DVD2SVCD or AVI2SVCD not sychron

[Tweedy]

Hi all together,
i'm a newbie and i hope i make no mistakes. I use DVD2SVCD several times but the last 10 DVD convertings and also AVI convertings i get the problem that Audio is not synchron. I tried complete new installation of all tools and plugins but without success. Also i'm not able to convert a movie by using the MPEG5.1 Audio format. Below you can see the Logfile from my last try. The Movie is "Angel Eyes" and i Rip the complete DVD with Smartripper because i was not able to convert i directly.

THX in advance

Tweedy

[markrb]

Use cut and paste for the log file. Don't attach it.
What did you rip the DVD's with?

Mark

[Tweedy]

I use Smartripper Version 2.23 and i take a complete DVD Backup. Because i try to convert this DVD with Dolby Digital. Below you can find the log file and the SVCDInfo.txt file.

br

tweedy



WNASPI32.DLL 0.2.1.3
--------------------------------------------------------
- 23.02.2003 17:25:42
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.1.0 build 1c
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 23.02.2003 17:25:45
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Programme\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Programme\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[C:\Programme\DVD2SVCD\Movie\DVD2AVI_Project_file] -IF=[C:\TEMP\Movie\Angel_EYES\ANGEL_EYES_D5A\VTS_01_1.vob,C:\TEMP\Movie\Angel_EYES\ANGEL_EYES_D5A\VTS_01_2.vob,C:\TEMP\Movie\Angel_EYES\ANGEL_EYES_D5A\VTS_01_3.vob,C:\TEMP\Movie\Angel_EYES\ANGEL_EYES_D5A\VTS_01_4.vob,C:\TEMP\Movie\Angel_EYES\ANGEL_EYES_D5A\VTS_01_5.vob]
Framerate: 25000
DVD2AVI processing done.

--------------------------------------------------------
- 23.02.2003 17:28:33
- Free on drive C: 41275.40 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x81
Filename: C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.ac3
Audio1 delay: -111 ms
Audio extraction finished.

--------------------------------------------------------
- 23.02.2003 17:31:56
- Free on drive C: 41003.28 mb
- AUDIO conversion
--------------------------------------------------------

Encoding Audio. Filename: C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.ac3" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -azid( -L -3db -c normal -s surround -g max ) -ota( -d -111 ) -shibatch( --rate 44100 ) -2lame( -e -b 192 -m s )
Audio conversion of C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.ac3 finished.

Audio conversion finished.

--------------------------------------------------------
- 23.02.2003 17:49:49
- Free on drive C: 40868.75 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------

Executing Cinema Craft Encoder.
StreamSectors: 1668571576
AudioSectors: 145568388
VideoPAPO: 23592132
ScanOffsetBytes: 179082
SeqAligningBytes: 11381656
DVDBytes: 0
VideoEndHeader: 8
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 0.00
PureMPEGStream: 1487850310.00
Seconds: 5984.40
CalcMPEGStream: 1487850310.00
Frames: 149235
CDSize: 800.00
Number of CDs: 2
Cut point 796.00
Variable Settings:
Frames: 149235
Anti Noise Filter: Off
Passes: 2
Image Quality: 17
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 300
Max. bitrate: 2530
Avg. Bitrate: 1988
Aspect Ratio: 16:9 (borders added, encoded as 4:3)

---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\MPEG2Dec\mpeg2dec.dll")
mpeg2source("C:\PROGRA~1\DVD2SVCD\Movie\DVD2AV~1.D2V")
BicubicResize(480,432,0.0,0.6)
AddBorders(0,72,0,72)
ResampleAudio(44100)
----AVS End----

Closing program
CCE Max Speed: 1.380
Video Encoding finished.

--------------------------------------------------------
- 23.02.2003 21:33:42
- Free on drive C: 39424.09 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Programme\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 23.02.2003 21:33:45
- Free on drive C: 39424.09 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Programme\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 23.02.2003 21:33:47
- Free on drive C: 39424.09 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Programme\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 23.02.2003 21:33:49
- Free on drive C: 39424.08 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Programme\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 796 mb

Executing RunbbMPEG. Commandline:
"C:\Programme\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Programme\DVD2SVCD\Movie\bbMPEG_Muxed_File.mpg"
Length of C:\Programme\DVD2SVCD\Movie\bbMPEG_Muxed_File00.mpg
3000 Seconds
Offset in Seconds: 3002
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 796 mb

Executing RunbbMPEG. Commandline:
"C:\Programme\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Programme\DVD2SVCD\Movie\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

CD-Image creation finished.

--------------------------------------------------------
- 23.02.2003 22:33:03
- Free on drive C: 37835.61 mb
- SVCD Creation finished!
--------------------------------------------------------


GENERAL INFO
- Source: DVD (PAL)
- Movie Offset: 2 sec
- CD Overlap seconds: Yes, 10 sec
- Startup delays: Video: 180 ms Audio 1: 180 msAudio 2: 180 ms
- Video format: PAL
- Length: 01:39:29
- CD Images:

IMDB INFO:
Movie title:
User rating:
Directed by:
Writing credits:
Genre:
Tagline:
Plot outline:

VIDEO INFO:
- Encoder: Cinema Craft Encoder 2.50.1.0
- Encoding mode: Multipass VBR
- Passes: 2
- Max. bitrate: 2530
- Avg. bitrate: 1988
- Min. bitrate: 300
- Bias: 20
- Image Quality Prio: 17
- Antinoise filter: No
- Linear quant. scale: Yes
- Zigzag scan order: Yes
- Upper field first: No
- Progressive frames: Yes
- iDCT Algorithm: 32-bit SSE MMX
- Deinterlace: None
- Pulldown: No
- Width: 480
- Height: 576
- Matrix:
Intra:
8 16 19 22 26 27 29 34
16 16 22 24 27 29 34 37
19 22 26 27 29 34 34 38
22 22 26 27 29 34 37 40
22 26 27 29 32 35 40 48
26 27 29 32 35 40 48 58
26 27 29 34 38 46 56 69
27 29 35 38 46 56 69 83
Non-Intra:
16 17 18 19 20 21 22 23
17 18 19 20 21 22 23 24
18 19 20 21 22 23 24 25
19 20 21 22 23 24 26 27
20 21 22 23 25 26 27 28
21 22 23 24 26 27 28 30
22 23 24 26 27 28 30 31
23 24 25 27 28 30 31 33


AVISYNTH SCRIPT:
LoadPlugin("C:\PROGRA~1\DVD2SVCD\MPEG2Dec\mpeg2dec.dll")
mpeg2source("C:\PROGRA~1\DVD2SVCD\Movie\DVD2AV~1.D2V")
BicubicResize(480,432,0.0,0.6)
AddBorders(0,72,0,72)
ResampleAudio(44100)


AUDIO INFO:
- Audiostreams: 1
- Audio 1 Language: Deutsch
- Audio 1 Bitrate: 192
- Audio 1 Sample freq: 44100
- Audio 1 Mode: Stereo
- Audio 1 Besweet: "C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Programme\DVD2SVCD\Movie\Extracted_audio_1.ac3" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -azid( -L -3db -c normal -s surround -g max ) -ota( -d -111 ) -shibatch( --rate 44100 ) -2lame( -e -b 192 -m s )

SUBTITLE INFO:
- Subtitlestreams: 0
- Type:
- Sub. 1 Language:
- Sub. 2 Language:
- Sub. 3 Language:
- Sub. 4 Language:

AUTHORING INFO:
- CD Image program:

[markrb]

From the Q+A. I do suggest you read it.

Q24: My audio and video are not synced
A: This rarely happens. The most common reason is when a DVD have been ripped with an external ripper (like Smartripper). Always us internal routines when possible. (In the new DVD2SVCD versions, you can select "Rip Only" and convert the ripped vob files later). Another reason could be that a trailer is as the first chapter on the DVD (like Swordfish).

Mark

[Tweedy]

i search the whole forum for the same problem but i can't find any solution. the problem occurs also when i use ripping with internal routines and in the case i wan't to convert a AVI-file, i'dont have to rip it so it seems to me that the problem comes from one point after ripping. do somebody have the same experience?

tweedy

[markrb]

My point in that post was because you responded that you ripped with SmartRipper. This is a common problem with videos ripped with it.

What player are you using to determine that the video is not in Sync?
Is it your standalone or are you using a software player on your computer?
Whatever you do don't use Windows Media Player. Use PowerDVD or WinDVD on your computer.

Try dropping that 10 second overlap down to at least 6 if not lower. This wastes space on the disc anyway.

Have you been able to play SVCD's before?

Have you checked the DVD player list at www.vcdhelp.com to see if your DVD player has any known issues?

Next time you create the images uncheck the title pic. Some players have issues with that. You won't have to re-encode just use recover. After you load the d2s file go to the image tab and uncheck title pic. Then recover from SVCD creation I believe.

Mark

[Tweedy]

At this time i have converted approximatly 60 DVD's with DVD2SVCD. For playing the SVCD's i use: 1. Tower with Pentium 4 2,66GHz, 512MB, NVIDEA Geforce 4 TI4200; 2. Laptop with Pentium 3 and my Standalone DVD-Player. In normal cases i use every time PowerDVD and i tried also several other players. My standalone Player is a Philips which also supports SVCD/VCD. And that's what i write up to now i have no problems using this configuration: Title pic and Overlap 10 sec but i will try out tips.

Tweedy

[etherthief]

Hi Tweedy,

me, I have the same problem - but only with AVI2SVCD, DVD2SVCD works fine... I've searched for the solution everywhere, too, but it seems like a generic error of DVD2SVCD :(

Etherthief

[DDogg]

I've searched for the solution everywhere Where? Have you tried beta 7 available in the top sticky? Also, see the bottom posts in that thread.
but it seems like a generic error of DVD2SVCD What is the rational for this statement? What was your method of research and data, point by point, that allowed you come to this conclusion. If you have found something via research, please share it with us so that the author of the program can fix it.

[Tweedy]

Hi all,

it seems that the problem is solved. Maybe that some installation/deinstallation of SW damaged some other files. After setup my machine from scratch everything works fine.

Thanks for your help.

Tweedy