Missing one channel audio

[mailbox75]

Everything went well with my conversion to SVCD on previous builds. Now I am using 1.2.1 B3 to back up my DVD. One of the audio channel is missing after complete muxtiplexing. I was only beable to hear audio on channel 2 (Ox81). The other channel seem doesn't exit went I play back with InterVideo v4.0. Can someone help me please.




WNASPI32.DLL 4.7.0.0
--------------------------------------------------------
- 12/6/2003 12:26:47 AM
- DVD to SVCD Conversion
- DVD2DVD ver. 1.2.1 build 3
--------------------------------------------------------
Initializing
WARNING! You seem to be using "Norton Unerase Protection" and
you want to delete the temporary files created by dvd2svcd.
This can cause DVD2SVCD problems. Even though DVD2SVCD deletes
the temporary files, Norton doesn't, therefore DVD2SVCD
might run into diskspace problems. I suggest that you stop the
"Norton Unerase Protection" Service.
- D:\VIDEO_TS\VTS_01_0.IFO
- D:\VIDEO_TS\VTS_01_1.vob
- D:\VIDEO_TS\VTS_01_2.vob
- D:\VIDEO_TS\VTS_01_3.vob
- D:\VIDEO_TS\VTS_01_4.vob
- D:\VIDEO_TS\VTS_01_5.vob
Initializing finished.

--------------------------------------------------------
- 12/6/2003 12:26:52 AM
- Free on drive C: 29119.92 mb
- Internal rip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- D:\VIDEO_TS\VTS_01_1.vob
- D:\VIDEO_TS\VTS_01_2.vob
- D:\VIDEO_TS\VTS_01_3.vob
- D:\VIDEO_TS\VTS_01_4.vob
- D:\VIDEO_TS\VTS_01_5.vob

Ripping: D:\VIDEO_TS\VTS_01_1.vob
Analyzing DVD2AVI Project file
Force Film NOT activated!
Framerate: 29970
Ripping finished. Speed: 3366

--------------------------------------------------------
- 12/6/2003 12:27:40 AM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\VideoEdit\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\VideoEdit\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[C:\VideoEdit\Final1\DVD2AVI_Project_file] -IF=[C:\VideoEdit\RipCD2\VTS_01_1.vob]
Analyzing DVD2AVI Project file
Force Film NOT activated!
Framerate: 29970
DVD2AVI processing done.

--------------------------------------------------------
- 12/6/2003 12:28:00 AM
- Free on drive C: 28965.41 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: C:\VideoEdit\Final1\Extracted_audio_1.ac3
Found AC3 stream id: 0x81
Filename: C:\VideoEdit\Final1\Extracted_audio_2.ac3
Audio1 delay: -67 ms
Audio2 delay: -67 ms
Analyzing DVD2AVI Project file
Force Film NOT activated!
Framerate: 29970
Audio extraction finished.

--------------------------------------------------------
- 12/6/2003 12:28:13 AM
- Free on drive C: 28965.41 mb
- AUDIO conversion
--------------------------------------------------------

Encoding Audio. Filename: C:\VideoEdit\Final1\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\VideoEdit\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\VideoEdit\Final1\Extracted_audio_1.ac3" -output "C:\VIDEOE~1\Final1\Encoded_audio_1.mp2" -logfile "C:\VIDEOE~1\Final1\Encoded_audio_1.log" ) -azid( -L -3db -l 0db -c normal -s surround -g max ) -ota( -d -67 ) -2lame( -e -b 192 -m s )
Audio conversion of C:\VideoEdit\Final1\Extracted_audio_1.ac3 finished.


Encoding Audio. Filename: C:\VideoEdit\Final1\Extracted_audio_2.ac3
Executing BeSweet. Commandline:
"C:\VideoEdit\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\VideoEdit\Final1\Extracted_audio_2.ac3" -output "C:\VIDEOE~1\Final1\Encoded_audio_2.mp2" -logfile "C:\VIDEOE~1\Final1\Encoded_audio_2.log" ) -azid( -L -3db -l 0db -c normal -s surround -g max ) -ota( -d -67 ) -2lame( -e -b 224 -m s )
Audio conversion of C:\VideoEdit\Final1\Extracted_audio_2.ac3 finished.

Audio conversion finished.

--------------------------------------------------------
- 12/6/2003 12:30:07 AM
- Free on drive C: 28965.39 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 4682829788
AudioSectors: 12338116
VideoPAPO: 72348408
ScanOffsetBytes: 10208
SeqAligningBytes: 648743
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 0.00
PureMPEGStream: 4597484309.17
Seconds: 234.06
CalcMPEGStream: 4597484309.17
Frames: 6805
CDSize: 4480.00
Number of CDs: 1
Cut point 4476.00
Variable Settings:
Frames: 6805
Anti Noise Filter: Off
Passes: 2
Image Quality: 17
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 2000
Max. bitrate: 9000
Avg. Bitrate: 7200
Aspect Ratio: 4:3 (No borders, encoded as 4:3)

---AVS Begin---
LoadPlugin("C:\VIDEOE~1\DVD2SVCD\AVISYN~1.5PL\Mpeg2dec\MPEG2D~1.DLL")
mpeg2source("C:\VIDEOE~1\Final1\DVD2AV~1.D2V")
BicubicResize(720,480,0.0,0.6)
Import("C:\VideoEdit\Final1\ResampleAudio.avs")
ResampleAudio(44100)
ConvertToYUY2()
----AVS End----

Closing program
CCE Max Speed: 0.780
Video Encoding finished.

--------------------------------------------------------
- 12/6/2003 12:44:59 AM
- Free on drive C: 29173.48 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\VideoEdit\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 12/6/2003 12:45:02 AM
- Free on drive C: 29173.48 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\VideoEdit\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 12/6/2003 12:45:05 AM
- Free on drive C: 29173.48 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\VideoEdit\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 12/6/2003 12:45:08 AM
- Free on drive C: 29173.48 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\VideoEdit\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Cut point: 4476 mb

Executing RunbbMPEG. Commandline:
"C:\VideoEdit\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\VideoEdit\Final1\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

Image creation finished.

--------------------------------------------------------
- 12/6/2003 12:47:20 AM
- Free on drive C: 28964.50 mb
- Conversion done!
--------------------------------------------------------

Win XP Dual P3 800 512MB

[smiller667]

Try listening to the audio files generated by dvd2svcd during conversion. Are they OK? According to your log, no diskspace was used for extraction and conversion of both tracks - which looks suspicious.

Then again, this might be due to the fact that Norton Unerase is active and running, so the figures reported might not reflect the actual situation.

[mailbox75]

I listen to both encoded audio, they sound great. Also my Norton Protect is not active. I've used the previous builds with out problems. It seem that the problem occur at the Muxtiplexing process.
I wonder if anyone encounter the same problem.

BeSweet v1.5b19 by DSPguru.
--------------------------
Using azid.dll v1.8 (b825) by Midas (midas@egon.gyaloglo.hu).
Using MP2enc.dll v1.129 (23/5/2002), Engine 1.129 <http://www.cdex.n3.net>.

Logging start : 12/06/03 , 00:28:17.

C:\VideoEdit\DVD2SVCD\BeSweet\BeSweet.exe -core( -input C:\VideoEdit\Final1\Extracted_audio_1.ac3 -output C:\VIDEOE~1\Final1\Encoded_audio_1.mp2 -logfile C:\VIDEOE~1\Final1\Encoded_audio_1.log ) -azid( -L -3db -l 0db -c normal -s surround -g max ) -ota( -d -67 ) -2lame( -e -b 192 -m s )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : C:\VideoEdit\Final1\Extracted_audio_1.ac3
[00:00:00:000] | Output: C:\VIDEOE~1\Final1\Encoded_audio_1.mp2
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:-67] +-------- AZID -------
[00:00:00:-67] | Input Channels Mode: 2/0, Bitrate: 384kbps
[00:00:00:-67] | Output Stereo mode: Dolby surround compatible
[00:00:00:-67] | Total Gain: 7.208dB, Compression: Normal
[00:00:00:-67] | LFE levels: To LR -3.0dB, To LFE 0.0dB
[00:00:00:-67] | Center mix level: BSI
[00:00:00:-67] | Surround mix level: BSI
[00:00:00:-67] | Dialog normalization: No
[00:00:00:-67] | Rear channels filtering: No
[00:00:00:-67] | Source Sample-Rate: 48.0KHz
[00:00:00:-67] +------- MP2ENC ------
[00:00:00:-67] | Bitrate method : CBR
[00:00:00:-67] | MP2 bitrate : 192
[00:00:00:-67] | Channels Mode : Stereo
[00:00:00:-67] | Error Protection: Yes
[00:00:00:-67] +---------------------
[00:03:47:133] Conversion Completed !
[00:03:47:133] Actual Avg. Bitrate : 192kbps
[00:00:49:000] <-- Transcoding Duration

Logging ends : 12/06/03 , 00:29:06.
*******************************************************
BeSweet v1.5b19 by DSPguru.
--------------------------
Using azid.dll v1.8 (b825) by Midas (midas@egon.gyaloglo.hu).
Using MP2enc.dll v1.129 (23/5/2002), Engine 1.129 <http://www.cdex.n3.net>.

Logging start : 12/06/03 , 00:29:10.

C:\VideoEdit\DVD2SVCD\BeSweet\BeSweet.exe -core( -input C:\VideoEdit\Final1\Extracted_audio_2.ac3 -output C:\VIDEOE~1\Final1\Encoded_audio_2.mp2 -logfile C:\VIDEOE~1\Final1\Encoded_audio_2.log ) -azid( -L -3db -l 0db -c normal -s surround -g max ) -ota( -d -67 ) -2lame( -e -b 224 -m s )

[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : C:\VideoEdit\Final1\Extracted_audio_2.ac3
[00:00:00:000] | Output: C:\VIDEOE~1\Final1\Encoded_audio_2.mp2
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:-67] +-------- AZID -------
[00:00:00:-67] | Input Channels Mode: 2/0, Bitrate: 384kbps
[00:00:00:-67] | Output Stereo mode: Dolby surround compatible
[00:00:00:-67] | Total Gain: 9.392dB, Compression: Normal
[00:00:00:-67] | LFE levels: To LR -3.0dB, To LFE 0.0dB
[00:00:00:-67] | Center mix level: BSI
[00:00:00:-67] | Surround mix level: BSI
[00:00:00:-67] | Dialog normalization: No
[00:00:00:-67] | Rear channels filtering: No
[00:00:00:-67] | Source Sample-Rate: 48.0KHz
[00:00:00:-67] +------- MP2ENC ------
[00:00:00:-67] | Bitrate method : CBR
[00:00:00:-67] | MP2 bitrate : 224
[00:00:00:-67] | Channels Mode : Stereo
[00:00:00:-67] | Error Protection: Yes
[00:00:00:-67] +---------------------
[00:03:47:133] Conversion Completed !
[00:03:47:133] Actual Avg. Bitrate : 224kbps
[00:00:50:000] <-- Transcoding Duration

Logging ends : 12/06/03 , 00:30:00.

[Richard.J]

As a newbie I was about to post a question that goes into the same direction.
I have ripped a DVD and created a SVCD with 2 audio channels. Unfortunately, both channels are called "audio0" and thus I can only select the language using an elecard (software) player. A PowerDVD player does not allow to select a language (because of the name of the audio channels, I assume).
So, maybe this is the answer to your question here? Problem is, how to solve this?

Richard