uncropMKV - get your video files to AVCHD/BD compliant resolution/level/ref frames

[setarip_old]

@gcrutcher

Hi!I am now faced with a situation where ver.05 nor ver.08 does not uncrop the moview (1920x800).Based on your stated resolution (of a movie), it would appear that your original source material was eihter a BluRay disc or an HD-DVD disc - both of which would have original resolution of true 1080p or 1080i.

If so, why would you first create an MKV with a cropped resolution of 1920x800 (rather than 1920x1080) - and then try using "UncropMKV" to return to the priginal resolution?

[deank]

Nothing in the encoding/processing is changed in uncropMKV. If it stopped working - the cause is at your side.

[odwoh]

Hi ...

Is there anyway to have the output from uncropmkv be made to fit DVD5, DVD9 etc. by altering the bitrate?

Popbd is fine if you want to span multiple disks but my inclination is to use just 1 DVD9 unless the bitrate is to slow.


thx

[canarias]

This is not mediainfo :)
You'll find mediainfo.exe in tools folder.

Mediainfo.exe dont start. Just a black screen for a half second, then its gone.

canarias

[deank]

you need to open it from the command prompt...

[busymnouse]

hi,dank,can you put a function into this software?its like this:
i can input bunch of mkvs into it,and software will check automaticly the file is 1080 or 720,if it fits,leave it.if not,uncrop it to the right size,and replace the old file with old name,and delete the old file. sorry about bad english,hope you can understand it.:(

[canarias]

you need to open it from the command prompt...

Witch command i have to type?

C:\ProgrammeA\uncropMKV\tools>mediainfo.exe
Usage: "MediaInfo [-Options...] FileName1 [Filename2...]"
"MediaInfo --Help" for displaying more information

thx

canarias

[canarias]

Sorry, oyher question in this case:

What does this mean?

B-pyramid level 1 detected. Shift DTS to 2 frames

Thx
canarias

[deank]

It is a notice from tsMuxeR of how final m2ts stream will be constructed, based on the b-frames presence.

[ericd]

thx dean for everything i have a problem i just downloaded the 0.8 version and don t have the "start" option to make the uncrop ??? is this normal ??my mkv is a 1280x536 and want to make it 1280x720.
thank you dean

ericd

[deank]

Make sure you've read all things I posted in the 1st page of this thread.

1) Load your file
2) Click the "QUEUE" button
3) Then you can click "START"

This allows you to add multiple files (to the queue list) and process them in one.

[rendez2k]

Think I'm being a bit dim with this: my input video is 1920x800, and uncrop value is 1920x1080 but my video was still at the wrong pixel size after processing. Should it not be 1920x1080?

[deank]

Try to 'force' the uncrop by selecting "1920x800" in "resize" drop-down. By default it is selected, but there is another 1920x800 after it - use the second.

[ericd]

Make sure you've read all things I posted in the 1st page of this thread.

1) Load your file
2) Click the "QUEUE" button
3) Then you can click "START"

This allows you to add multiple files (to the queue list) and process them in one.

oupss... i forgot the queue button sorry deank an thx again for our work..:thanks:

[deank]

For questions and support, please visit uncropMKV forum:

http://multiforum.deanbg.com/viewtopic.php?f=3&t=3

[deank]

Uncrop/resize/reencode functionality is now added to multiAVCHD to ease the process of converting (mkv/mp4) files to compliant video, required by AVCHD/BD standards.

More... (http://multiforum.deanbg.com/viewtopic.php?f=2&t=18&start=116)

[maldino800]

Hello deank
Why my laptop shut down after afew minnutes when I use uncropMKV program??

[deank]

Because it was on batteries?!

How could you expect me to be able answer that :)

[maldino800]

Because it was on batteries?!

How could you expect me to be able answer that :)

hhhhhhh sorry.but the batteries is on all times.may be this program need the more power of prosessor,because my pc be very hot.

[deank]

Yes, it needs a lot of processing power and if you're using a laptop it should have good ventilation. It is possible it shut-off because of overheating.

[maldino800]

Yes, it needs a lot of processing power and if you're using a laptop it should have good ventilation. It is possible it shut-off because of overheating.

Thank you deank.this program is very great and just I need it.before I used mkv2vob and it was takes a very long times,over 20 hours(mkv 4gb) with encode video...but now with this program just a few hour 2 or 3 hour;)

[maldino800]

Hello dean.
I sucsesful uncroped one film 1920*1040 to 1920*1080,but when I am playing it in ps3 the film stopped after about 1 hour,I am trying with tow films,but still the same problem,,I used this setting cropT/B=0 .resize=1920*1080 . uncrop to=1920*1080 and the other default,,where is the proble??I can not use crop T/B because 1040 it means 40 divided by 2 =20,and ther is no have 20 in the cropT/B text box,so what shoul I do?

is this setting correct??when I will use trim end?
http://img229.imageshack.us/img229/2825/0607z.th.png (http://img229.imageshack.us/i/0607z.png/)

[deank]

Such resolutions may not need uncropping... 1920x1040 is really close to 1080p so you won't notice it in PS3.

No, you don't need to set the "Crop T/B" to anything than "0". Crop "CROPS" your original video, and you don't need that. This option is useful if your video was 1920x1100 for example.. then Crop 10 will remove 20 pixels...

How big is the output -uncropped.mkv?

[maldino800]

Such resolutions may not need uncropping... 1920x1040 is really close to 1080p so you won't notice it in PS3.

No, you don't need to set the "Crop T/B" to anything than "0". Crop "CROPS" your original video, and you don't need that. This option is useful if your video was 1920x1100 for example.. then Crop 10 will remove 20 pixels...

How big is the output -uncropped.mkv?

But I must change the resolution to 1920*108 because if I use 1920*1040 and when I use tsmuxer or mkv2vob the results is a big black or green bar at the button on video...just 1920*1080 and 1280*720 results without black and green bar..

input video was 4.3gb
uncroped output video was 2 gb way?
Can I use trim end with all types resolutions?

[deank]

Yes, you can... i don't know how 40 pixels are a 'big black/green' bar... but anyway.

[maldino800]

now if I have mkv with resolution 720*544 wich setting is good for quality of video without black,green bar?
crop T/B =?
resize=?
uncrop to?
Bitrate=?

[deank]

If you're in a PAL area (have PAL player) and if the FPS of your video is PAL (25fps) then you should use uncrop to 720x576, otherwise you can

1) resize to 720x480
or
2) crop 32 pixels from top and bottom and get it to 720x480.

[maldino800]

If you're in a PAL area (have PAL player) and if the FPS of your video is PAL (25fps) then you should use uncrop to 720x576, otherwise you can

1) resize to 720x480
or
2) crop 32 pixels from top and bottom and get it to 720x480.
I am sorry I was wrong,confused...the resolution is 1280*544
so wich setting will be good,I am in pal area??

[deank]

uncrop to 1280x720... what else...

[maldino800]

uncrop to 1280x720... what else...
so you mean
CropT/B =0
resize=1280x720
uncrop to=1280x720 ??

[deank]

No... just uncrop... you don't need to resize.

[maldino800]

No... just uncrop... you don't need to resize.
But without resize 128*720 the result resolution will not be exact 1280*720,and may be will happen the black bar when playing AVCHD in ps3?

[deank]

No it won't. You seem not to understand what is 'resize' and what is 'uncrop'.

The program will use your original resolution and add borders to extend it to 720p. That's why you don't need to use resize - leave it to default.

Resize is applied to the original resolution, so you don't want to change it!

[maldino800]

No it won't. You seem not to understand what is 'resize' and what is 'uncrop'.

The program will use your original resolution and add borders to extend it to 720p. That's why you don't need to use resize - leave it to default.

Resize is applied to the original resolution, so you don't want to change it!

Ok in my case now 1280*544 we do not need resize.in wich case we need to use the resize,one example?
Is 11 hour normal with 9 gb mkv film?

[deank]

What you get in the PREVIEW window - that's how the output will look like. If you need to resize - you'll know.

It depends on the speed of your computer and encoding time varies.

[maldino800]

What you get in the PREVIEW window - that's how the output will look like. If you need to resize - you'll know.

It depends on the speed of your computer and encoding time varies.

That I get in the PREVIEW window in my pc will be the same size and quality video in my ps3?

[deank]

More help you may get here (http://multiforum.deanbg.com/viewforum.php?f=3).

I think you're trying to challenge my patience and my will to help you.

If you can't figure out how to use uncropMKV - there are many other (may be better) programs that you can use.

[maldino800]

More help you may get here (http://multiforum.deanbg.com/viewforum.php?f=3).

I think you're trying to challenge my patience and my will to help you.

If you can't figure out how to use uncropMKV - there are many other (may be better) programs that you can use.
Please do not be angry with me,I really need to know all about program and need your help...now the last equation.
I have 1280*544 resolution
If I use resize 1280*720 there will be full screen
but if I use original 1280*544 there will be black border(not full screen)
So wich will be good quality video with full screen or with black border?

[deank]

The better way is to let the resize option to (no change) (1280x544) and get the black bars (uncropping).

If you use resize to 1280x720 (full screen) your video will be STRETCHED vertically and the aspect ratio will be wrong.

Dean

[Guest]

@maldino800

Where did you get the 9 gb mkv film?

[maldino800]

The better way is to let the resize option to (no change) (1280x544) and get the black bars (uncropping).

If you use resize to 1280x720 (full screen) your video will be STRETCHED vertically and the aspect ratio will be wrong.

Dean

Ok.now I am understanding a lot of in your program.It is really great program..
I am sorry if I asked you so many equations that is because I am newbee this program is new for me.

[maldino800]

@maldino800

Where did you get the 9 gb mkv film?


is 8.98 gb

[deank]

Not good. (http://forum.doom9.org/forum-rules.htm)

[maldino800]

Hey
I uncropped one film 1920*1040 I used original resize 1920*1080 and uncrop to 1920*1080 and the results was 1920*1120,it is perfect when I playing with computer,but in my TV sound and subtitle perfect but the screen is all black and no foto,what did I am wrong?

[Guest]

I uncropped one film 1920*1040 Where did you get the 1920*1040 film?

[maldino800]

Where did you get the 1920*1040 film?

Why you try to make me violate forum rule,this is not good brother.you violated forum rule with that and do not respect to other..
Where I am get the film is not the issues here.

[djhazardous]

Whenever I click 'Queue' & then 'Start' a Command Prompt opens for a matter of seconds with MKVMerge and immediately closes.

The program then tells me the operation has been completed but obviously, nothing happened at all.

Any idea why MKVMerge keeps closing? I am using the latest version of MultiAVCHD with uncropMKV and also FFDShow, Haali Media Splitter & AVISinth.

[djhazardous]

Help, please?

[deank]

When you load your mkv file if you don't see a preview then it won't work. No preview means - no proper ffdshow/avisynth/splitter configuration.

[konstlaoum]

HI Dean, and thanks for the uncropmkv-seems to be a great application. Ihave done some mkv, files uncropped with good results,but with the last one :1920.1072 to1920.1080 there seems to be a problem with bad audio and subs sync. Ihave tried it three times , i have tried to deactivate pre and post processing in ffdshow ( as you mentioned before, but i am not sure if i did it correctly), i tried trim end(but the output file was much smaller and of bad quality), but no results at all. Any suggestions? Kostas, Greece