Burning problem on jmicron+LG

[Gannjunior]

I've just update my burner buying a LG H55L 1.05 fw.
It seems to burn well, but i have a problem when i burn in UDF...just the burn begins, after a couple of seconds the burn fails. I report below the log of Nero 8.
I suspect there could be something wrong with the controller that is jmicron. The other components of my PC in signature.
thanks in advance.

ciao!


Windows Vista 6.0
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 8.3.6.0
Internal Version: 8, 3, 6, 0

Recorder: <HL-DT-ST DVD-RAM GSA-H55L>Version: 1.05 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVD-RAM GSA-H55L>Version: 1.05 - HA 1 TA 0 - 8.3.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD740ADFD-00NLR4 iaStor Port 0 ID 0 DMA: On
DiskPeripheral : Volume_0000 iaStor Port 0 ID 1 DMA: Off
DiskPeripheral : ST3500630AS iaStor Port 0 ID 2 DMA: Off
DiskPeripheral : ST3750840AS JRAID Port 1 ID 0 DMA: Off
CdRomPeripheral : HL-DT-STDVD-RAM GSA-H55L1.05 JRAID Port 1 ID 1 DMA: Off
DiskPeripheral : MAXTOR 6L040J2 JRAID Port 1 ID 2 DMA: Off
CdRomPeripheral : KHGRUJ SLEZG9UZ8DI7 1.03 azfa8n03 Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55L M: CdRom0
KHGRUJ SLEZG9UZ8DI7 O: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use : 20 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.9.2008
UDF compilation
16.26.35 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

16.26.35 #2 Text 0 File Isodoc.cpp, Line 6713
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

16.26.35 #3 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media

16.26.35 #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

16.26.35 #5 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1559247 (346:29.72, 3045MB)

16.26.35 #6 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

16.26.35 #7 Text 0 File DlgWaitCD.cpp, Line 2948
Recorder: HL-DT-ST DVD-RAM GSA-H55L, Media type: DVD-R
Disc Manufacturer ID: <MCC 03> <RG20 >
Disc Application Code: 64, Disc Physical Code: 193

16.26.35 #8 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16.26.35 #9 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1559248 (1559248) = #1559248/346:29.73
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1559248 blocks [M: HL-DT-ST DVD-RAM GSA-H55L]
--------------------------------------------------------------

16.26.35 #10 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [M: HL-DT-ST DVD-RAM GSA-H55L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3193339904, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1559248 | 0 | 0x00
1559248 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

16.26.35 #11 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

16.26.35 #12 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

16.26.35 #13 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

16.26.35 #14 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

16.26.35 #15 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

16.26.35 #16 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 16x (22.160 KB/s)

16.26.35 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16.26.35 #18 Text 0 File DVDR.cpp, Line 3297
Recording mode: Sequential Recording Mode

16.26.35 #19 Text 0 File DVDR.cpp, Line 3451
Start write address at LBA 0
DVD high compatibility mode: Yes

16.26.35 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x0b7e4d80: Len x648

16.26.35 #21 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 85 0D 0E 88 9A 80 00 .@....R.........
03 4D 43 43 20 30 33 00 - 04 52 47 32 30 20 20 00 .MCC.03..RG20...
05 88 80 00 00 00 02 00 - 06 09 0B 14 87 78 90 00 .............x..
07 88 80 00 00 00 00 00 - 08 08 13 0D 11 0C 08 00 ................
09 95 07 0E 0B 78 88 00 - 0A A0 00 20 00 20 10 00 .....x..........
0B 06 1A 17 86 67 85 00 - 0C 99 AB 3A 83 20 32 00 .....g.....:..2.
0D 00 00 D0 00 00 00 00 - 0E 0A 24 35 2F 29 1A 00 ..........$5/)..
0F 50 1B 29 17 97 B5 00 - 10 88 80 00 00 00 00 00 .P.)............
11 00 00 00 00 00 00 00 - 12 09 2E 37 2F 29 19 00 ...........7/)..
13 50 1B 29 17 97 B5 00 - 14 88 80 00 00 00 00 00 .P.)............
15 00 00 00 00 00 00 00 - 16 09 3F 44 3D 24 29 00 ..........?D=$).
17 60 1F 2F 1D 97 B5 00 - 18 88 84 00 04 00 04 00 .`./............
19 00 00 00 00 00 00 00 - 1A 08 57 46 42 27 24 00 ..........WFB'$.
1B 70 1F 2B 0F AA B5 00 - 1C 88 84 00 04 00 04 00 .p.+............
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

16.26.35 #22 Text 0 File DVDR.cpp, Line 3589
Reserved Track size: 1559248 (17CAD0h, 3045MB) -> return code 0

16.26.35 #23 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

16.26.36 #24 SPTI -1114 File SCSIPassThrough.cpp, Line 214
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
Sense Area: 0x70 00 06 00 00 00 00 0E 00 00 00 00 29
Buffer x190b0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

16.26.36 #25 CDR -1114 File Writer.cpp, Line 306
Reset occurred
M: HL-DT-ST DVD-RAM GSA-H55L

16.27.54 #26 Text 0 File DVDR.cpp, Line 3857
EndDAO: Last written address was -1 (FFFFFFFFh)

16.27.54 #27 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 16x (22.160 KB/s)

16.27.54 #28 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

16.27.55 #29 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed

16.27.55 #30 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

[Gannjunior]

i have to specify the problem is if burn UDF (for example when i have to burn big files greater than 3gb). Other kinds of burns go fine...

[CWR03]

i have to specify the problem is if burn UDF (for example when i have to burn big files greater than 3gb).
Therein lies your problem.

[Gannjunior]

sorry, what do you mean?

[CWR03]

The problem is that you can't burn such large files that way.

[talen9]

Well, not with the kind of filesystem which is usually used when producing data DVDs, that is ISO9660 and/or Joliet extension ... when you have to write files greater than 2 GBytes (not 3, mind you GannJunior), than the only way you can do it is using an UDF filesystem.

If >3 GBytes files weren't supported by the software and/or writer, it should stop you *before* starting the burning phase, btw ...


@GannJunior: you can try with ImgBurn ... though I suspect some kind of hardware mulfunction/conflict (old and thouroughly used drive? DVDs of no certified quality or not very well compatible with the burner?).

[Gannjunior]

CWR03,
if you try to burn a 3Gb files by "dvd (iso)" the same Nero tells you that you can't and that you have to burn it by "dvd (UDF)"...
And (answering to talen9) my previous 2 years old burner, - that i use until last month - that was a samsung SH-S162L, burned file larger than 3gb in UDF mode without any problem.

I will try too ImgBurn, but it always worked using Nero...i don't know, it sounds me strange...
My DVDs are always the best: Verbatim superazo+ (MCC or TY). Think that i bought this LG since it's able to write at 20x my 16x verbatim. And it does! and i checked the writing graph that is good!

ciao!

[Gannjunior]

Other ideas? :-)

ciao!

[Dr.Khron]

Sorry, nothing helpfull, but I must take this opportunity to bad-mouth the Jmicron controller. Its a buggy piece of junk used to graft obsolete ports onto a modern southbridge. And it slows down your boot, too.

My Abit mainboard has one. At first all I had plugged in was my two optical drives. But it became such a pain in the ass that I went out and bought new SATA burners, just so I could disable the Jmicron chip.

[setarip_old]

@Gannjunior

Hi!if you try to burn a 3Gb files by "dvd (iso)" the same Nero tells you that you can't and that you have to burn it by "dvd (UDF)"...Try scrolling down to and selecting the LAST left-side icon in NERO - "UDF-ISO"...