Burning Problem with LF-D310

[ibizamale]

i would appreciate any help on the following problem please

i have the following set up

AMD 2600XP 333
1.5GB DDR 400 SAMSUNG RAM
DVD-R/RAM LF-D310
CDRW LG 52-24-52
2 X 120GB ATA 133 HD (SEGATE OR MAXTOR)
ASUS NFORCE DELUXE MOTHERBOARD
128MB Ti4200 GFORCE 4 GFX

I have had this problem since i bought the dvd-ram in january this year

when i burn a dvd in prassi dvd the dvd burns fine but when played back on any standard dvd player it plays fine until anywhere from half way untill the end when it just stops and skips through to the menu again.

when i burn in nero it comes up with the following meassage
' there has been a possible read error which may cause a defective write would you like to continue'

when i do continue it locks up and i need to reboot the machine

i have tried the above with various dvd media and i have swaped the dvd-ram with my friends dvd-ram which is an identical model and the problem still persists

please help me

all the best

Liam

[David Hwang]

Try to rip and burn a DVD-5 movie. If it works, then the problem is
either authoring or encoding. It it doesn't work, then the problem is
either burning, disc, or your dvd player.

[ibizamale]

i have burnt dvd 5 movie i created one from my home video and it didn't work and i have used a dvd 5 from my collection and this didn't work either

i was thinking could this be a hardware fault within my computer would dodgy RAM cause this error

cheers

liam

[David Hwang]

What dvd player do you have? Can it play DVD-Rs created by
others without problem? Maybe you should try to play the
disc you have burnt on other dvd player.

[ibizamale]

i have a sanyo dvd player and a toshiba dvd cinema system and it jumps in both i alkso have tried playing it in my brother in law dvd player and it still jumps

i am completely wiping my computer today and gonna do some testing by puting a component in one at a time

i will let you know

also if it any help

when i burn in prassi it doesn't come up with any errors it just jump through playback

but when i go to burn in nero it come up with the following error
"there has been a possible read error during operation which may cause a defective write" "do you wish to continue" if i continue then the system locks

all the best liam

[David Hwang]

Originally posted by ibizamale
but when i go to burn in nero it come up with the following error
"there has been a possible read error during operation which may cause a defective write" "do you wish to continue" if i continue then the system locks

The error message looks like a disc or drive problem to me.

[disturbed1]

The LF-D310 needs be set on the Master bus, without DMA enabled.

If it's connected as slave, or if you have DMA enabled, read/write errors can occur.

[ibizamale]

i tried that by disabling it in the device manager and the errors still came up

i am pulling my hair out lol :sly:

i will try that again when i reinstall my system

by the way thanks to all who are trying to help me

i appreciate it alot