stanleycup
26th May 2003, 17:26
Using the following on a NTSC DVD Predator:
DoItFast4U 1.11
DoCCE4U 1.014
ReAuthorist 0.632
CCE 2.66.01.07
The DVD has 4 very small VTS's and the main movie VTS which is about
7 gig. It has a DD 5.1 and a DTS audio file. I've chosen to back up
everything on the DVD. It is not a multi-angle DVD.
The DoItFast4U portion was fine as was the DoCCE4U portion when I used the encode option in ReAuthorist. When I hit the AuthorIt button
in ReAuthorist, it generated the ReAuthorist.ecl and ReAuthorist.SCP
files but it generated these files within about 3 seconds. According to Doom's guide, he said that it should take quite a bit of time to generate. Is it normal that the ReAuthorist.ecl and ReAuthorist.SCP
is generated this quickly?
When I opened Scenarist, I got the following message when I open the
ReAuthorist.SCP file:
Error Duration of each slide should be at least 0.4 second.
Error Duration of each slide should be at least 0.4 second.
Error Duration of each slide should be at least 0.4 second.
Error Duration of each slide should be at least 0.4 second.
Error Duration of each slide should be at least 0.4 second.
Warning Quadrant or Sigma Design MPEG decoder is not present or the driver is not installed.
Warning Hardware decoding of video may not work.
When I go to the layout editor and hit start, I get the following
on the main movie VTS:
Error Still MPEG Video file is larger than Video buffer in DVD Spec("VTS__04_P01.16~9_1.MPV" has 1477930448 bytes).
Error Please reduce the bitrate in ProjectSettings or make the source still image simpler.
Error dvd_mux : DoMux Multiplexing Error
Error Terminated Multiplexing (project2.scn-VTS_04_PGC_01_t.vob).
Error Total bitrate is too HIGH. Please reduce the stream bitrate or the number of stream.
Error Multiplex is failed.
Info Multiplexing failed, Track<VTS_04_PGC_01>
Error MuxFromDB:MuxVTS failed
Error Multiplex failed
Error DVD files could not be created
Any ideas what I'm doing wrong?
DoItFast4U 1.11
DoCCE4U 1.014
ReAuthorist 0.632
CCE 2.66.01.07
The DVD has 4 very small VTS's and the main movie VTS which is about
7 gig. It has a DD 5.1 and a DTS audio file. I've chosen to back up
everything on the DVD. It is not a multi-angle DVD.
The DoItFast4U portion was fine as was the DoCCE4U portion when I used the encode option in ReAuthorist. When I hit the AuthorIt button
in ReAuthorist, it generated the ReAuthorist.ecl and ReAuthorist.SCP
files but it generated these files within about 3 seconds. According to Doom's guide, he said that it should take quite a bit of time to generate. Is it normal that the ReAuthorist.ecl and ReAuthorist.SCP
is generated this quickly?
When I opened Scenarist, I got the following message when I open the
ReAuthorist.SCP file:
Error Duration of each slide should be at least 0.4 second.
Error Duration of each slide should be at least 0.4 second.
Error Duration of each slide should be at least 0.4 second.
Error Duration of each slide should be at least 0.4 second.
Error Duration of each slide should be at least 0.4 second.
Warning Quadrant or Sigma Design MPEG decoder is not present or the driver is not installed.
Warning Hardware decoding of video may not work.
When I go to the layout editor and hit start, I get the following
on the main movie VTS:
Error Still MPEG Video file is larger than Video buffer in DVD Spec("VTS__04_P01.16~9_1.MPV" has 1477930448 bytes).
Error Please reduce the bitrate in ProjectSettings or make the source still image simpler.
Error dvd_mux : DoMux Multiplexing Error
Error Terminated Multiplexing (project2.scn-VTS_04_PGC_01_t.vob).
Error Total bitrate is too HIGH. Please reduce the stream bitrate or the number of stream.
Error Multiplex is failed.
Info Multiplexing failed, Track<VTS_04_PGC_01>
Error MuxFromDB:MuxVTS failed
Error Multiplex failed
Error DVD files could not be created
Any ideas what I'm doing wrong?