the image files fale or only makes one of two

[jackflash44301]

can someone help me with a cdimage problem. It seems that some how the cd image fales when i use the defalt settings and i was wondering if ther is a way to just use the vcdxbuild imager by itself to see were the error is instead of runing the hole dvd2vcd program again. By-the-way im on a win2000 system if that means much. If theres a chapeter that i mist in the must read section just lut me know its there or a ideal were its at.
P.S. Been reading this form for about 2 months and u guys are doing a hell of a job, thinks for all the time and help.


bitching about the free pie.:D

[UltimateDBZ]

Post your logfile.

And you don't have to redo the entire D2S conversion, just do a crash recovery from wherever it last failed.

[jackflash44301]

altimateDBZ,
Thinks for the quick reply. It seems to be faleing at the second bin/cue file. Could it be it was incoded at to big of size? The bbmpeg_muxed_file001 is 1.02gig's. Is it postible i have a setting rong or need to change a defalt setting?

--DEBUG: EEL sysid=[F:\Documents and Settings\Administrator\Desktop\movie\image fles\VCDXBuild_Script_1.xml] pubid=[(null)]
--DEBUG: EEL sysid=[http://www.gnu.org/software/vcdimager/videocd.dtd] pubid=[-//GNU//DTD VideoCD//EN]
++ WARN: initializing libvcd 0.7.12 [cygwin/i686]
++ WARN:
++ WARN: this is the UNSTABLE development branch!
++ WARN: use only if you know what you are doing
++ WARN: see http://www.hvrlab.org/~hvr/vcdimager/ for more information
++ WARN:
--DEBUG: changed volume number to 1
--DEBUG: changed volume count to 2
--DEBUG: changed restriction number to 0
--DEBUG: changing 'next volume use sequence 2' to 0
--DEBUG: changing 'next volume use lid 2' to 0
--DEBUG: changing 'relaxed aps' to 0
--DEBUG: changing 'update scan offsets' to 0
--DEBUG: adding pbc (chapter-00/2)
--DEBUG: adding pbc (chapter-01/2)
--DEBUG: adding pbc (chapter-02/2)
--DEBUG: adding pbc (chapter-03/2)
--DEBUG: adding pbc (chapter-04/2)
--DEBUG: adding pbc (chapter-05/2)
--DEBUG: adding pbc (chapter-06/2)
--DEBUG: adding pbc (chapter-07/2)
--DEBUG: adding pbc (chapter-08/2)
--DEBUG: adding pbc (chapter-09/2)
--DEBUG: adding pbc (chapter-10/2)
--DEBUG: adding pbc (ChangeCD/2)
--DEBUG: adding pbc (end/3)
--DEBUG: adding segment #0, F:\Documents and Settings\Administrator\Desktop\movie\TitlePicture.bmp.mpg
--DEBUG: strange (possibly non-compliant) user_data seen...
--DEBUG: pts start offset 0.213367 (max pts = 0.246733)
--DEBUG: playing time 0.033367
INFO: scanning mpeg segment item #0 for scanpoints...
--DEBUG: already scanned... not rescanning
--DEBUG: SPI length is 9 sector(s), allocated 1 segment(s)
--DEBUG: adding segment #1, F:\Documents and Settings\Administrator\Desktop\movie\ChangeCDPicture.bmp.mpg
--DEBUG: strange (possibly non-compliant) user_data seen...
--DEBUG: pts start offset 0.213367 (max pts = 0.246733)
--DEBUG: playing time 0.033367
INFO: scanning mpeg segment item #1 for scanpoints...
--DEBUG: already scanned... not rescanning
--DEBUG: SPI length is 6 sector(s), allocated 1 segment(s)
--DEBUG: sequence count 1
--DEBUG: adding sequence #0, F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File00.mpg
--DEBUG: pts start offset 0.213367 (max pts = 2915.959533)
--DEBUG: playing time 2915.746167
INFO: scanning mpeg sequence item #0 for scanpoints...
--DEBUG: already scanned... not rescanning
--DEBUG: pbc: psd size 1160 (extended psd 0)
--DEBUG: iso9660: highest alloced sector is 539 (using 540 as isosize)
--DEBUG: requested entry point (id=entry-chapt-01) at 0.000000, closest possible entry point at 0.133467
--DEBUG: requested entry point (id=entry-chapt-02) at 155.240000, closest possible entry point at 154.954800
--DEBUG: requested entry point (id=entry-chapt-03) at 393.640000, closest possible entry point at 393.309578
--DEBUG: requested entry point (id=entry-chapt-04) at 924.050000, closest possible entry point at 923.839578
--DEBUG: requested entry point (id=entry-chapt-05) at 1224.640000, closest possible entry point at 1224.973744
--DEBUG: requested entry point (id=entry-chapt-06) at 1547.090000, closest possible entry point at 1546.962078
--DEBUG: requested entry point (id=entry-chapt-07) at 1614.030000, closest possible entry point at 1613.695411
--DEBUG: requested entry point (id=entry-chapt-08) at 1922.540000, closest possible entry point at 1922.720800
--DEBUG: requested entry point (id=entry-chapt-09) at 2553.380000, closest possible entry point at 2553.133911
--DEBUG: requested entry point (id=entry-chapt-10) at 2886.970000, closest possible entry point at 2886.717167
++ WARN: generated image (359466 sectors [79:52.66]) may not fit on 74min CDRs (333000 sectors)
--DEBUG: OGT streams available: 0 0 0 0
--DEBUG: OGT streams available: 0 0 0 0
--DEBUG: OGT streams available: 0 0 0 0
INFO: writing track 1 (ISO9660)...
--DEBUG: setting EOR for SeqEnd at packet# 7 ('segment-titlepicture')
--DEBUG: setting EOR for SeqEnd at packet# 4 ('segment-changecd')
INFO: writing file `EXTRA/DVD2SVCD.XML' (9982 bytes)
INFO: writing file `EXTRA/SVCDINFO.TXT' (1789 bytes)
INFO: writing track 2, MPEG2, NTSC 2/3 D-1 (480x480/30fps), audio[0]: l2/44.1kHz/128kbps/stereo ...
--DEBUG: MPEG packet statistics: 338279 video, 20346 audio, 0 zero, 0 ogt, 1 unknown
--DEBUG: writting post-gap ('leadout pregap')...
INFO: finished ok, image created with 359466 sectors [79:52.66]


**************************************************************

--DEBUG: EEL sysid=[F:\Documents and Settings\Administrator\Desktop\movie\image fles\VCDXBuild_Script_2.xml] pubid=[(null)]
--DEBUG: EEL sysid=[http://www.gnu.org/software/vcdimager/videocd.dtd] pubid=[-//GNU//DTD VideoCD//EN]
++ WARN: initializing libvcd 0.7.12 [cygwin/i686]
++ WARN:
++ WARN: this is the UNSTABLE development branch!
++ WARN: use only if you know what you are doing
++ WARN: see http://www.hvrlab.org/~hvr/vcdimager/ for more information
++ WARN:
--DEBUG: changed volume number to 2
--DEBUG: changed volume count to 2
--DEBUG: changed restriction number to 0
--DEBUG: changing 'next volume use sequence 2' to 0
--DEBUG: changing 'next volume use lid 2' to 0
--DEBUG: changing 'relaxed aps' to 0
--DEBUG: changing 'update scan offsets' to 0
--DEBUG: adding pbc (chapter-01/2)
--DEBUG: adding pbc (chapter-02/2)
--DEBUG: adding pbc (chapter-03/2)
--DEBUG: adding pbc (chapter-04/2)
--DEBUG: adding pbc (chapter-05/2)
--DEBUG: adding pbc (chapter-06/2)
--DEBUG: adding pbc (chapter-07/2)
--DEBUG: adding pbc (chapter-08/2)
--DEBUG: adding pbc (chapter-09/2)
--DEBUG: adding pbc (chapter-10/2)
--DEBUG: adding pbc (chapter-11/2)
--DEBUG: adding pbc (chapter-12/2)
--DEBUG: adding pbc (chapter-13/2)
--DEBUG: adding pbc (chapter-14/2)
--DEBUG: adding pbc (chapter-15/2)
--DEBUG: adding pbc (chapter-16/2)
--DEBUG: adding pbc (chapter-17/2)
--DEBUG: adding pbc (chapter-18/2)
--DEBUG: adding pbc (chapter-19/2)
--DEBUG: adding pbc (end/3)
--DEBUG: sequence count 1
--DEBUG: adding sequence #0, F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File01.mpg
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:00.49]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:01.72]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:03.14]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:04.36]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:05.62]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:07.10]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:08.22]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:09.26]
++ WARN: mpeg user scan data: from now on, scan information data errors will not be reported anymore---consider enabling the 'update scan offsets' option, if it is not enabled already!
--DEBUG: pts start offset 0.230044 (max pts = 3801.477500)
--DEBUG: playing time 3801.247456
INFO: scanning mpeg sequence item #0 for scanpoints...
--DEBUG: already scanned... not rescanning
--DEBUG: pbc: psd size 2968 (extended psd 0)
--DEBUG: iso9660: highest alloced sector is 247 (using 300 as isosize)
--DEBUG: requested entry point (id=entry-chapt-01) at 0.000000, closest possible entry point at 0.116789
--DEBUG: requested entry point (id=entry-chapt-02) at 152.280000, closest possible entry point at 152.152000
--DEBUG: requested entry point (id=entry-chapt-03) at 440.190000, closest possible entry point at 439.889456
--DEBUG: requested entry point (id=entry-chapt-04) at 677.010000, closest possible entry point at 676.709367
--DEBUG: requested entry point (id=entry-chapt-05) at 984.570000, closest possible entry point at 984.600289
--DEBUG: requested entry point (id=entry-chapt-06) at 1024.980000, closest possible entry point at 1024.640289
--DEBUG: requested entry point (id=entry-chapt-07) at 1197.320000, closest possible entry point at 1197.312789
--DEBUG: requested entry point (id=entry-chapt-08) at 1257.420000, closest possible entry point at 1257.089167
--DEBUG: requested entry point (id=entry-chapt-09) at 1407.610000, closest possible entry point at 1407.239167
--DEBUG: requested entry point (id=entry-chapt-10) at 1491.320000, closest possible entry point at 1491.490000
--DEBUG: requested entry point (id=entry-chapt-11) at 1576.070000, closest possible entry point at 1575.740833
--DEBUG: requested entry point (id=entry-chapt-12) at 1752.580000, closest possible entry point at 1752.751000
--DEBUG: requested entry point (id=entry-chapt-13) at 1871.450000, closest possible entry point at 1871.202667
--DEBUG: requested entry point (id=entry-chapt-14) at 2293.370000, closest possible entry point at 2293.291000
--DEBUG: requested entry point (id=entry-chapt-15) at 2679.970000, closest possible entry point at 2680.344333
--DEBUG: requested entry point (id=entry-chapt-16) at 3012.890000, closest possible entry point at 3013.210200
--DEBUG: requested entry point (id=entry-chapt-17) at 3200.240000, closest possible entry point at 3200.063533
--DEBUG: requested entry point (id=entry-chapt-18) at 3259.010000, closest possible entry point at 3258.755500
--DEBUG: requested entry point (id=entry-chapt-19) at 3331.290000, closest possible entry point at 3331.328000
**ERROR: image too big (472298 sectors > 449850 sectors)

bitching about free pie.:D

[UltimateDBZ]

Actually, what I need is the DVD2SVCD logfile.

And 1.02gb does seem rather large, it is possible that you accidentally messed up one of the settings, and also possible that it's just a flat out error. We'll need the logfile to tell...

[jackflash44301]

ultmateDBZ,
think u mist the last post because i did add the log file.Is this file not the one your asking for.

[log edited out since it's the same one as above]

sking for.

[UltimateDBZ]

Nope, that's not the one I'm looking for. It's logfile that DVD2SVCD creates in your movie directory, and displays in the log tab as conversion is progressing. The filename is dvd2svcd_log.txt

Note: I'll edit your second post, so the other log isn't in here twice... no need for the page to be so long ;)

[jackflash44301]

ultimateDBZ,
OK, think this is what u ased for.By-the-way did u see the error in the log file i posted on the last line. Sounds like the image file is to big. Mabe theres a set sizes for the image file(seeing that cdrw only have so many mg). I will go over the settings mabe mest something up. Looks like to me thow in this log that the image was made without error.
P.s. will post last of dvd2vcd log because file is to larg to post all.

--------------------------------------------------------
- 9/27/2002 6:47:48 AM
- Free on drive F: 70278.30 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 10

CD image #1: CD_Image_File_CD1.bin

Executing VCDXBuild. Commandline:
"F:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose --cue-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD1.cue" --bin-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD1.bin" "F:\Documents and Settings\Administrator\Desktop\movie\image fles\VCDXBuild_Script_1.xml"
--------------------------------------------------------
- 9/27/2002 6:49:45 AM
- Free on drive F: 69471.97 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 19

CD image #2: CD_Image_File_CD2.bin

Executing VCDXBuild. Commandline:
"F:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose --cue-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD2.cue" --bin-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD2.bin" "F:\Documents and Settings\Administrator\Desktop\movie\image fles\VCDXBuild_Script_2.xml"
--------------------------------------------------------
- 9/27/2002 5:20:39 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 9/27/2002 5:20:42 PM
- Free on drive F: 69469.79 mb
- Crash Recovery
- Restarting from: SVCD Authoring
--------------------------------------------------------
- 9/27/2002 5:20:43 PM
- Free on drive F: 69469.79 mb
- Determining length of audio
--------------------------------------------------------
Analyzing: F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File00.mpg
2915.788 seconds F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File00.mpg
Analyzing: F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File01.mpg
3801.365 seconds F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File01.mpg
Analyzing finished.

--------------------------------------------------------
- 9/27/2002 5:21:56 PM
- Free on drive F: 69469.77 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 10

CD image #1: CD_Image_File_CD1.bin

Executing VCDXBuild. Commandline:
"F:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose --cue-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD1.cue" --bin-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD1.bin" "F:\Documents and Settings\Administrator\Desktop\movie\image fles\VCDXBuild_Script_1.xml"
--------------------------------------------------------
- 9/27/2002 5:23:51 PM
- Free on drive F: 69469.78 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 19

CD image #2: CD_Image_File_CD2.bin

Executing VCDXBuild. Commandline:
"F:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose --cue-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD2.cue" --bin-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD2.bin" "F:\Documents and Settings\Administrator\Desktop\movie\image fles\VCDXBuild_Script_2.xml"
VCDXBuild failed to create a bin/cue file!
--------------------------------------------------------
- 9/27/2002 5:40:30 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 9/27/2002 5:40:32 PM
- Free on drive F: 69469.77 mb
- Crash Recovery
- Restarting from: SVCD Authoring
--------------------------------------------------------
- 9/27/2002 5:40:33 PM
- Free on drive F: 69469.77 mb
- Determining length of audio
--------------------------------------------------------
Analyzing: F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File00.mpg
2915.788 seconds F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File00.mpg
Analyzing: F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File01.mpg
3801.365 seconds F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File01.mpg
Analyzing finished.

--------------------------------------------------------
- 9/27/2002 5:42:04 PM
- Free on drive F: 69469.79 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 10

CD image #1: CD_Image_File_CD1.bin

Executing VCDXBuild. Commandline:
"F:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose --cue-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD1.cue" --bin-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD1.bin" "F:\Documents and Settings\Administrator\Desktop\movie\image fles\VCDXBuild_Script_1.xml"
--------------------------------------------------------
- 9/27/2002 5:46:32 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 9/27/2002 5:47:15 PM
- Free on drive F: 68663.47 mb
- Crash Recovery
- Restarting from: SVCD Authoring
--------------------------------------------------------
- 9/27/2002 5:47:16 PM
- Free on drive F: 68663.47 mb
- Determining length of audio
--------------------------------------------------------
Analyzing: F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File00.mpg
--------------------------------------------------------
- 9/27/2002 5:48:20 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 9/27/2002 5:48:22 PM
- Free on drive F: 68663.47 mb
- Crash Recovery
- Restarting from: SVCD Authoring
--------------------------------------------------------
- 9/27/2002 5:48:23 PM
- Free on drive F: 68663.47 mb
- Determining length of audio
--------------------------------------------------------
Analyzing: F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File00.mpg
2915.788 seconds F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File00.mpg
Analyzing: F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File01.mpg
3801.365 seconds F:\Documents and Settings\Administrator\Desktop\movie\bbMPEG_Muxed_File01.mpg
Analyzing finished.

--------------------------------------------------------
- 9/27/2002 5:49:54 PM
- Free on drive F: 68663.46 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 10

CD image #1: CD_Image_File_CD1.bin

Executing VCDXBuild. Commandline:
"F:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose --cue-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD1.cue" --bin-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD1.bin" "F:\Documents and Settings\Administrator\Desktop\movie\image fles\VCDXBuild_Script_1.xml"
--------------------------------------------------------
- 9/27/2002 5:51:58 PM
- Free on drive F: 67857.14 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 19

CD image #2: CD_Image_File_CD2.bin

Executing VCDXBuild. Commandline:
"F:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose --cue-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD2.cue" --bin-file="F:\Documents and Settings\Administrator\Desktop\movie\image fles\CD_Image_File_CD2.bin" "F:\Documents and Settings\Administrator\Desktop\movie\image fles\VCDXBuild_Script_2.xml"

[Jason28]

@jackflash44301
We are going to need the whole log file. If there was an error that was made most likley it is going to be before the image files were created. Please post the whole thing. If you need to use more then 1 spot to post it go ahead.

[dvd2svcd]

My guess is that you're using tmpgenc cq to encode, try raising the offset cq value to 90 and start from scratch. But to be sure do as Jason say, post the entire log.