doom9.org!!!:( :( :( 5555

My command line:
----------------------------------------------
azidts with besweet.dll 1.5b23 +besweet 1.5b25
----------------------------------------------
"J:\azidts\azidts.exe" -core( -input "J:\rip of classic\classic DTS T02 DELAY 16ms.dts" -output "J:\rip of classic\classic DTS T02 DELAY 16ms.mp4" -logfilea "J:\\BeSweet.log" ) -azidts( -s surround2 ) -ota( -norm 1 -d 16 ) -boost( /b=2db ) -bsn( -2ch -config ) -profile( The OagMachine v0.11 )
------------------------------------------------------------------
log:
------------------------------------------------------------------
azidts v0.1 by zmAn
-------------------
Using BeSweet.dll v1.5b23 by DSPguru (http://DSPguru.Doom9.org)
Error 53: Unable to get bsn.dll interfaces
Quiting...
[00:00:00:000] Conversion Completed !

Logging ends : 03/24/04 , 10:33:14.
--------------------------------------------------------------------

[DanielSun]

Originally posted by Tuning
Download bsn v0.22 from plugins page.[http://dspguru.doom9.org]

Use Besweet 1.5b25 + Besweet dll 1.5b23 and bsn 0.22, then see what happens.

Btw, posting your commandline helps us further... :rolleyes:


Here it goes:

azidts+besweet.dll 1.5b23+besweet1.5b25+bsn.dll0.22.....azidts crashed after ivisetup window
azidts+besweet.dll 1.5b23+besweet1.5b26+bsn.dll0.22.....azidts crashed after ivisetup window

-----------------------------------------------------------
log of "azidts+besweet.dll 1.5b23+besweet1.5b25+bsn.dll0.22"
------------------------------------------------------------
azidts v0.1 by zmAn
-------------------
Using BeSweet.dll v1.5b23 by DSPguru (http://DSPguru.Doom9.org)
Using bsn.dll v0.22 by DPeshev,Richard,DSPguru (http://DSPguru.Doom9.org).
Manual Dynamic-Compression algorithm by LigH (author of WaveBooster).

Logging start : 03/24/04 , 10:42:40.

j:\azidts\azidts.exe -core( -input J:\rip of classic\classic DTS T02 DELAY 16ms.dts -output J:\rip of classic\classic DTS T02 DELAY 16ms.mp4 -logfilea J:\\BeSweet.log ) -azidts( -s surround2 ) -ota( -norm 1 -d 16 ) -boost( /b=2db ) -bsn( -2ch -config ) -profile( The OagMachine v0.11 )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : J:\rip of classic\classic DTS T02 DELAY 16ms.dts
[00:00:00:000] | Output: J:\rip of classic\classic DTS T02 DELAY 16ms.mp4
[00:00:00:000] | Floating-Point Process: No
--------------------------------------------------------------------

[BoNz1]

If I were you I would just use dtsdec which can be obtained from rarewares.org. Decode it to wav and then use nencode to encode the wav to aac. Seems a lot easier to me not to mention faster than fussing around with windvd's decoder.

[DanielSun]

Originally posted by BoNz1
If I were you I would just use dtsdec which can be obtained from rarewares.org. Decode it to wav and then use nencode to encode the wav to aac. Seems a lot easier to me not to mention faster than fussing around with windvd's decoder.

Dtsdec??
First heard of it!
I found OagMachine in the DTS and AAc FAQs.And dtsdec was not mentioned there!
Thank you !I will try that later!

Since i have spent a lot time in OagMachine,i stiil want to work it out !

[DanielSun]

@BoNz1
About Dtsdec:
Could explain to me what the difference among "wav" "wav6" "wavall" mode ?

[KpeX]

Originally posted by DanielSun
Dtsdec??
First heard of it!
I found OagMachine in the DTS and AAc FAQs.And dtsdec was not mentioned there!
Thank you !I will try that later!

Since i have spent a lot time in OagMachine,i stiil want to work it out ! It has not yet been updated because dtsdec is based on the videolan library (afaik) which is still in a fairly early development stage.

[bobsc]

Originally posted by DanielSun
Since i have spent a lot time in OagMachine,i stiil want to work it out !
Do you have dtsac3source.ax installed?

[bobsc]

Originally posted by DanielSun
About Dtsdec:
Could explain to me what the difference among "wav" "wav6" "wavall" mode ?
"wav" is stereo wav output and "wavall" is multichannel wav output.

[daphy]

azidts+besweet.dll 1.5b23+besweet1.5b26+bsn.dll0.22.....azidts crashed after ivisetup window

besweet1.5b26???

I guess I missed something, did I?

CYA Daphy :confused:

[DanielSun]

Originally posted by daphy
besweet1.5b26???

I guess I missed something, did I?

CYA Daphy :confused:

besweet 1.5b26 was packed with bsn.dll 0.22

[DanielSun]

[QUOTE]Originally posted by bobsc
Do you have dtsac3source.ax installed?

i think so,but what is that for ?

[bobsc]

Originally posted by DanielSun
i think so,but what is that for ?
It is needed for azidts. dtsac3source.ax is a updated version of DTSSource.ax. Read the ReadMe of azidts.

[DanielSun]

Originally posted by bobsc
It is needed for azidts. dtsac3source.ax is a updated version of DTSSource.ax. Read the ReadMe of azidts.

I got it!Thank you!

[DanielSun]

I searched forum and found there are several channel mapping issues.

I was confuse because the issue are related to so many files,such as azidts,besweet,bsn....

Could any1 explain that for me?
And i got bsn0.22 and besweet1.5b26

What is the difference between bsn 0.2 0.21 and 0.22.
Which bsn.dll should i use in different situations?

[DanielSun]

Originally posted by bobsc
"wav" is stereo wav output and "wavall" is multichannel wav output.

Can this multichannel wav be used in OagMachine or AacMachine?

What about wav6??

[BoNz1]

Originally posted by DanielSun
@BoNz1
About Dtsdec:
Could explain to me what the difference among "wav" "wav6" "wavall" mode ?

Well probably the wav6 will output 6 mono wavs I am guessing. However, I have never tried it. I have only used the wav and wavall which were explained earlier.
EDIT: Actually I just tested it and that appears to not be what it is doing, seems to be just a six channel wav.

[P0l1m0rph1c]

"wav" just decodes the DTS files and downmixes to stereo.

"wav6" always forces the creation of a 5.1 wav file, no matter what.

"wavall" decodes the DTS to a wav file with the same number of channels as the original DTS.

That said, in 99% of the cases, "wav6" and "wavall" should make the same thing.

[DanielSun]

@BoNz1,P0l1m0rph1c

Thank you for your replys!

Regards
Danielsun.