VegasF6
8th January 2003, 18:30
Warning in advance, this post is REALLY long, but I tried to give all the information I possible could:
Hello Forum,
I am trying to convert a divx to svcd following the guide from nicky's guides. Besides really slow performance on the audio for some reason, I get this error "Error 59: Failed to sync to payload's start position : "C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa"
The .MPA file in the default folder is only 1kb, and the .mp2 is zero KB. Could someone perhaps explain what this error means, and at what point in the conversion something is going wrong?
I am running an abit kt266a m/b with an AMD 1600, and 512 megs ddr. Game Theater XP sound card. No swap file, swap file resides in memory instead. Plenty of hard drive space, and HD speed.
Here is the information virtual dub gives me about the .avi file
640x352 23.976fps, divx 4, low motion codec, 48,000HZ, 2 channel stereo mp3 codec.
And here is the dvd2svcd log file,
WNASPI32.DLL 4.71.1.0
--------------------------------------------------------
- 1/7/2003 4:50:28 PM
- AVI to SVCD Conversion
- AVI2SVCD ver. 1.1.0 build 1
--------------------------------------------------------
Initializing
Initializing finished.
--------------------------------------------------------
- 1/7/2003 4:50:31 PM
- Free on drive C: 18104.65 mb
- AUDIO Extraction
--------------------------------------------------------
Audio extraction finished.
--------------------------------------------------------
- 1/7/2003 4:50:31 PM
- Free on drive C: 18104.65 mb
- AUDIO conversion
--------------------------------------------------------
Encoding Audio. Filename: C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -ota( -g max ) -shibatch( --rate 44100 ) -2lame( -e -b 192 -m s )
Audio conversion of C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa finished.
Audio conversion finished.
--------------------------------------------------------
- 1/7/2003 4:50:44 PM
- Free on drive C: 18103.41 mb
- Converting Pictures
--------------------------------------------------------
Converting: C:\Program Files\DVD2SVCD\DefaultTitlepicture.bmp
Converting: C:\Program Files\DVD2SVCD\DefaultChangeCD.bmp
Finished converting pictures
--------------------------------------------------------
- 1/7/2003 4:51:00 PM
- Free on drive C: 18101.22 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------
Executing Cinema Craft Encoder.
StreamSectors: 1665085576
AudioSectors: 166342624
VideoPAPO: 23216328
ScanOffsetBytes: 196548
SeqAligningBytes: 12491717
DVDBytes: 0
VideoEndHeader: 8
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 600.00
PureMPEGStream: 1462838350.67
Seconds: 6838.41
CalcMPEGStream: 1462838350.67
Frames: 163790
CDSize: 800.00
Number of CDs: 2
Cut point 795.00
Variable Settings:
Frames: 163790
Anti Noise Filter: Off
Passes: 4
Image Quality: 17
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 300
Max. bitrate: 2530
Avg. Bitrate: 1711
Aspect Ratio: 4:3 (No borders, encoded as 4:3)
---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\MPEG2Dec\mpeg2dec.dll")
AVISource("D:\NEWSBI~1\ALTBIN~1.DIV\ADAPTA~1.AVI",False)
ConvertToYUY2()
BicubicResize(480,480,0.0,0.6)
AddBorders(0,0,0,0)
ResampleAudio(44100)
----AVS End----
Closing program
CCE Max Speed: 1.620
Video Encoding finished.
--------------------------------------------------------
- 1/8/2003 3:37:49 AM
- Free on drive C: 18661.91 mb
- Video Pulldown
--------------------------------------------------------
Executing Pulldown. Commandline:
"C:\Program Files\DVD2SVCD\pulldown\pulldown.exe" "C:\Program Files\DVD2SVCD\Movie\Encoded_Video_CCE_NTSC.mpv" "C:\Program Files\DVD2SVCD\Movie\Pulldown_Encoded_Video_NTSC.mpv"
Video pulldown finished.
--------------------------------------------------------
- 1/8/2003 3:41:41 AM
- Free on drive C: 17268.75 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\TitlePicture.bmp.mpg"
--------------------------------------------------------
- 1/8/2003 3:41:47 AM
- Free on drive C: 17268.63 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\ChangeCDPicture.bmp.mpg"
--------------------------------------------------------
- 1/8/2003 3:41:53 AM
- Free on drive C: 17268.66 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 1/8/2003 3:41:57 AM
- Free on drive C: 17268.66 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 795 mb
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File.mpg"
--------------------------------------------------------
- 1/8/2003 5:12:09 AM
- AVI to SVCD Conversion
- AVI2SVCD ver. 1.1.0 build 1
--------------------------------------------------------
Initializing
Initializing finished.
--------------------------------------------------------
- 1/8/2003 5:12:11 AM
- Free on drive C: 17268.65 mb
- Crash Recovery
- Restarting from: Muxing and Cutting
--------------------------------------------------------
- 1/8/2003 5:12:14 AM
- Free on drive C: 17268.65 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\TitlePicture.bmp.mpg"
--------------------------------------------------------
- 1/8/2003 5:12:20 AM
- Free on drive C: 17268.43 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\ChangeCDPicture.bmp.mpg"
--------------------------------------------------------
- 1/8/2003 5:12:27 AM
- Free on drive C: 17268.41 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 1/8/2003 5:12:31 AM
- Free on drive C: 17268.41 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 795 mb
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File.mpg"
As you can see, the point where the video encoding ended, and the video pull down started is like 11 hours later. I had left, and when I got back to the pc, there was a message I didn't understand, but I hit ok and it continued. I don't THINK the problem was during the video encoding, it appears to be an audio problem.
Next I will post the encoded audio log, where I think the problem is taking place, as this is where it appeared to stop.
Error 59: Failed to sync to payload's start position : "C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa"BeSweet v1.5b1 by DSPguru.
--------------------------
Using hip.dll v1.13 by Myers Carpenter <myers@users.sf.net>
Using Shibatch.dll v0.2 by Naoki Shibata & DSPguru (shibatch.sourceforge.net).
Using MP2enc.dll v1.129 (23/5/2002), Engine 1.129 <http://www.cdex.n3.net>.
Logging start : 01/07/03 , 16:50:38.
C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe -core( -input C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa -output C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2 -logfile C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log ) -ota( -g max ) -shibatch( --rate 44100 ) -2lame( -e -b 192 -m s )
[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa
[00:00:00:000] | Output: C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:000] | Overall Track Gain: 1.#IOdB
[00:00:00:000] +------ Shibatch -----
[00:00:00:000] | Source Sample-Rate: 48.0KHz
[00:00:00:000] | Dest. Sample-Rate: 44.1KHz
[00:00:00:000] | Attenuation : 0.0db
[00:00:00:000] +------- MP2ENC ------
[00:00:00:000] | Bitrate method : CBR
[00:00:00:000] | MP2 bitrate : 192
[00:00:00:000] | Channels Mode : Stereo
[00:00:00:000] | Error Protection: Yes
[00:00:00:000] +---------------------
Error 32: No input-data was found (wrong substream?)
Quiting...
[00:00:00:000] Conversion Completed !
Logging ends : 01/07/03 , 16:50:38.
Now I know I didn't have to convert the audio to 44Khz, but since I have put so much time into this at this point I would like to finish with my current project, if possible. Whenever I try and recover (under the misc tab) at the muxing and cutting point, I get error 59.
I think this will probably be enough info to help, but I will post the dvd2svcd.ini as stated in the mandatory read.
[
Thank you very very much in advance.
VegasF6
Message too long, will post ini file in reply
Hello Forum,
I am trying to convert a divx to svcd following the guide from nicky's guides. Besides really slow performance on the audio for some reason, I get this error "Error 59: Failed to sync to payload's start position : "C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa"
The .MPA file in the default folder is only 1kb, and the .mp2 is zero KB. Could someone perhaps explain what this error means, and at what point in the conversion something is going wrong?
I am running an abit kt266a m/b with an AMD 1600, and 512 megs ddr. Game Theater XP sound card. No swap file, swap file resides in memory instead. Plenty of hard drive space, and HD speed.
Here is the information virtual dub gives me about the .avi file
640x352 23.976fps, divx 4, low motion codec, 48,000HZ, 2 channel stereo mp3 codec.
And here is the dvd2svcd log file,
WNASPI32.DLL 4.71.1.0
--------------------------------------------------------
- 1/7/2003 4:50:28 PM
- AVI to SVCD Conversion
- AVI2SVCD ver. 1.1.0 build 1
--------------------------------------------------------
Initializing
Initializing finished.
--------------------------------------------------------
- 1/7/2003 4:50:31 PM
- Free on drive C: 18104.65 mb
- AUDIO Extraction
--------------------------------------------------------
Audio extraction finished.
--------------------------------------------------------
- 1/7/2003 4:50:31 PM
- Free on drive C: 18104.65 mb
- AUDIO conversion
--------------------------------------------------------
Encoding Audio. Filename: C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa" -output "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2" -logfile "C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log" ) -ota( -g max ) -shibatch( --rate 44100 ) -2lame( -e -b 192 -m s )
Audio conversion of C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa finished.
Audio conversion finished.
--------------------------------------------------------
- 1/7/2003 4:50:44 PM
- Free on drive C: 18103.41 mb
- Converting Pictures
--------------------------------------------------------
Converting: C:\Program Files\DVD2SVCD\DefaultTitlepicture.bmp
Converting: C:\Program Files\DVD2SVCD\DefaultChangeCD.bmp
Finished converting pictures
--------------------------------------------------------
- 1/7/2003 4:51:00 PM
- Free on drive C: 18101.22 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------
Executing Cinema Craft Encoder.
StreamSectors: 1665085576
AudioSectors: 166342624
VideoPAPO: 23216328
ScanOffsetBytes: 196548
SeqAligningBytes: 12491717
DVDBytes: 0
VideoEndHeader: 8
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 600.00
PureMPEGStream: 1462838350.67
Seconds: 6838.41
CalcMPEGStream: 1462838350.67
Frames: 163790
CDSize: 800.00
Number of CDs: 2
Cut point 795.00
Variable Settings:
Frames: 163790
Anti Noise Filter: Off
Passes: 4
Image Quality: 17
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 300
Max. bitrate: 2530
Avg. Bitrate: 1711
Aspect Ratio: 4:3 (No borders, encoded as 4:3)
---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\MPEG2Dec\mpeg2dec.dll")
AVISource("D:\NEWSBI~1\ALTBIN~1.DIV\ADAPTA~1.AVI",False)
ConvertToYUY2()
BicubicResize(480,480,0.0,0.6)
AddBorders(0,0,0,0)
ResampleAudio(44100)
----AVS End----
Closing program
CCE Max Speed: 1.620
Video Encoding finished.
--------------------------------------------------------
- 1/8/2003 3:37:49 AM
- Free on drive C: 18661.91 mb
- Video Pulldown
--------------------------------------------------------
Executing Pulldown. Commandline:
"C:\Program Files\DVD2SVCD\pulldown\pulldown.exe" "C:\Program Files\DVD2SVCD\Movie\Encoded_Video_CCE_NTSC.mpv" "C:\Program Files\DVD2SVCD\Movie\Pulldown_Encoded_Video_NTSC.mpv"
Video pulldown finished.
--------------------------------------------------------
- 1/8/2003 3:41:41 AM
- Free on drive C: 17268.75 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\TitlePicture.bmp.mpg"
--------------------------------------------------------
- 1/8/2003 3:41:47 AM
- Free on drive C: 17268.63 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\ChangeCDPicture.bmp.mpg"
--------------------------------------------------------
- 1/8/2003 3:41:53 AM
- Free on drive C: 17268.66 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 1/8/2003 3:41:57 AM
- Free on drive C: 17268.66 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 795 mb
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File.mpg"
--------------------------------------------------------
- 1/8/2003 5:12:09 AM
- AVI to SVCD Conversion
- AVI2SVCD ver. 1.1.0 build 1
--------------------------------------------------------
Initializing
Initializing finished.
--------------------------------------------------------
- 1/8/2003 5:12:11 AM
- Free on drive C: 17268.65 mb
- Crash Recovery
- Restarting from: Muxing and Cutting
--------------------------------------------------------
- 1/8/2003 5:12:14 AM
- Free on drive C: 17268.65 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\TitlePicture.bmp.mpg"
--------------------------------------------------------
- 1/8/2003 5:12:20 AM
- Free on drive C: 17268.43 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\ChangeCDPicture.bmp.mpg"
--------------------------------------------------------
- 1/8/2003 5:12:27 AM
- Free on drive C: 17268.41 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 1/8/2003 5:12:31 AM
- Free on drive C: 17268.41 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 795 mb
Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\Movie\bbMPEG_Muxed_File.mpg"
As you can see, the point where the video encoding ended, and the video pull down started is like 11 hours later. I had left, and when I got back to the pc, there was a message I didn't understand, but I hit ok and it continued. I don't THINK the problem was during the video encoding, it appears to be an audio problem.
Next I will post the encoded audio log, where I think the problem is taking place, as this is where it appeared to stop.
Error 59: Failed to sync to payload's start position : "C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa"BeSweet v1.5b1 by DSPguru.
--------------------------
Using hip.dll v1.13 by Myers Carpenter <myers@users.sf.net>
Using Shibatch.dll v0.2 by Naoki Shibata & DSPguru (shibatch.sourceforge.net).
Using MP2enc.dll v1.129 (23/5/2002), Engine 1.129 <http://www.cdex.n3.net>.
Logging start : 01/07/03 , 16:50:38.
C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe -core( -input C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa -output C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2 -logfile C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.log ) -ota( -g max ) -shibatch( --rate 44100 ) -2lame( -e -b 192 -m s )
[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : C:\Program Files\DVD2SVCD\Movie\Extracted_audio_1.mpa
[00:00:00:000] | Output: C:\PROGRA~1\DVD2SVCD\Movie\Encoded_audio_1.mp2
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:000] | Overall Track Gain: 1.#IOdB
[00:00:00:000] +------ Shibatch -----
[00:00:00:000] | Source Sample-Rate: 48.0KHz
[00:00:00:000] | Dest. Sample-Rate: 44.1KHz
[00:00:00:000] | Attenuation : 0.0db
[00:00:00:000] +------- MP2ENC ------
[00:00:00:000] | Bitrate method : CBR
[00:00:00:000] | MP2 bitrate : 192
[00:00:00:000] | Channels Mode : Stereo
[00:00:00:000] | Error Protection: Yes
[00:00:00:000] +---------------------
Error 32: No input-data was found (wrong substream?)
Quiting...
[00:00:00:000] Conversion Completed !
Logging ends : 01/07/03 , 16:50:38.
Now I know I didn't have to convert the audio to 44Khz, but since I have put so much time into this at this point I would like to finish with my current project, if possible. Whenever I try and recover (under the misc tab) at the muxing and cutting point, I get error 59.
I think this will probably be enough info to help, but I will post the dvd2svcd.ini as stated in the mandatory read.
[
Thank you very very much in advance.
VegasF6
Message too long, will post ini file in reply