BeSweet doesnt open file err sumthin

[hyway]

okies hwg been long time since i posted- thought i checked the search good enuff to post this -but then again maybe not-anyways.
Fresh format-[formated b4 an neva had this problem]
Heres wuts goin on- i captured a tv show- used vDub to make wave- then redid avi with the wave from vDub [cause dvd2svcd doesnt like my audio-an this also has worked b4]
loaded the avi in dvd2svcd--err-avi2svcd- an it extracts audio- but beSweet crashs now when goin to make the encoded audio.
So i have the gui for BeSweet an go fig- it will trancode the extracted file fine to mp2.
here are the log files,

DVD2SVCD log
Encoding Audio. Filename: D:\encode\sur8-3\Extracted_audio_1.wav
Executing BeSweet. Commandline:
"C:\dvd\svcd\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "D:\encode\sur8-3\Extracted_audio_1.wav" -output "D:\encode\sur8-3\Encoded_audio_1.mp2" -logfile "D:\encode\sur8-3\Encoded_audio_1.log" ) -ota( -g max ) -shibatch( --rate 48000 ) -2lame( -e -b 192 -m s )
Audio conversion of D:\encode\sur8-3\Extracted_audio_1.wav finished.

Audio conversion finished. <<<<<hahahahahah NOT !!
Encode audio log
Logging start : 02/22/04 , 15:54:26.

C:\dvd\svcd\DVD2SVCD\BeSweet\BeSweet.exe -core( -input D:\encode\sur8-3\Extracted_audio_1.wav -output D:\encode\sur8-3\Encoded_audio_1.mp2 -logfile D:\encode\sur8-3\Encoded_audio_1.log ) -ota( -g max ) -shibatch( --rate 48000 ) -2lame( -e -b 192 -m s )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : D:\encode\sur8-3\Extracted_audio_1.wav
[00:00:00:000] | Output: D:\encode\sur8-3\Encoded_audio_1.mp2
[00:00:00:000] | Floating-Point Process: Yes <<<<<<<<<<<CRASH
BeSweet Gui log
BeSweet v1.4 by DSPguru.
--------------------------
Using lame_enc.dll v1.28 (4/6/2002), Engine 3.92 <http://www.mp3dev.org/>.

Logging start : 02/22/04 , 16:01:31.

C:\dvd\svcd\DVD2SVCD\BeSweet\BeSweet.exe -core( -input d:\encode\sur8-3\Extracted_audio_1.wav -output d:\encode\sur8-3\Extracted_audio_1-New.wav -logfilea C:\dvd\svcd\DVD2SVCD\BeSweet\BeSweet.log ) -ota( -hybridgain ) -profile( ~~~~~ Default Profile ~~~~~ )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : d:\encode\sur8-3\Extracted_audio_1.wav
[00:00:00:000] | Output: d:\encode\sur8-3\Extracted_audio_1-New.wav
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:000] | Source Sample-Rate: 48.0KHz
[00:00:00:000] +-------- LAME -------
[00:00:00:000] | Bitrate method : CBR
[00:00:00:000] | MP3 bitrate : 128
[00:00:00:000] | Channels Mode : Joint Stereo
[00:00:00:000] | Error Protection: No
[00:00:00:000] +---------------------
[00:39:50:648] Conversion Completed !
[00:39:50:648] Actual Avg. Bitrate : 128kbps
[00:04:23:000] <-- Transcoding Duration
Logging ends : 02/22/04 , 16:05:54. <<<<<<<<< WORKS !!!!!!

I just want my Avi2svcd to work again
:( , any help and i would be greatly thankfull.
And you know what? I'm sure it's sumthin real simple. Go Fig.

[jsoto]

Not clear to me what is happening, but please check the following points:
- Sampling frec of your input. Is it 48k?
- Seems in your BeSweet GUI conversion, you are converting from wav to wav, not to mp2. In any case try to get the same command line, including resampling to 48k.
jsoto

[hyway]

AHHHHH Never noticed that in the GUI it said -Wave- all i did was check the default profile for- svcd sound -sampling is 48K- when i get home form work tonite i will import the default profile from my other comp to see if it changes the command line to .mp2
Good eye : )
We'll go from there thanks for the reply.

[hyway]

Okies Hwg - tried resetting Gui in BeSweet to mp2 an hers what i got,

Logging start : 02/23/04 , 23:42:44.

C:\dvd\svcd\DVD2SVCD\BeSweet\BeSweet.exe -core( -input d:\Capture\audio.wav -output d:\Capture\audio-New.mp2 -logfilea C:\dvd\svcd\DVD2SVCD\BeSweet\BeSweet.log ) -ota( -hybridgain ) -2lame( -m s -b 192 -e ) -profile( ~~~~~ Default Profile ~~~~~ )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : d:\Capture\audio.wav
[00:00:00:000] | Output: d:\Capture\audio-New.mp2
[00:00:00:000] | Floating-Point Process: Yes
Error 47: Error with LAME dll!
Quiting...
[00:00:00:000] Conversion Completed !
Logging ends : 02/23/04 , 23:42:44.


now also i checked the file with AVIcodec an get this
Unknown[0xc0]---audio
like i said b4 I have formated b4 an never had this problem till now- maybe an another format but this time do a fdisk- i dunno -i'll give it a few more shots but running out of ideas,

Thanks Again For Any Help

[hyway]

New developement
Using Ogg Vorbis v1.0 dlls (http://www.vorbis.com).

Logging start : 02/24/04 , 19:29:57.

C:\dvd\svcd\DVD2SVCD\BeSweet\BeSweet.exe -core( -input d:\Capture\audio.wav -output d:\Capture\audio-New.ogg -logfilea C:\dvd\svcd\DVD2SVCD\BeSweet\BeSweet.log ) -ota( -hybridgain ) -ogg( -q 0.200 )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : d:\Capture\audio.wav
[00:00:00:000] | Output: d:\Capture\audio-New.ogg
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:000] | Source Sample-Rate: 48.0KHz
[00:00:00:000] +-------- OGG --------
[00:00:00:000] | VBR Quality : 0.200
[00:00:00:000] +---------------------
[00:39:50:650] Conversion Completed !
[00:39:50:650] Actual Avg. Bitrate : 82kbps
[00:05:42:000] <-- Transcoding Duration
Logging ends : 02/24/04 , 19:35:39.
Go Fig

[hyway]

Well usin ogg file didnt work BUT !!!!!!!!!!!
i used CoolEdit to check file an it said it was a 48001 file so i redid to a 4800 an then remixed in v-dub wit video an now encodin in avi2svcd an heres the file file log

BeSweet v1.4 by DSPguru.
--------------------------
Using Shibatch.dll v0.2 by Naoki Shibata & DSPguru (shibatch.sourceforge.net).
Using MP2enc.dll v1.129 (23/5/2002), Engine 1.129 <http://www.cdex.n3.net>.

Logging start : 02/24/04 , 21:21:27.

C:\dvd\svcd\DVD2SVCD\BeSweet\BeSweet.exe -core( -input D:\encode\sur retry\Extracted_audio_1.wav -output D:\encode\SURRET~1\Encoded_audio_1.mp2 -logfile D:\encode\SURRET~1\Encoded_audio_1.log ) -ota( -g max ) -shibatch( --rate 48000 ) -2lame( -e -b 192 -m s )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : D:\encode\sur retry\Extracted_audio_1.wav
[00:00:00:000] | Output: D:\encode\SURRET~1\Encoded_audio_1.mp2
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:000] | Overall Track Gain: 2.164dB
[00:00:00:000] | Source Sample-Rate: 48.0KHz
[00:00:00:000] +------- MP2ENC ------
[00:00:00:000] | Bitrate method : CBR
[00:00:00:000] | MP2 bitrate : 192
[00:00:00:000] | Channels Mode : Stereo
[00:00:00:000] | Error Protection: Yes
[00:00:00:000] +---------------------
[00:39:50:588] Conversion Completed !


wtf go fig now the ? is why is the audio being saved as a 48001 file an not 4800?

Next? oh btw the encode worked this time --heres log

Encoding Audio. Filename: D:\encode\sur retry\Extracted_audio_1.wav
Executing BeSweet. Commandline:
"C:\dvd\svcd\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "D:\encode\sur retry\Extracted_audio_1.wav" -output "D:\encode\SURRET~1\Encoded_audio_1.mp2" -logfile "D:\encode\SURRET~1\Encoded_audio_1.log" ) -ota( -g max ) -shibatch( --rate 48000 ) -2lame( -e -b 192 -m s )
Audio conversion of D:\encode\sur retry\Extracted_audio_1.wav finished.

Audio conversion finished.

--------------------------------------------------------
- 2/24/2004 9:23:43 PM
- Free on drive D: 60502.57 mb
- Converting Pictures

now any ideas on a fix other then that?
whooooooop!!

[hyway]

Oh BTW- I Formated AGAIN- things seem ok, GFG Fresh Install.

Peace