Access Violation

[Lecture]

I use DVD2svcd ver. 1.1.0 build 1c, when I ripped Spiderman I get “Access Violation” when using Internal routines,
so I use vStrip. But now I get this error: “Access violation at address 004ADBAE in module ‘DVD2SVCD.exe’.
Read of address 0194230F. ” when the program starts with audio extraction.
When I use Smartripper, I get the same error when audio extraction starts.

WNASPI32.DLL 4.6.0.1021
Key found: CBE50E4724
--------------------------------------------------------
- 5-1-2003 01:02:40
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.1.0 build 1c
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 5-1-2003 01:02:43
- Analyzing subtitles
--------------------------------------------------------
Subtitle found: StreamID: 0x28 Language: Nederlands
Subtitle found: StreamID: 0x27 Language: English
Subtitle found: StreamID: 0x24 Language: Nederlands
Subtitle found: StreamID: 0x25 Language: Nederlands
Subtitle found: StreamID: 0x26 Language: English
Subtitle found: StreamID: 0x23 Language: Hindi
Subtitle found: StreamID: 0x21 Language: English
Subtitle found: StreamID: 0x22 Language: Nederlands
Subtitle found: StreamID: 0x20 Language: English

Executing subtitle selection/verification.
Subtitle selection/verification accepted.
1 subtitle streams selected.
Saving Subtitles ini file
--------------------------------------------------------
- 5-1-2003 01:07:52
- Free on drive d: 24153.93 mb
- vStrip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- M:\VIDEO_TS\VTS_01_1.vob
- M:\VIDEO_TS\VTS_01_2.vob
- M:\VIDEO_TS\VTS_01_3.vob
- M:\VIDEO_TS\VTS_01_4.vob
- M:\VIDEO_TS\VTS_01_5.vob

Saving the vStrip filelist:
- d:\DVD2SVCD\Movie\vStrip.lst

Executing vStrip. Commandline:
"d:\DVD2SVCD\vStrip\vStrip.exe" @"d:\DVD2SVCD\Movie\vStrip.lst" -i"d:\DVD2SVCD\Movie\VTS_01_0.IFO"
-j1 -$1024 -p0 -o"d:\DVD2SVCD\Movie\VTS_01.vob"
--------------------------------------------------------
- 5-1-2003 01:38:11
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- d:\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"d:\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[d:\DVD2SVCD\Movie\DVD2AVI_Project_file] -IF=[d:\DVD2SVCD\Movie\VTS_01_1.vob,d:\DVD2SVCD\Movie\VTS_01_2.vob,d:\DVD2SVCD\Movie\VTS_01_3.vob,
d:\DVD2SVCD\Movie\VTS_01_4.vob,d:\DVD2SVCD\Movie\VTS_01_5.vob]
Framerate: 25000
DVD2AVI processing done.

--------------------------------------------------------
- 5-1-2003 01:40:37
- Free on drive d: 19502.19 mb
- Extracting the subtitles.
--------------------------------------------------------

Subtitle extraction finished. Extracted these subtitles:
SVCD Stream no: 1 Language: Nederlands Num. of subs: 979

Saving Subtitle Timecodes.
Permanent subtitles.
Saving Subtitles ini file
--------------------------------------------------------
- 5-1-2003 01:54:53
- Free on drive d: 19463.46 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: d:\DVD2SVCD\Movie\Extracted_audio_1.ac3
EAccessViolation Access violation at address 004ADBAE in module 'DVD2SVCD.exe'. Read of address 0194230F

Lecture

[UltimateDBZ]

Does this happen with other DVDs?
You tried a complete uninstall/reinstall of DVD2SVCD?

[Lecture]

This is the first time I had this kind of troubles with DVD2SVCD.

Because I found nothing about my problems in the forum, I have install an old version of DVD2SVCD 1.0.9. I have used the file I ripped with vStrip and this time I had no problems at al.
I am now busy with another movie with ver.1.1.0 build 1c and so long I have no trouble.

When the movie is ready I will try spiderman again, I will let you know of what the result is.

Lecture

[Lecture]

Maybe it is a bug, because when I use DVD2SVCD ver. 1.1.0 build 1c, to make a SVCD from Spiderman I get again a error at the same place as the first time. When I use DVD2SVCD ver. 1.0.9 build 3 I have no problem at al.
I tried it 5 times. I have install DVD2SVCD ver. 1.1.0 build 1c to a new directory, restart pc, complete uninstall/reinstall en so on, I have no problem until I want to doe Spiderman then I get a error.

--------------------------------------------------------
6-1-2003 08:36:25
- Free on drive d: 3846.64 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: d:\DVD2SVCD\Movie\Extracted_audio_1.ac3
EAccessViolation Access violation at address 004ADBAE in module 'DVD2SVCD.exe'. Read of address 01F00CCB

--------------------------------------------------------
- 6-1-2003 09:23:01
- Free on drive D: 4120.71 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: D:\DVD2SVCD\Movie\Extracted_audio_1.ac3
EAccessViolation Access violation at address 004ADBAE in module 'DVD2SVCD.exe'. Read of address 01DC58AE

Lecture

[daveidmx]

i also get an access violation at the same address during "audio extraction"

encoding Austin Powers Goldmember R1 NTSC 16x9 on P4 Northwood, Sis651, ATI AIW 32MB ("7200"), Win XP Pro (latest updates a/o Jan 18)







WNASPI32.DLL 4.5.7.1008
--------------------------------------------------------
- 1/18/2003 10:07:12 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.1.0 build 1c
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 1/18/2003 10:07:15 PM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[E:\DVD2SVCD\DVD2AVI_Project_file] -IF=[D:\movietemp\powers\VTS_01_1.vob,D:\movietemp\powers\VTS_01_2.vob,D:\movietemp\powers\VTS_01_3.vob,D:\movietemp\powers\VTS_01_4.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 1/18/2003 10:08:44 PM
- Free on drive E: 24419.01 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: E:\DVD2SVCD\Extracted_audio_1.ac3
EAccessViolation Access violation at address 004ADBAE in module 'DVD2SVCD.exe'. Read of address 01CAAB2B

[mrbass]

WNASPI32.DLL 4.5.7.1008
which version is that? try 4.6 or 4.71...might be problems with 4.72 though. Just a rumor though.

[daveidmx]

just updated to 4.70 (what was online at adaptec.) same error. will continue to explore this possibility.

thx for the post, tho, mrbass!