Staxrip problem handling uncompressed avis captured via VD

[w4tt4n4b3]

I used VD 1.8.8 to capture in uncompressed (YUY2) .avi.
I load the .avi file to Staxrip and I get the following...
see the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.InvalidOperationException: No process is associated with this object.
at System.Diagnostics.Process.EnsureState(State state)
at System.Diagnostics.Process.get_HasExited()
at StaxRip.ProcessForm.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
StaxRip
Assembly Version: 1.1.1.0
Win32 Version: 1.1.1.0
CodeBase: file:///C:/Program%20Files/StaxRip/StaxRip.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
Stax
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/StaxRip/Stax.DLL
----------------------------------------
System.Core
Assembly Version: 3.5.0.0
Win32 Version: 3.5.21022.8 built by: RTM
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Could anyone explain how to work around this?
Thank you.

It may be more of an Avisynth issue though than Staxrip...
Please if anyone can tell, let me know so I post it in the Avisynth board...

[w4tt4n4b3]

Opening source files
------------------------------------------------------------

C:\Documents and Settings\Administrator\My Documents\ATP.*****************.ENG.x264i-gr.avi

General
Complete name : C:\Documents and Settings\Administrator\My Documents\ATP.*********.ENG.x264i-gr.avi
Format : AVI
Format/Info : Audio Video Interleave
File size : 54.1 GiB
Duration : 45mn 57s
Overal bit rate : 168 Mbps

Video
Format : YUV
Codec ID : YUY2
Codec ID/Info : YUV 4:2:2 as for UYVY but with different component ordering within the u_int32 macropixel
Duration : 45mn 57s
Bit rate : 165 Mbps
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 5/4
Frame rate : 25.000 fps
Standard : PAL
Resolution : 16 bits
Bits/(Pixel*Frame) : 15.952
Stream size : 53.1 GiB

Audio
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Unsigned
Codec ID : 1
Codec ID/Hint : Microsoft
Bit rate mode : Constant
Bit rate : 3072 Kbps
Channel(s) : 2 channels
Sampling rate : 96.0 KHz
Resolution : 16 bits
Stream size : 1010 MiB


------------------------------------------------------------
Demux MKV, MP4, AVI, MOV and DIVX files
------------------------------------------------------------

Preparer: Demux MKV, MP4, AVI, MOV and DIVX files
"C:\Documents and Settings\Administrator\Local Settings\Application Data\StaxRip\Applications\VirtualDubMod\VirtualDubMod.exe" /s"C:\Documents and Settings\Administrator\My Documents\ATP.*************.ENG.x264i-gr temp files\ATP***************.ENG.x264i-gr_Demux.vcf" /x

[stax76]

Maybe you can upload a sample clip to rapidshare.

[w4tt4n4b3]

The thing is that even if Staxrip will load a job and start encoding this file after some point it stops encoding. The cpu goes idle and no encoding takes place actually...

http://rapidshare.com/files/227073970/Uncompressed_avi_with_VD.avi

Here are the stats of a very short clip:
General
Complete name : C:\Documents and Settings\Administrator\My Documents\Uncompressed avi with VD.avi
Format : AVI
Format/Info : Audio Video Interleave
File size : 58.7 MiB
Duration : 2s 920ms
Overall bit rate : 169 Mbps

Video
Format : YUV
Codec ID : YUY2
Codec ID/Info : YUV 4:2:2 as for UYVY but with different component ordering within the u_int32 macropixel
Duration : 2s 920ms
Bit rate : 166 Mbps
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 5/4
Frame rate : 25.000 fps
Standard : PAL
Resolution : 16 bits
Bits/(Pixel*Frame) : 16.000
Stream size : 57.7 MiB (98%)

Audio
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Unsigned
Codec ID : 1
Codec ID/Hint : Microsoft
Duration : 2s 500ms
Bit rate mode : Constant
Bit rate : 3 072 Kbps
Channel(s) : 2 channels
Sampling rate : 96.0 KHz
Resolution : 16 bits
Stream size : 937 KiB (2%)
Interleave, duration : 49 ms (1.22 video frame)

[stax76]

I'll need the diagnostic file as explained here (http://forum.doom9.org/showthread.php?p=1155409#post1155409).

[w4tt4n4b3]

Well the problem is that the Staxrip won'tcrash in the end, it will go idle (the cpu and x264.exe) when encoding...

I will share with you some of the logs from similar files...

I will load the small clip I uploaded in previous post and I will send you a report.

[Guest]

@w4tt4n4b3

Where are you getting these files? They have torrent-like names and you are obscuring them.

[w4tt4n4b3]

@w4tt4n4b3

Where are you getting these files? They have torrent-like names and you are obscuring them.

Is this in any way related to the staxrip problem?
I am not getting them from anywhere.
I create them.

[Guest]

I create them. How did you create them and why are you obscuring file names?

[w4tt4n4b3]

How did you create them and why are you obscuring file names?

Is this relevant to the staxrip problem?
Are you implying that the problem is the name of the files I am trying to encode?
I could never imagine that an encoding application could be that sophisticated...