Revgen
29th January 2018, 03:48
How to transfer the English DTS-HD Master Audio track from the Dutch Son of Bigfoot 2-D blu-ray and combine it with the Dutch 3-D blu-ray.
Those who have the Dutch Son of Bigfoot 2-D/3-D blu-ray combo pack and want to watch the film in 3-D and with English audio are in a bind. Only the 2-D disc has the English audio track. The 3-D disc only has Dutch and French audio. But thanks to software like tsMuxer, this problem can be solved.
This will create a movie-only 3-D disc with no menus.
1) Software requirements
a) A Blu-Ray decrypter that can create a 3-D Blu-Ray .iso file. I use AnyDVD. DVDFab is another option.
b) Elaborate Bytes Virtual CloneDrive. This is a virtual drive software that allows you to mount your .iso file and read it like you were inserting a disc into your blu-ray drive. https://www.elby.ch/en/products/vcd.html
c) tsMuxer. This is the main software for performing the task. It will create a movie-only no-menu 3-D blu-ray ISO. https://www.videohelp.com/software/tsMuxeR
d) Burning software that supports BD-R discs. I use IMGBurn. It's freeware. http://www.imgburn.com/
2) Hardware Requirements
a) Make sure you have plenty of HDD space. At least 100gb.
b) A BD-R burner.
c) Single-layer 25gb BD-R disc.
3) Rip both your 3-D and 2-D disc to your HDD with your decryption software. Rip your 2-D disc to a folder. Rip your 3-D disc to an .iso file.
4) Mount your 3-D .iso file with Virtual Clone Drive. It will create a new "drive" that you can browse.
5) Open tsMuxerGUI.exe in your tsMuxer folder. In the far upper right corner, click "add" and select your newly created virtual drive for your 3-D blu-ray .iso file. Go to and select the BDMV\STREAM\SSIF\00000.ssif file and open it.
http://img196.imagevenue.com/loc455/th_94118_bigfoot1_122_455lo.jpg (http://img196.imagevenue.com/img.php?image=94118_bigfoot1_122_455lo.jpg)
6) Leave the MVC and H.264 codec's checked. Uncheck DTS audio for the French and Dutch audio tracks. Uncheck the Dutch and French subtitles.
http://img162.imagevenue.com/loc115/th_93606_bigfoot2_122_115lo.jpg (http://img162.imagevenue.com/img.php?image=93606_bigfoot2_122_115lo.jpg)
7) Click "add" again and go to your 2-D blu-ray folder. Select the BDMV\PLAYLIST\00000.mpls file and open it.
http://img251.imagevenue.com/loc450/th_93607_bigfoot3_122_450lo.jpg (http://img251.imagevenue.com/img.php?image=93607_bigfoot3_122_450lo.jpg)
8) This will add additional video, audio, and subtitle streams. Uncheck all of these streams except for the "DTS-HD" English audio track.
http://img12.imagevenue.com/loc248/th_93608_bigfoot4_122_248lo.jpg (http://img12.imagevenue.com/img.php?image=93608_bigfoot4_122_248lo.jpg)
9) Highlight the English DTS-HD Master Audio stream. Below the tracklist is a field called "General Track Options". Within this field is a setting called "Delay (in ms)". Change the number of the delay from 167 to 117.
http://img292.imagevenue.com/loc335/th_93612_bigfoot5_122_335lo.jpg (http://img292.imagevenue.com/img.php?image=93612_bigfoot5_122_335lo.jpg)
10) At the bottom of the GUI is the Output section. Choose "Blu-ray ISO" as your output option. Choose your "Disk label" and your filename.
http://img172.imagevenue.com/loc567/th_93614_bigfoot6_122_567lo.jpg (http://img172.imagevenue.com/img.php?image=93614_bigfoot6_122_567lo.jpg)
11) Click the "Start muxing" button at the bottom of the GUI. It will create a movie-only 3-D Blu-ray .iso file that you can burn with burning software. It will fit onto a single-layer 25gb BD-R disc.
12) Burn your .iso file with your burning software.
Those who have the Dutch Son of Bigfoot 2-D/3-D blu-ray combo pack and want to watch the film in 3-D and with English audio are in a bind. Only the 2-D disc has the English audio track. The 3-D disc only has Dutch and French audio. But thanks to software like tsMuxer, this problem can be solved.
This will create a movie-only 3-D disc with no menus.
1) Software requirements
a) A Blu-Ray decrypter that can create a 3-D Blu-Ray .iso file. I use AnyDVD. DVDFab is another option.
b) Elaborate Bytes Virtual CloneDrive. This is a virtual drive software that allows you to mount your .iso file and read it like you were inserting a disc into your blu-ray drive. https://www.elby.ch/en/products/vcd.html
c) tsMuxer. This is the main software for performing the task. It will create a movie-only no-menu 3-D blu-ray ISO. https://www.videohelp.com/software/tsMuxeR
d) Burning software that supports BD-R discs. I use IMGBurn. It's freeware. http://www.imgburn.com/
2) Hardware Requirements
a) Make sure you have plenty of HDD space. At least 100gb.
b) A BD-R burner.
c) Single-layer 25gb BD-R disc.
3) Rip both your 3-D and 2-D disc to your HDD with your decryption software. Rip your 2-D disc to a folder. Rip your 3-D disc to an .iso file.
4) Mount your 3-D .iso file with Virtual Clone Drive. It will create a new "drive" that you can browse.
5) Open tsMuxerGUI.exe in your tsMuxer folder. In the far upper right corner, click "add" and select your newly created virtual drive for your 3-D blu-ray .iso file. Go to and select the BDMV\STREAM\SSIF\00000.ssif file and open it.
http://img196.imagevenue.com/loc455/th_94118_bigfoot1_122_455lo.jpg (http://img196.imagevenue.com/img.php?image=94118_bigfoot1_122_455lo.jpg)
6) Leave the MVC and H.264 codec's checked. Uncheck DTS audio for the French and Dutch audio tracks. Uncheck the Dutch and French subtitles.
http://img162.imagevenue.com/loc115/th_93606_bigfoot2_122_115lo.jpg (http://img162.imagevenue.com/img.php?image=93606_bigfoot2_122_115lo.jpg)
7) Click "add" again and go to your 2-D blu-ray folder. Select the BDMV\PLAYLIST\00000.mpls file and open it.
http://img251.imagevenue.com/loc450/th_93607_bigfoot3_122_450lo.jpg (http://img251.imagevenue.com/img.php?image=93607_bigfoot3_122_450lo.jpg)
8) This will add additional video, audio, and subtitle streams. Uncheck all of these streams except for the "DTS-HD" English audio track.
http://img12.imagevenue.com/loc248/th_93608_bigfoot4_122_248lo.jpg (http://img12.imagevenue.com/img.php?image=93608_bigfoot4_122_248lo.jpg)
9) Highlight the English DTS-HD Master Audio stream. Below the tracklist is a field called "General Track Options". Within this field is a setting called "Delay (in ms)". Change the number of the delay from 167 to 117.
http://img292.imagevenue.com/loc335/th_93612_bigfoot5_122_335lo.jpg (http://img292.imagevenue.com/img.php?image=93612_bigfoot5_122_335lo.jpg)
10) At the bottom of the GUI is the Output section. Choose "Blu-ray ISO" as your output option. Choose your "Disk label" and your filename.
http://img172.imagevenue.com/loc567/th_93614_bigfoot6_122_567lo.jpg (http://img172.imagevenue.com/img.php?image=93614_bigfoot6_122_567lo.jpg)
11) Click the "Start muxing" button at the bottom of the GUI. It will create a movie-only 3-D Blu-ray .iso file that you can burn with burning software. It will fit onto a single-layer 25gb BD-R disc.
12) Burn your .iso file with your burning software.