Scenarist Output Problem

[EZBKOVNStudio]

I've followed the Big3 method listed on 3 sites(doom9, trilight, dvddigest) and I still can't figure this out... everything's cool until I output it in scenarist. Please help. BTW I'm trying to practice on my Scryed DVD1(anime).

I'm using these versions of software:
DVD Decrypter: 3.1.6.0
DoItFast4U: 1.3.0.0
AVISynth: 2.5.2.0
DoCCE4U: 1.0.1.5 beta
CCE: 2.66.01.07
Scenarist Pro: 2.6.0.0218

Here's my whole log of my "Build":
Info
Info Creating DVD Files
Error Scene duration shall be more than 0.4 second.
Error Scene duration shall be more than 0.4 second.
Info No VTS<VTS_01> Language Tracks found
Info Creating DVD data (VTS Title) VTS#01
Info Preparing to multiplex track VTS_01_PGC_01
Info Creating Multiplexer info
Info Encoding subpicture H:\SCRYED_V1\SUBS\VTS_01_VSUB_P1A1-00-F\VTS_01_VSUB_P1A1-00-F-English_0001.bmp
Info Multiplexing
Info Multiplexing VOB Main Stream
Error The number(0.0) of frame in a VOBU is less than 11.99 (around 00:00:08:22).
Warning Exiting is canceled because "ExitVobuSizeError" is 0 in the file Scenarist.ini.
Error Can not read a GOP at 00:00:09:04 (try to read = 12380 B; read done = 11616 B).
Error Please check the video stream (H:\SCRYED_V1\VTS__01_P01.4~3_1.NOPULL.MPV) or the .vif file or re-generate them.
Error dvd_mux : DoMux Multiplexing Error
Error Terminated Multiplexing (scryed1.scn-VTS_01_PGC_01_t.vob).
Error Can't read the input stream.
Error Multiplex is failed.
Info Multiplexing failed, Track<VTS_01_PGC_01>

Error MuxFromDB:MuxVTS failed
Error Multiplex failed
Error DVD files could not be created

[D3s7]

you can try deleting the VIF and opening scenarist again but more then likely you should re-encode that one file....

[EZBKOVNStudio]

I've tried re-encoding the one file. Do you think it's because I haven't loaded the "new settings" file into DoCEE4U instead of leaving the default? I'll try and delete the VIF and try again and give you a heads up.

I'm new to the DVDr stuff, but SVCDs are more of my forte.

[EZBKOVNStudio]

Okay, I tried deleting the VIF and that didn't work. I then tried to re-encode with the "newdocce" settings file instead of the default one you get from ReAuthorist. Then I tried to open my scenarist project again and output, now I got a slightly different error:

Info
Info Creating DVD Files
Error Scene duration shall be more than 0.4 second.
Error Scene duration shall be more than 0.4 second.
Error Scene duration shall be more than 0.4 second.
Info No VTS<VTS_01> Language Tracks found
Info Creating DVD data (VTS Title) VTS#01
Info Preparing to multiplex track VTS_01_PGC_01
Info Creating Multiplexer info
Info Multiplexing
Info Multiplexing VOB Main Stream
Error The number(0.0) of frame in a VOBU is less than 11.99 (around 00:00:08:23).
Warning Exiting is canceled because "ExitVobuSizeError" is 0 in the file Scenarist.ini.
Error Can not read a GOP at 00:00:09:19 (try to read = 10584 B; read done = 1924 B).
Error Please check the video stream (H:\SCRYED_V1\VTS__01_P01.4~3_1.NOPULL.MPV) or the .vif file or re-generate them.
Error dvd_mux : DoMux Multiplexing Error
Error Terminated Multiplexing (scryed1.scn-VTS_01_PGC_01_t.vob).
Error Can't read the input stream.
Error Multiplex is failed.
Info Multiplexing failed, Track<VTS_01_PGC_01>

Error MuxFromDB:MuxVTS failed
Error Multiplex failed
Error DVD files could not be created

As you can see, there are now 1 more "Scene duration" error has shown up, the "around blah numbers" error has changed, and the numbers for the GOP read error have changed for the "read done". I will now try to go back into ReAuthorist and make a new scenarist file and import the files in scenarist again.

The importing has a few errors, I'm not sure if they're supposed to be overlooked, but I didn't wanna flood the forum so the log would be found here, http://www.ezbkovnstudio.com/scryed1-input_error_log.txt

Now, I try to output it, and has errors, but goes past the first VTS1_1 file. No errors on the VTS2-5 and then messes up on the VTS6. There are 19 VTS on this DVD, 1 PGC each. You can find the output error log: http://www.ezbkovnstudio.com/scryed1-output_error_log.txt

I really don't get it and it seems like a different problem than I've read about at the forums here.

[lrosado]

I've gotten the same error, dont know what causes that.

[EZBKOVNStudio]

which is why i posted. i'm sure there are more people that have had these problems, and the higher ups can help us all... so in the event that we do figure it out, we can spread the word! :D

[D3s7]

Did you use RA to generate the script or you authoring from scratch?

if your doing it from scratch, did you remember to all assets to DropFrame (if pulleddown)?

"Error Scene duration shall be more than 0.4 second." I'm guessing those are small (nocce) files - how did you import them?

need a little more info on how this was setup

[lrosado]

script was generated by RA. All assets are drop frame, i checked. any ideas?

[D3s7]

Not off the top of my head... usually whenver I've had that error it's due to a corrupt asset..

Try importing JUST that file into a new Scenarist project and see if it likes it that way... could be something goofy w/ the RA script but not sure what..

make sure to delete the VAF (from CCE) and the VIF (from Scenarist) files before you re-encode...

also, try playing the MPV file in a mpeg2 player like powerdvd and see if it plays ok...

You didn't get any import errors or general errors when creating the project in scenarist but only on build?

[lrosado]

exactly, no errors on importing just build as EZBKOVNStudio is going through the same thing. I tried playing all MPV's and all play fine in powerdvd. Will try to import them separately in Scenarist to see if I get the same error.

[EZBKOVNStudio]

http://www.ezbkovnstudio.com/scryed1-input_error_log.txt

That's the scenarist input log. The MPEG2 file works in WMP6 and PowerDVD.

Should I re-encode with DoCCE4U 1.0.5 or BatchCCEWS?

http://www.ezbkovnstudio.com/scryed1-output_error_log.txt

That's the output error log.

As you can see, the input I got a few errors as well. Dunno why.

[Eyes`Only]

reencode with LESS passes than you did before. One of your passes is causing CRC errors, I've seen this symptom before. Basically to test the theory, do a one pass VBR (delete the .vaf first) and see if your Scenarist problem goes away. That will at least let you know if it works. Then if that works, increase passes by 1 and reencode (keeping the .vaf) until you get the CRC errors, and you'll find out which pass produces them. Hopefully you know how to use eclcce without DoCCE4U, if not, you have more research to do. :)

[lrosado]

Thanks EYES for the Idea will do tonight and see if that helps. I keep producing the same errors no matter what I do but will try to reduce passes as you said and will respond back with results.

[foxmid]

Here's your fix:

http://forum.doom9.org/showthread.php?s=&threadid=55526

This forum Rocks!