Unable to Demux DVB-T using Projectx

[Gentletouch]

I am new to video editing and especially using ProjectX. I have recorded a 10 minute cartoon on my new Humax HDR-Fox T2 recorder. It creates .TS file which plays fine on windows. I want to create an mpeg4 file but get big audio synch problems with DivX. When using projectX to demux I get a huge number of errors and no audio/video files are written. I have tried loads of settings, can anyone say from the log what I am doing wrong?

Regards



Sunday, 10 April 2011 18:21:14 o'clock BST
ProjectX 0.90.4.00 (30.03.2006)

-> working with collection 0

-> save normal log file
-> write all video data
-> patch c.d.flagged infos of pictures
-> add sequence end code
-> set resolution in SDE
-> PVA: strictly specs. for audio streams
-> VOB: determine diff. Cell timelines
-> TS: ignore scrambled packets
-> TS: enhanced search for open packets
-> TS: join file segments (of Dreambox®)
-> TS: Humax® file format adaption
-> TS: generate PMT stream dependent
-> get only enclosed PES/TS packets
-> concatenate different recordings
-> ensure 1st PES-packet start with video
-> generate PCR/SCR from PTS

-> write output files to: 'H:\'

-> Input File 0: 'H:\OCTONAUT.TS' (309,129,216 bytes)
-> Filetype is PES (incl. MPEG Video)
-> demux
!> missing startcode @ 0
!> found startcode @ 24008
-> found PES-ID 0xE0 (MPEG Video) @ 24008
!> missing next startcode @ 42264 from 38410 (PES-ID 0xC0), dropping packet..
!> found startcode @ 49160
!> missing next startcode @ 103512 from 99658 (PES-ID 0xC0), dropping packet..
!> found startcode @ 101576
!> missing next startcode @ 166296 from 162442 (PES-ID 0xC0), dropping packet..
!> found startcode @ 177416
!> missing next startcode @ 227160 from 223306 (PES-ID 0xC0), dropping packet..
!> found startcode @ 263816
!> missing next startcode @ 289752 from 285898 (PES-ID 0xC0), dropping packet..
!> found startcode @ 312008
!> missing next startcode @ 350424 from 346570 (PES-ID 0xC0), dropping packet..
!> found startcode @ 360968
!> missing next startcode @ 410136 from 406282 (PES-ID 0xC0), dropping packet..
!> found startcode @ 409928
!> dropping GOP# 0 @ orig.PTS 11:13:37.122 (3637541045), errorcode: 24
!> Pics exp/cnt 409/13, inGOP PTS diff. 0ms, new Timecode 00:00:00.000
!> missing next startcode @ 467352 from 463498 (PES-ID 0xC0), dropping packet..
!> found startcode @ 501128
!> missing next startcode @ 526104 from 522250 (PES-ID 0xC0), dropping packet..
!> found startcode @ 525320
!> missing next startcode @ 588120 from 584266 (PES-ID 0xC0), dropping packet..
!> found startcode @ 606728
!> missing next startcode @ 652056 from 648202 (PES-ID 0xC0), dropping packet..
!> found startcode @ 657800
!> wrong frametype 0, tref 2
!> wrong frametype 0, tref 2
!> wrong frametype 0, tref 2
!> dropping GOP# 1 @ orig.PTS 11:13:37.602 (3637584245), errorcode: 21
!> Pics exp/cnt 409/19, inGOP PTS diff. 0ms, new Timecode 00:00:00.000
!> missing next startcode @ 715800 from 711946 (PES-ID 0xC0), dropping packet..
!> found startcode @ 758792
!> missing next startcode @ 780312 from 776458 (PES-ID 0xC0), dropping packet..
!> found startcode @ 782024
!> missing next startcode @ 846360 from 842506 (PES-ID 0xC0), dropping packet..
!> found startcode @ 843656
!> missing next startcode @ 909336 from 905482 (PES-ID 0xC0), dropping packet..
!> found startcode @ 929480
!> wrong frametype 0, tref 0
!> wrong frametype 0, tref 2
!> wrong frametype 0, tref 2
!> wrong frametype 0, tref 0


etc. etc. etc.

!> missing next startcode @ 6272664 from 6268810 (PES-ID 0xC0), dropping packet..
!> found startcode @ 6272456
!> missing next startcode @ 6334680 from 6330826 (PES-ID 0xC0), dropping packet..
!> found startcode @ 6332176
!> wrong frametype 0, tref 0
!> wrong frametype 0, tref 0
!> wrong frametype 0, tref 0
!> wrong frametype 0, tref 0
!> wrong frametype 0, tref 4
!> wrong frametype 0, tref 0
!> wrong frametype 0, tref 0
!> wrong frametype 0, tref 0
!> wrong frametype 0, tref 0
!> wrong frametype 0, tref 0
!> wrong frametype 0, tref 0
!> wrong frametype 0, tref 2
!> dropping GOP# 24 @ orig.PTS 11:13:48.642 (3638577845), errorcode: 21
!> Pics exp/cnt 409/31, inGOP PTS diff. 0ms, new Timecode 00:00:00.000
!> missing next startcode @ 6432396 from 6386686 (PES-ID 0xC8), dropping packet..
!> found startcode @ 6396490
-> more than 500 warnings/errors, stop logging..
-> video basics: 720*576 @ 25fps @ 0.7031 (16:9) @ 15000000bps, vbvBuffer 112
-> starting export of video data @ GOP# 185
-> skip sequence_end_code following GOP# 214
GOP# 345, new format in next leading sequenceheader detected: (00:00:00.400)
-> video basics: 2820*3989 @ 23.976fps @ 0.9815 @ 21002400bps, vbvBuffer 813
GOP# 346, new format in next leading sequenceheader detected: (00:00:00.417)
-> video basics: 720*576 @ 25fps @ 0.7031 (16:9) @ 15000000bps, vbvBuffer 112
-> found PES-ID 0xEA (MPEG Video)-> ignored @ 170326888
-> found PES-ID 0xE1 (MPEG Video)-> ignored @ 178145234
-> skip sequence_end_code following GOP# 1168

-> Video: fr/ ct/ 1p/ cg/ og/ dg -> 10/ 1439/ 1/ 1/ 0/ 1442
-> Video length: 10 frames @ 00:00:00.400
-> GOP summary: min. 20, max. 20 fields; contains interlaced frames
-> avg. nom. bitrate 795800bps (min/max: 795200/795200)
-> set first sequenceheader bitrate to 795200bps
---> new File: H:\\OCTONAUT.m2v

summary of created media files:
.Video (m2v): 10 Frames 00:00:00.400 'H:\\OCTONAUT.m2v'
=> 39,790 bytes written...
-> we have 34983 warnings/errors.

[Gentletouch]

Figured it out, with the help of a little research. My Humax machine records and saves its files in an m2ts container (Used on blueray disks) but saves the file with a .ts extension. I used a utility called m2tstots to convert the recording to a ts container. Now Projectx works fine.

[Ghitulescu]

Indeed Humax uses a .M2TS container to store the recordings. As indicated for your receiver -> http://foxsat-hdr.wikispaces.com/Editing+SD+recordings
tsremux could also be of great help here, or ts doctor, the latter also cleans the recordings.

[StainlessS]

@GentleTouch

New version ProjectX update 27 Mar 2011, v0.91.0
Includes pre-complied jar file.
You will need runtime Java installed.
see here:-

http://sourceforge.net/projects/project-x/

EDIT: Changed bad link.