Log in

View Full Version : DVD2SVCD is not using CCE templates


Holomatrix
5th July 2003, 00:10
Hi, has anyone noticed that DVD2SVCD is not using the CCE templates? or is it just my system? I'll post the log but what happened was I was looking through a log I had done on a movie to check a few things and noticed that the CCE settings listed in the log were not what I have set in my template, like Image quality, anti noise. So here is the log showing a test I just did first not using the templates, image quality 14, anti noise 2 .... then did a recover and set it up to use my CCE Natural Picture template, but the CCE settings are still the same, unchanged but I know they are way different in my template.
Thanks

WNASPI32.DLL 4.6.0.1021
--------------------------------------------------------
- 04/07/2003 6:27:49 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.1.3 build 1
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 04/07/2003 6:27:52 PM
- Free on drive D: 11952.62 mb
- Internal rip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- J:\KANGAROO_JACK\VIDEO_TS\VTS_01_1.vob
- J:\KANGAROO_JACK\VIDEO_TS\VTS_01_2.vob
- J:\KANGAROO_JACK\VIDEO_TS\VTS_01_3.vob
- J:\KANGAROO_JACK\VIDEO_TS\VTS_01_4.vob
- J:\KANGAROO_JACK\VIDEO_TS\VTS_01_5.vob

Ripping: J:\KANGAROO_JACK\VIDEO_TS\VTS_01_1.vob
Ripping finished. Speed: 6644

--------------------------------------------------------
- 04/07/2003 6:28:14 PM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[D:\MovieEncode\DVD2AVI_Project_file] -IF=[D:\MovieEncode\VTS_01_1.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 04/07/2003 6:28:24 PM
- Free on drive D: 11822.83 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: D:\MovieEncode\Extracted_audio_1.ac3
Audio1 delay: -60 ms
Audio extraction finished.

--------------------------------------------------------
- 04/07/2003 6:28:28 PM
- Free on drive D: 11815.46 mb
- AUDIO conversion
--------------------------------------------------------

Encoding Audio. Filename: D:\MovieEncode\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "D:\MovieEncode\Extracted_audio_1.ac3" -output "D:\MOVIEE~3\Encoded_audio_1.mp2" -logfile "D:\MOVIEE~3\Encoded_audio_1.log" ) -azid( -L -3db -C 2db -c normal -s surround -g max ) -ota( -d -60 ) -2lame( -e -b 128 -m s )
Audio conversion of D:\MovieEncode\Extracted_audio_1.ac3 finished.

Audio conversion finished.

--------------------------------------------------------
- 04/07/2003 6:28:54 PM
- Free on drive D: 11813.34 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 834285788
AudioSectors: 2314704
VideoPAPO: 12887676
ScanOffsetBytes: 3961
SeqAligningBytes: 251756
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 0.00
PureMPEGStream: 818827686.53
Seconds: 142.68
CalcMPEGStream: 818827686.53
Frames: 3301
CDSize: 800.00
Number of CDs: 1
Cut point 796.00
Variable Settings:
Frames: 3301
Anti Noise Filter: 2
Passes: 1
Image Quality: 14
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 300
Max. bitrate: 2530
Avg. Bitrate: 2320
Aspect Ratio: 4:3 (No borders, encoded as 4:3)

---AVS Begin---
Import("D:\MOVIEE~3\RESAMP~1.AVS")
LoadPlugin("C:\PROGRA~1\DVD2SVCD\AVISYN~1.5PL\Mpeg2dec\MPEG2D~1.DLL")
mpeg2source("D:\MOVIEE~3\DVD2AV~1.D2V")
# -= AviSynth script by FitCD v1.1.2 =-
LanczosResize(448,448,0,0,720,480)
loadplugin("C:\Program Files\DVD2SVCD\YV12filters\deen.dll")
loadplugin("C:\Program Files\DVD2SVCD\YV12filters\Undot\Undot.dll")
Deen()
Undot()
AddBorders(16,16,16,16)
ConvertToYUY2()
ResampleAudio(44100)
----AVS End----

Closing program
CCE Max Speed: 0.830
Video Encoding finished.

--------------------------------------------------------
- 04/07/2003 6:35:09 PM
- Free on drive D: 11774.66 mb
- Video Pulldown
--------------------------------------------------------
Executing Pulldown. Commandline:
"C:\Program Files\DVD2SVCD\pulldown\pulldown.exe" "D:\MovieEncode\Encoded_Video_CCE_NTSC.mpv" "D:\MovieEncode\Pulldown_Encoded_Video_NTSC.mpv"
Video pulldown finished.

--------------------------------------------------------
- 04/07/2003 6:35:19 PM
- Free on drive D: 11736.88 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 04/07/2003 6:35:21 PM
- Free on drive D: 11736.88 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 04/07/2003 6:35:24 PM
- Free on drive D: 11736.88 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 04/07/2003 6:35:26 PM
- Free on drive D: 11736.88 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 796 mb

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\MovieEncode\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

CD-Image creation finished.

--------------------------------------------------------
- 04/07/2003 6:35:36 PM
- Free on drive D: 11696.89 mb
- SVCD Creation finished!
--------------------------------------------------------
--------------------------------------------------------
- 04/07/2003 6:38:28 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.1.3 build 1
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 04/07/2003 6:39:05 PM
- Free on drive D: 11656.92 mb
- Crash Recovery
- Restarting from: Video encoding
--------------------------------------------------------
- 04/07/2003 6:39:09 PM
- Free on drive D: 11656.92 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 834285788
AudioSectors: 2314704
VideoPAPO: 12887676
ScanOffsetBytes: 3961
SeqAligningBytes: 251756
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 0.00
PureMPEGStream: 818827686.53
Seconds: 142.68
CalcMPEGStream: 818827686.53
Frames: 3301
CDSize: 800.00
Number of CDs: 1
Cut point 796.00
Variable Settings:
Frames: 3301
Anti Noise Filter: 2
Passes: 1
Image Quality: 14
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 300
Max. bitrate: 2530
Avg. Bitrate: 2320
Aspect Ratio: 4:3 (No borders, encoded as 4:3)

---AVS Begin---
Import("D:\MOVIEE~3\RESAMP~1.AVS")
LoadPlugin("C:\PROGRA~1\DVD2SVCD\AVISYN~1.5PL\Mpeg2dec\MPEG2D~1.DLL")
mpeg2source("D:\MOVIEE~3\DVD2AV~1.D2V")
# -= AviSynth script by FitCD v1.1.2 =-
LanczosResize(448,448,0,0,720,480)
loadplugin("C:\Program Files\DVD2SVCD\YV12filters\deen.dll")
loadplugin("C:\Program Files\DVD2SVCD\YV12filters\Undot\Undot.dll")
Deen()
Undot()
AddBorders(16,16,16,16)
ConvertToYUY2()
ResampleAudio(44100)
----AVS End----

Closing program
CCE Max Speed: 0.840
Video Encoding finished.

--------------------------------------------------------
- 04/07/2003 6:45:21 PM
- Free on drive D: 11694.70 mb
- Video Pulldown
--------------------------------------------------------
Executing Pulldown. Commandline:
"C:\Program Files\DVD2SVCD\pulldown\pulldown.exe" "D:\MovieEncode\Encoded_Video_CCE_NTSC.mpv" "D:\MovieEncode\Pulldown_Encoded_Video_NTSC.mpv"
Video pulldown finished.

--------------------------------------------------------
- 04/07/2003 6:45:31 PM
- Free on drive D: 11696.88 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 04/07/2003 6:45:33 PM
- Free on drive D: 11696.87 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 04/07/2003 6:45:36 PM
- Free on drive D: 11696.87 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 04/07/2003 6:45:38 PM
- Free on drive D: 11696.87 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 796 mb

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\MovieEncode\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

CD-Image creation finished.

--------------------------------------------------------
- 04/07/2003 6:45:46 PM
- Free on drive D: 11656.90 mb
- SVCD Creation finished!
--------------------------------------------------------

ralphthedog
5th July 2003, 07:43
Same in my last log file using CCE 2.67 and the standard progressive template (from the how-to post). I wonder if the log is generated from the greyed out settings in the DVD2SVCD encoder tab rather than the template settings in CCE?

Holomatrix
6th July 2003, 01:01
Yeh, I guess there is no need for DVD2SVCD to log the actual template settings, probably no way to read them, but if you change the template in DVD2SVCD then check back in CCE's template setting the template has changed to the one you lasted picked in DVD2SVCD. so should be alright.