MeGUI x64

[Carpo]

Why discontinue it? The world is going 64bit - but it is your choice to stop development on it if you wish :)

[Zathor]

Why discontinue it? The world is going 64bit - but it is your choice to stop development on it if you wish :)

Because AviSynth x64 is discontinued as well. At least I do not see any progress in this area.

[Carpo]

Well I suppose you can only develop for what is out there and supported

[Wam7]

Obviously I can't speak for everybody but I don't see the point in developing it any further. It is only marginally faster than x86, besides which you can enable 64 bit mode for x264 in x86 MeGUI. There have been some excellent advancements on MeGUI in the past few months so it is best to focus on just x86.

[Carpo]

I wouldn't call 20fps more marginally faster, Just did an encode - with x86 megui i get about 26fps on 1080p encode, using x64 megui and x64 avisynth i was getting about 44-46fps, but it is up to the devs to support what they want, and if avisynth x64 is not being developed then there is no reason to support it

[sneaker_ger]

with x86 megui i get about 26fps on 1080p encode, using x64 megui and x64 avisynth i was getting about 44-46fps

Then you must have been doing something very differently. x64 does not explain such a huge speed-up.

[Carpo]

same files, same drive, same settings

[JoeH]

Personally I think you can discontinue it. It looks to me like if there is a secondary "future" version of MeGUI like this in development it should be a VapourSynth compatible MeGUI.

[Carpo]

indeed, just make the x86 version better than it already is :)

[sneaker_ger]

same files, same drive, same settings

Something has to be different, you just have to look closer.

[Kurtnoise]

It looks to me like if there is a secondary "future" version of MeGUI like this in development it should be a VapourSynth compatible MeGUI.
This implies to rewrite it from scratch coz MeGUI is heavily dependent of Avisynth...

[Groucho2004]

This implies to rewrite it from scratch coz MeGUI is hardly dependent of Avisynth...
What???

I iz confuzed coz I thinks megui heavily depends on Avisynth. :confused:

[Kurtnoise]

yeah, sorry..wrong word.

[Carpo]

Something has to be different, you just have to look closer.

going to do a fresh install soon, then do some more tests, maybe with all the different files floating about something is causing it, fresh system might be a good bet :)

[ZenMystic]

I came accross this post I use megui 64 a fair bit... am I now going to have to switch to 32 bit? I also use FFDShow 64 and MPC-HC 64 A LOT to play my videos I encode... Am I going to have to put all to 32 bit to get it all to work together? Just asking...

[Kurtnoise]

You can stick with 64 bits for playback...but switch to 32 bits tools for transcoding files (avisynth + decoders).

[Poutnik]

.....and if avisynth x64 is not being developed then there is no reason to support it

Is AVS64 drop confirmed by AVS developers ?

[Poutnik]

You can stick with 64 bits for playback...but switch to 32 bits tools for transcoding files (avisynth + decoders).

Some may use AVS based FFDShow 64b postprocessing....
Personally i did so in 32b only, even if I have x64,
but some users moved farther to AVS64 then me....

[Carpo]

I just went by what Zathor said, hence the IF part of the sentence,

Because AviSynth x64 is discontinued as well. At least I do not see any progress in this area.

and seeing as SEt said over in the Avisynth Development thread -

x64 support for 2.6 is unlikely.

It looks like we will have to wait for x64 Avisynth

[paradoxical]

I came accross this post I use megui 64 a fair bit... am I now going to have to switch to 32 bit? I also use FFDShow 64 and MPC-HC 64 A LOT to play my videos I encode... Am I going to have to put all to 32 bit to get it all to work together? Just asking...

No, why would you? The encoded files are exactly the same regardless of whether the encoder was 32 or 64 bits.

[Zathor]

No, why would you? The encoded files are exactly the same regardless of whether the encoder was 32 or 64 bits.
And even the encoder is 64bit as x264 x64 is used with MeGUI x86 on a x64 system.

[ghstkhp]

hello.
does anyone know where can these dlls(64 bit) be found: convolution3dyv12, tomsmocomp, dgavcdec.
thanks

[Guest]

There is no 64-bit dgavcdec. Anyway, there is no license for you to use it and anyone giving it to you is violating my copyright.

[Kurtnoise]

these plugins don't exist in 64bits...so, drop Avisynth_x64 for the moment.

[ghstkhp]

There is no 64-bit dgavcdec. Anyway, there is no license for you to use it and anyone giving it to you is violating my copyright.
ok thanks

these plugins don't exist in 64bits...so, drop Avisynth_x64 for the moment.

ok thanks

[pommesmatte]

Well I'm stuck with MeGUI x64 2237, because the newer x86 versions are simply not working for me
Index with DGindexnv -> not working
AVS create from a manually created *.dgi -> crash
Preview of a manually created *.avs -> crash
Encode of the *.avs without preview -> crash

2237 x64 is running for years without problems, let alone the fact, that HD Stream Extractor cannot handle 3D Blurays.

[Zathor]

Post your problems with more details (e.g. logs) please in the other MeGUI thread so that we may see what the problem is.

Nevertheless if you want a more recent x64 build:
EDIT: See below
I have only compiled it - not tested at all. Also you have to find/copy the required updated packages manually.

[tormento]

Post your problems with more details (e.g. logs) please in the other MeGUI thread so that we may see what the problem is.

Nevertheless if you want a more recent x64 build:
http://www.mediafire.com/download/53ap24nsbs8rkw3/MeGUI_x64.zip
I have only compiled it - not tested at all. Also you have to find/copy the required updated packages manually.

Does not even start :p

[Zathor]

Does not even start :p

Indeed :eek:
Fixed: MeGUI x64 (http://www.mediafire.com/download/3px77iu3w8maurv/MeGUI_x64.zip)

[rack04]

Indeed :eek:
Fixed: MeGUI x64 (http://www.mediafire.com/download/3px77iu3w8maurv/MeGUI_x64.zip)

Still doesn't start.

Exception message: Could not load file or assembly 'SevenZipSharp, Version=0.64.3890.29348, Culture=neutral, PublicKeyToken=20de82c62b055c88' or one of its dependencies. The system cannot find the file specified.

[tormento]

Still doesn't start.

Exception message: Could not load file or assembly 'SevenZipSharp, Version=0.64.3890.29348, Culture=neutral, PublicKeyToken=20de82c62b055c88' or one of its dependencies. The system cannot find the file specified.

Confirmed. Even tried to replace the library with more recent ones.

[Zathor]

It works for me - at least I can start it. Here is a download of my DLL files:
MeGUI x64 + DLLs (http://www.mediafire.com/download/c6ee8wj589zqia4/MeGUI_x64.zip)

[tormento]

It works for me - at least I can start it. Here is a download of my DLL files:
MeGUI x64 + DLLs (http://www.mediafire.com/download/c6ee8wj589zqia4/MeGUI_x64.zip)

It starts when exe replaced with newer.

The issue now is it keeps on wanting to install AVS 2.5.8 portable.

[Zathor]

This is expected as I have only updated the core program. the files on the update server have not been changed and I do not plan to do so atm. Update the files yourself e.g. from AviSynth+ x64. Also several filters cannot be found.

[Xebika]

What do MeGUI Libraries because it's do the as Avisynth Portable??

[Zathor]

Sorry, I do not get your question.

[Xebika]

http://cloudho.st/i/BXRrkzcF.jpg

MeGUI Libraries show up in the updater again and again like Avisynth Portable.

So I wanted to know what MeGUI Libraries used to.

[brunosso]

http://cloudho.st/i/eK8F5edF.jpg

I use a lot the option in x86 versione of Megui, to select a language, if it cannot be determined.
In the x64 release this option dont exist! Is possible to reintegrate?

[Zathor]

Which version do you use?

[Zathor]

I have updated the version on the server and in the first post to 2611. Most of the used packages have not been updated. Also you will get a message during startup that components are missing. This is because not all filters are availble in 64bit versions.

[brunosso]

Which version do you use?

http://forum.doom9.org/showpost.php?p=1743347&postcount=332

this version... now i try the last you upload!

Thanks

PS: I try to update some tools, but i have extract error!

http://pastebin.com/uMnYrneZ

i run megui as admin..

PS2: I manually download all packages from server, and extract all in the relative folder "tools".. now i try some encode...

[luke83]

[Error] Log
-[Information] Versions
--[Information] [10/12/2015 14:45:11] MeGUI Version : 2611 x64
--[Information] [10/12/2015 14:45:11] Operating System: Windows 8.1 Professional Edition x64 (6.3.0.9600)
--[Information] [10/12/2015 14:45:11] .NET Framework: 4.0 (4.0.0.0)
--[Information] [10/12/2015 14:45:11] .NET Framework: 4.5.2 (4.5.51650)
--[Information] [10/12/2015 14:45:11] AviSynth+: 2.6.0.5 (03-01-2014)
--[Information] [10/12/2015 14:45:11] AvisynthWrapper: (10-04-2010)
--[Information] [10/12/2015 14:45:11] Haali Matroska Splitter: 1.13.138.14 (14-04-2013)
--[Information] [10/12/2015 14:45:11] Haali DSS2: (14-04-2013)
--[Information] [10/12/2015 14:45:11] ICSharpCode.SharpZipLib: 0.85.5.452 (07-08-2008)
--[Information] [10/12/2015 14:45:11] MediaInfo: 0.7.61.0 (21-10-2012)
--[Information] [10/12/2015 14:45:11] MediaInfoWrapper: 0.7.61.0 (06-01-2013)
--[Information] [10/12/2015 14:45:11] MessageBoxExLib: 1.0.2218.28317 (19-12-2008)
--[Information] [10/12/2015 14:45:11] SevenZipSharp: 0.64.3890.29348 (02-01-2011)
--[Information] [10/12/2015 14:45:11] 7z: 9.20 (18-11-2010)
-[Error] Update detection
--[Information] [10/12/2015 14:45:11] Automatic update is disabled
--[Information] [10/12/2015 14:45:11] Using cached update config and server: http://megui.org/auto/
--[Information] [10/12/2015 14:45:11] There is 1 package which can be updated: AviSynth plugins
--[Information] [10/12/2015 14:45:15] There is 1 package which can be updated: AviSynth plugins
--[Information] [10/12/2015 14:45:18] 1/1 - updating package AviSynth plugins
--[Error] [10/12/2015 14:45:19] Old version of AviSynth plugins could not be accessed correctly. Check if it is in use. Accesso al percorso 'avisynth.h' negato.
--[Error] [10/12/2015 14:45:19] Could not install module 'AviSynth plugins'.
--[Error] [10/12/2015 14:45:19] Failed to install package AviSynth plugins: Backup file cannot be created.
--[Error] [10/12/2015 14:45:20] Packages which have not been successfully updated: 1


http://s12.postimg.org/gigdjcsft/log.jpg (http://postimg.org/image/gigdjcsft/)

[Nikolausr]

Just use the x86 build. x64 development has apparently stopped, the x264 version is from 2012 and it doesn't support x265.

If you really want to use the x64 version, here's how to get it working:

1. Download the latest version from the OP

2. Run the updates, but don't let it update MeGUI itself or it will update to the x86 version and screw everything up. Right-click MeGUI and do "ignore updates"

3. In the updater, check "show all packages", then right click on all the disabled packages and hit "Enable".

4. The program will still throw up an error at launch complaining that it can't find certain AviSynth plugins. The ones it is looking for are the x86 versions that will crash MeGUI x64. To get the error message to go away, you can manually install the x86 versions from here:

http://www.megui.org/auto/stable/avisynth-plugin_5.7z

Unzip that to tools\avisynth_plugin\ inside your MeGUI folder. DO NOT OVERWRITE ANYTHING. As previously stated, using any of the non-x64 plugins (including convolution3dyv12, fluxsmooth, decomb, tomsmocomp, dgavcdec) will crash MeGUI.

But seriously, just use the main x86 MeGUI.

[brunosso]

Use this version! Is the last x64 edition! Updated with DEV server...you don't need to download anything else. Have avisynth portable, and all other stuff! .. maybe only haali splitter you must install!

https://mega.nz/#!74911TxK!G3z7PMywRXJnqUca_NHH552AIImV9SmemUI_wekvomo

I use this everyday, works like a charm, and i don't have problem with mp3 audio, like the x86 version

PS: there is my profiles of x264 and Oneclick encoder

[tormento]

Use this version! Is the last x64 edition! Updated with DEV server...you don't need to download anything else. Have avisynth portable, and all other stuff! .. maybe only haali splitter you must install!

https://mega.nz/#!74911TxK!G3z7PMywRXJnqUca_NHH552AIImV9SmemUI_wekvomo

I use this everyday, works like a charm, and i don't have problem with mp3 audio, like the x86 version

PS: there is my profiles of x264 and Oneclick encoder

The inside exe is x86

[brunosso]

The inside exe is x86

I notice that! I think some code on the updater, because i have the x64 version compiled, and if i run a clean setup, after first update, return the x86 exe :)

[tormento]

I notice that! I think some code on the updater, because i have the x64 version compiled, and if i run a clean setup, after first update, return the x86 exe :)

Can you place 7z of x64?

[brunosso]

Can you place 7z of x64?

https://sourceforge.net/p/megui/bugs/824/

look here! if you use other version of 7z, extraction doesn't work!

[tormento]

look here! if you use other version of 7z, extraction doesn't work!

I meant: can you upload an archive of the latest x64 version?

[chros]

Just use the x86 build. x64 development has apparently stopped, the x264 version is from 2012 and it doesn't support x265.

If you really want to use the x64 version, here's how to get it working:
...
But seriously, just use the main x86 MeGUI.
Thanks for your guide!
Yesterday I have been fooling around with x64 encoding chain (it was tedious to get it working through the command line since megui crashed all the time :) ), and I can confirm with anamorphic PAL interlaced DVD to hevc (x64 in both cases) that there's no need for x64 chain for that.
The script was fairly simple (I couldn't use yadif.dll for x64 so I found a yadifmod2 to try it out) though. This is the x32 version of it:
LoadPlugin("C:\Program Files (x86)\MeGUI\tools\dgindexnv\DGDecodeNV.dll")
DGSource("video.dgi",fieldop=0)

LoadPlugin("C:\Program Files (x86)\MeGUI\tools\avisynth_plugin\ColorMatrix.dll")
ColorMatrix(hints=true, interlaced=true)

Load_Stdcall_Plugin("C:\Program Files (x86)\MeGUI\tools\avisynth_plugin\yadif.dll")
Yadif(order=1)

Trim(19400,20900)

And the result:
x32
encoded 1501 frames in 454.17s (3.30 fps), 1135.52 kb/s, Avg QP:25.97

x64
encoded 1501 frames in 452.64s (3.32 fps), 1135.52 kb/s, Avg QP:25.96

So for this the bottleneck is definitely hevc (x64) encoding. Maybe this can be changed if you use more complex avs script.