File error after joining with MKVToolnix

[raulpuro]

Hi,

I have joined the file part1 + part2 with MKVToolnix, although the file is created it shows the error:

"The codec's private data does not match. Both have the same length (2408) but different content. Please make sure that the resulting file plays correctly the whole time. The author of this program will probably not give support for playback issues with the resulting file. "

If play the video for a few seconds everything is fine, but if I go back in the player, the file is corrupt.

These are the files:

https://mega.nz/file/NdhzUYQY#-BgemfNXKAl8AagiKMO8jb3oEOXr83MGLsssrOs4tZI

These are a demonstration video

https://mega.nz/file/VMR0yA4R#Gzh8UG33PJhWgY1BBu_d_tRxxoT_ZUxXqKA5derjVAI

Greetings and thanks.

[sneaker_ger]

The problem is that you got different headers because the x265 version and/or settings differed between both encodes. So you either have to:
a.) use x265 with compatible settings/version or
b.) use a workaround where the header data is placed at every keyframe ("in-band")

For b.):
This is already done for parte2.mkv. It is not done for parte1.mkv (HandBrake does not do it). You could encode parte1.mkv with a different software (e.g. "manually" with x265cli with hevc output).

[raulpuro]

Hi,

Thanks for your answer, I understand, the problem is that I have no knowledge of encoding / rendering, part2 is not encoded / rendered by me, for part1 I used HandBrake because visually it is simple.

Would it be too much to ask, that you explain the application and the parameters that I must use to be able to join part1 correctly?

Regards

[RanmaCanada]

Hi,

Thanks for your answer, I understand, the problem is that I have no knowledge of encoding / rendering, part2 is not encoded / rendered by me, for part1 I used HandBrake because visually it is simple.

Would it be too much to ask, that you explain the application and the parameters that I must use to be able to join part1 correctly?

Regards
You have to encode both with the exact same settings/parameters. Encode part 2 with the same profile you used for part 1. That should resolve it.

[raulpuro]

You have to encode both with the exact same settings/parameters. Encode part 2 with the same profile you used for part 1. That should resolve it.

Hi,

The problem, as I was commenting, is my lack of knowledge to encode, no application to use, how to set the parameters...

From what I've seen these are the data of parte2.mkv


General
Format: Matroska
File Size: 126 MiB
Duration: 6 min 46 s
Overall Bit Rate: 2 598 kb/s

Video
Format: HEVC
Bit Rate: 2 242 kb/s
Dimensions: 1440 pixels x 1080 pixels
Display Aspect Ratio: 4:3
Frame Rate: 23.976 (24000/1001) FPS
Writing library: x265 3.1+20-913823aa15cd:[Windows][GCC 9.2.0][64 bit] 10bit
Encoding settings: cpuid=1111039 / frame-threads=3 / numa-pools=8 / wpp / no-pmode / no-pme / no-psnr / no-ssim / log-level=2 / input-csp=1 / input-res=1440x1080 / interlace=0 / total-frames=0 / level-idc=0 / high-tier=1 / uhd-bd=0 / ref=4 / no-allow-non-conformance / no-repeat-headers / annexb / no-aud / no-hrd / info / hash=0 / no-temporal-layers / open-gop / min-keyint=23 / keyint=250 / gop-lookahead=0 / bframes=4 / b-adapt=2 / b-pyramid / bframe-bias=0 / rc-lookahead=25 / lookahead-slices=4 / scenecut=40 / radl=0 / no-splice / no-intra-refresh / ctu=64 / min-cu-size=8 / rect / no-amp / max-tu-size=32 / tu-inter-depth=1 / tu-intra-depth=1 / limit-tu=0 / rdoq-level=2 / dynamic-rd=0.00 / no-ssim-rd / signhide / no-tskip / nr-intra=0 / nr-inter=0 / no-constrained-intra / strong-intra-smoothing / max-merge=3 / limit-refs=3 / limit-modes / me=3 / subme=3 / merange=57 / temporal-mvp / no-hme / weightp / no-weightb / no-analyze-src-pics / deblock=0:0 / no-sao / no-sao-non-deblock / rd=4 / selective-sao=0 / no-early-skip / rskip / no-fast-intra / no-tskip-fast / no-cu-lossless / no-b-intra / no-splitrd-skip / rdpenalty=0 / psy-rd=2.00 / psy-rdoq=1.00 / no-rd-refine / no-lossless / cbqpoffs=0 / crqpoffs=0 / rc=abr / bitrate=2250 / qcomp=0.60 / qpstep=4 / stats-write=0 / stats-read=2 / cplxblur=20.0 / qblur=0.5 / ipratio=1.40 / pbratio=1.30 / aq-mode=3 / aq-strength=1.00 / cutree / zone-count=0 / no-strict-cbr / qg-size=32 / no-rc-grain / qpmax=69 / qpmin=0 / no-const-vbv / sar=1 / overscan=0 / videoformat=5 / range=0 / colorprim=2 / transfer=2 / colormatrix=2 / chromaloc=0 / display-window=0 / cll=0,0 / min-luma=0 / max-luma=1023 / log2-max-poc-lsb=8 / vui-timing-info / vui-hrd-info / slices=1 / no-opt-qp-pps / no-opt-ref-list-length-pps / multi-pass-opt-rps / scenecut-bias=0.05 / no-opt-cu-delta-qp / aq-motion / no-hdr / no-hdr-opt / no-dhdr10-opt / no-idr-recovery-sei / analysis-reuse-level=5 / scale-factor=0 / refine-intra=0 / refine-inter=0 / refine-mv=1 / refine-ctu-distortion=0 / no-limit-sao / ctu-info=0 / no-lowpass-dct / refine-analysis-type=0 / copy-pic=1 / max-ausize-factor=1.0 / no-dynamic-refine / no-single-sei / no-hevc-aq / no-svt / no-field / qp-adaptation-range=1.00

But as I comment I don't know how to use them.

Regards and sorry for the inconvenience..

[MeteorRain]

part2 is not encoded / rendered by me

You can't just join 2 clips like that. There are strict rules on whether clips can be joined, and a random clip has a minimal chance to meet that rule.

Your safest bet is to encode both part as whole into one file.