latet
7th March 2011, 23:45
Hi,
Sony DVD Architect Pro 5 crashes on importing .m2ts files. Not all, but most of the ones I tried, and I can't figure out what causes it. Any ideas?
BTW: Sony Vegas Pro 9.0 also crashes on importing the very same m2ts files.
This is the info log of one of such files:
ID : 1 (0x1)
Complete name : F:\test.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 506 MiB
Duration : 4mn 40s
Overall bit rate : 15.2 Mbps
Maximum Overall bit rate : 35.5 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 5 frames
Format settings, GOP : M=4, N=50
Codec ID : 27
Duration : 4mn 40s
Bit rate mode : Variable
Bit rate : 14.0 Mbps
Maximum bit rate : 40.0 Mbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 50.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.304
Stream size : 471 MiB (93%)
Writing library : x264 core 112 r1867 22bfd31
Encoding settings : cabac=1 / ref=6 / deblock=1:-1:-1 / analyse=0x3:0x113 / me=hex / subme=7
/ psy=1 / psy_rd=1.00:0.15 / mixed_ref=1 / me_range=16
/ chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-3
/ threads=3 / sliced_threads=0 / slices=4 / nr=0 / decimate=1
/ interlaced=0 / constrained_intra=0 / bframes=3 / b_pyramid=1 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0
/ weightp=1 / keyint=50 / keyint_min=5 / scenecut=40
/ intra_refresh=0 / rc_lookahead=40 / rc=2pass / mbtree=1
/ bitrate=14000 / ratetol=1.0 / qcomp=0.60 / qpmin=0
/ qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5
/ vbv_maxrate=40000 / vbv_bufsize=30000 / nal_hrd=vbr
/ ip_ratio=1.40 / aq=1:1.00
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 129
Duration : 4mn 40s
Bit rate mode : Constant
Bit rate : 448 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 15.0 MiB (3%)
Thanks,
latet
Sony DVD Architect Pro 5 crashes on importing .m2ts files. Not all, but most of the ones I tried, and I can't figure out what causes it. Any ideas?
BTW: Sony Vegas Pro 9.0 also crashes on importing the very same m2ts files.
This is the info log of one of such files:
ID : 1 (0x1)
Complete name : F:\test.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 506 MiB
Duration : 4mn 40s
Overall bit rate : 15.2 Mbps
Maximum Overall bit rate : 35.5 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings, CABAC : Yes
Format settings, ReFrames : 5 frames
Format settings, GOP : M=4, N=50
Codec ID : 27
Duration : 4mn 40s
Bit rate mode : Variable
Bit rate : 14.0 Mbps
Maximum bit rate : 40.0 Mbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 50.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.304
Stream size : 471 MiB (93%)
Writing library : x264 core 112 r1867 22bfd31
Encoding settings : cabac=1 / ref=6 / deblock=1:-1:-1 / analyse=0x3:0x113 / me=hex / subme=7
/ psy=1 / psy_rd=1.00:0.15 / mixed_ref=1 / me_range=16
/ chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-3
/ threads=3 / sliced_threads=0 / slices=4 / nr=0 / decimate=1
/ interlaced=0 / constrained_intra=0 / bframes=3 / b_pyramid=1 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0
/ weightp=1 / keyint=50 / keyint_min=5 / scenecut=40
/ intra_refresh=0 / rc_lookahead=40 / rc=2pass / mbtree=1
/ bitrate=14000 / ratetol=1.0 / qcomp=0.60 / qpmin=0
/ qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5
/ vbv_maxrate=40000 / vbv_bufsize=30000 / nal_hrd=vbr
/ ip_ratio=1.40 / aq=1:1.00
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 129
Duration : 4mn 40s
Bit rate mode : Constant
Bit rate : 448 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 15.0 MiB (3%)
Thanks,
latet