Ran Out of Disk Space, DVD2SVCD Won't Recover

[scorpio61]

I ran out of disk space while DVD2SVCD was converting Brave Heart. I cleaned up some space, but when I tried to use the recovery feature of DVD2SCCD, after I load the *.d2s file, I get the error "File Not Found". What file? TMPGenc completed converting the movie, and it died while creating the 2nd of 3 mpg files using bbmpeg. I would like to finish the bbmpeg process without having to render the whole movie again. Which I can't do, because although I still have the VOB files, the IFO file is missing. This is the first movie I've converted where I used DVD2SVCD to actually rip the movie, and for some reason, don't have an IFO. Is this the file it's looking for???

Here is my log, and I can post my d2s file or any other files if needed:

I'd appreciate any help. Thanks in advance!

Rob

--------------------------------------------------------
- 9/8/2002 9:34:17 AM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 3
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 9/8/2002 9:34:20 AM
- Free on drive D: 15969.09 mb
- Internal rip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- S:\VIDEO_TS\VTS_02_1.vob
- S:\VIDEO_TS\VTS_02_2.vob
- S:\VIDEO_TS\VTS_02_3.vob
- S:\VIDEO_TS\VTS_02_4.vob
- S:\VIDEO_TS\VTS_02_5.vob
- S:\VIDEO_TS\VTS_02_6.vob
- S:\VIDEO_TS\VTS_02_7.vob

Ripping: S:\VIDEO_TS\VTS_02_1.vob
Ripping: S:\VIDEO_TS\VTS_02_2.vob
Ripping: S:\VIDEO_TS\VTS_02_3.vob
Ripping: S:\VIDEO_TS\VTS_02_4.vob
Ripping: S:\VIDEO_TS\VTS_02_5.vob
Ripping: S:\VIDEO_TS\VTS_02_6.vob
Ripping: S:\VIDEO_TS\VTS_02_7.vob
Ripping finished. Speed: 1424

--------------------------------------------------------
- 9/8/2002 10:56:11 AM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[D:\EZproj\DVD2AVI_Project_file] -IF=[D:\BRAVHART\VIDEO_TS\VTS_02_1.vob,D:\BRAVHART\VIDEO_TS\VTS_02_2.vob,D:\BRAVHART\VIDEO_TS\VTS_02_3.vob,D:\BRAVHART\VIDEO_TS\VTS_02_4.vob,D:\BRAVHART\VIDEO_TS\VTS_02_5.vob,D:\BRAVHART\VIDEO_TS\VTS_02_6.vob,D:\BRAVHART\VIDEO_TS\VTS_02_7.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 9/8/2002 11:03:08 AM
- Free on drive D: 9137.45 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x81
Filename: D:\EZproj\Extracted_audio_1.ac3
Audio1 delay: 32 ms
Audio extraction finished.

--------------------------------------------------------
- 9/8/2002 11:14:28 AM
- Free on drive D: 8568.13 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: D:\EZproj\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "D:\EZproj\Extracted_audio_1.ac3" -output "D:\EZproj\Encoded_audio_1.mp2" -logfile "D:\EZproj\Encoded_audio_1.log" ) -azid( -L -3db -c normal -g max ) -ota( -d 32 ) -2lame( -e -b 224 -m s )
Audio conversion of D:\EZproj\Extracted_audio_1.ac3 finished.

Audio conversion finished.

--------------------------------------------------------
- 9/8/2002 11:58:10 AM
- Free on drive D: 8283.46 mb
- Converting Pictures
--------------------------------------------------------
Converting: C:\Program Files\DVD2SVCD\cover11.jpg
Converting: C:\Program Files\DVD2SVCD\DefaultChangeCD.bmp
Finished converting pictures
--------------------------------------------------------
- 9/8/2002 11:58:17 AM
- Free on drive D: 8282.24 mb
- Video Encoding using TMPGEnc
--------------------------------------------------------
- Encoding D:\EZproj\TitlePicture.bmp.avs
Executing TMPGEnc. Commandline:
"C:\TMPGENC257\TMPGEnc.exe" "D:\EZproj\TMPGEnc_Project_file.tpr" /Encode /Close
Video Encoding finished.

- Encoding D:\EZproj\ChangeCDPicture.bmp.avs
Executing TMPGEnc. Commandline:
"C:\TMPGENC257\TMPGEnc.exe" "D:\EZproj\TMPGEnc_Project_file.tpr" /Encode /Close
Video Encoding finished.

- Encoding D:\EZproj\AviSynth_Script_file.avs
StreamSectors: 2495536764
AudioSectors: 302947344
VideoPAPO: 33964380
ScanOffsetBytes: 230030
SeqAligningBytes: 14619691
DVDBytes: 0
VideoEndHeader: 12
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 900.00
PureMPEGStream: 2143775307.10
Seconds: 10675.20
CalcMPEGStream: 2143775307.10
Frames: 255589
CDSize: 800.00
Cut point 795.00
Aspect Ratio: 4:3 (No borders, encoded as 4:3)

---AVS Begin---
LoadPlugin("C:\PROGRA~1\DVD2SVCD\SIMPLE~1\SIMPLE~1.DLL")
LoadPlugin("C:\PROGRA~1\DVD2SVCD\MPEG2Dec\mpeg2dec.dll")
mpeg2source("D:\EZproj\DVD2AV~1.D2V")
SimpleResize(480,480)
----AVS End----

Executing TMPGEnc. Commandline:
"C:\TMPGENC257\TMPGEnc.exe" "D:\EZproj\TMPGEnc_Project_file.tpr" /Encode /Close
Video Encoding finished.

--------------------------------------------------------
- 9/9/2002 4:29:52 PM
- Free on drive D: 3661.26 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\EZproj\TitlePicture.bmp.mpg"
--------------------------------------------------------
- 9/9/2002 4:29:58 PM
- Free on drive D: 3661.23 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\EZproj\ChangeCDPicture.bmp.mpg"
--------------------------------------------------------
- 9/9/2002 4:30:01 PM
- Free on drive D: 3661.20 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 795 mb

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\EZproj\bbMPEG_Muxed_File.mpg"
Length of D:\EZproj\bbMPEG_Muxed_File00.mpg
3644 Seconds
Offset in Seconds: 3646
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 795 mb

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\EZproj\bbMPEG_Muxed_File.mpg"
Length of D:\EZproj\bbMPEG_Muxed_File01.mpg
3430 Seconds
Offset in Seconds: 7076
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 795 mb

Executing RunbbMPEG. Commandline:
"C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\EZproj\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.

--------------------------------------------------------
- 9/9/2002 6:42:28 PM
- Free on drive D: 1276.94 mb
- Determining length of audio
--------------------------------------------------------
Analyzing: D:\EZproj\bbMPEG_Muxed_File00.mpg
3649.248 seconds D:\EZproj\bbMPEG_Muxed_File00.mpg
Analyzing: D:\EZproj\bbMPEG_Muxed_File01.mpg
3435.312 seconds D:\EZproj\bbMPEG_Muxed_File01.mpg
Analyzing: D:\EZproj\bbMPEG_Muxed_File02.mpg
3583.896 seconds D:\EZproj\bbMPEG_Muxed_File02.mpg
Analyzing finished.

--------------------------------------------------------
- 9/9/2002 6:45:25 PM
- Free on drive D: 1276.93 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 8

CD image #1: CD_Image_File_CD1.bin

Executing VCDXBuild. Commandline:
"C:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose --cue-file="D:\EZproj\CD_Image_File_CD1.cue" --bin-file="D:\EZproj\CD_Image_File_CD1.bin" "D:\EZproj\VCDXBuild_Script_1.xml"
--------------------------------------------------------
- 9/9/2002 6:51:29 PM
- Free on drive D: 470.77 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 7

CD image #2: CD_Image_File_CD2.bin

Executing VCDXBuild. Commandline:
"C:\Program Files\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose --cue-file="D:\EZproj\CD_Image_File_CD2.cue" --bin-file="D:\EZproj\CD_Image_File_CD2.bin" "D:\EZproj\VCDXBuild_Script_2.xml"

[UltimateDBZ]

I don't know if a missing IFO would cause this or not, but you can find out easily enough by using the 'Create New IFO' feature of IFOEdit, since you still have all the VOBs.

[Jason28]

The reason why you are getting that error is because the .ifo file is missing. When you try to use the crash recover methoed it looks for the .ifo file and if you moved or deleted it then it wont work correctly. But like UltimateDBZ said you can recreate the .ifo with IFOEdit.

[hoozdapimp]

i don't understand...what files do you have in your directory...from your log you should be able to finish the encoding out manually pretty easily

[Labersack]

The best would be to copy ANY ifo of the same filename to your source-directory. If you just recover from muxing&cutting, the ifo won't be used any more, it's only checked at the start to be there.

[angel_bleu]

habe the same problem. Where is usualy located that info file and whatis it's name?. I need to make my dvd2svcd restart from multiplexin and cutting and i cant find ditaled information on forums... i'm a newbbe