Using "Jump to PGC Upon DVD Insert" isn't working for me ... [Archive]

View Full Version : Using "Jump to PGC Upon DVD Insert" isn't working for me ...

grace-wong

27th August 2008, 07:30

Hi,

When I pop in the disc I'd like to edit for playback, the first screen that pops up is the language screen - fair enough. I'd like to jump immediately to the main menu instead of this, which is a fairly common thing to do. I followed blutach's excellent guide explaining how to "Jump to PGC upon DVD Insert" ( http://www.digital-digest.com/~blutach/Jump2PGC/Jump2PGC_guide.html ) and I run into a rather unexpected problem - and I'm not sure how to solve it.

I trace to the menu I want, then run "Trace – Toggle PGC Pre/Post Breakpoint", check that this is what I want, then try to choose "PGC – Jump to PGC Upon DVD Insert". Only problem is, I get this error message:

ERROR: To jump to a PGC in the VTST domain, you must select a Title entry (ie. a PGC with a Title number in the PGC Selector).

The Root Menu directly above it has no buttons, but is essentially a big blank, so jumping to that instead, which eventually leads to the menu I want is also a no-go, because there's no way to actually trace to it - when I just try highlighting it and jump to PGC, I get this error message:

ERROR: You must go to the target PGC using the trace. Do not select a PGC manually in the PGC Selector pane, and do not select a command manually in the main panel. You should use only the trace navigation buttons (and select the right DVD menu buttons if needed).

(I must admit, I was kinda expecting this last one). I'm not sure that anything I just said makes any sense ... :) ... but in any event, is there any way to jump to the menu that I want using PGCEdit? Any help would be appreciated.

Thanks,

Grace

r0lZ

27th August 2008, 11:34

I guess that your target menu is authored in the title domain using BOVs (and the label of its PGC begins by VTST). Right?

Unfortunately, Jump2PGC can jump only to any PGC with video contents in a menu domain (VMGM or VTSM) or to the entry PGC of any Title. If your menu is in a VTST and is not the entry PGC of that title, you cannot reach it directly.

However, it might be possible to modify the procedure slightly to reach your target menu. Use exactly the method explained in Blutach's guide, but instead of setting the breakpoint on your target PGC, set it to the entry PGC of the same title (same TTN number, but with a "Title X" in the label). After having applied the Jump2PGC function, PgcEdit should have added several commands at the beginning of the pre-commands area of the Title PGC, such as:

********** pre commands:
[00 B1 00 0F 03 FE 00 09] 1 if ( gprm(15:Jump2PGC_control) != 1022 ) then { Goto line 9 }
[71 00 00 0F 00 00 00 00] 2 Set gprm(15:Jump2PGC_control) =(mov) 0
[71 00 00 01 04 00 00 00] 3 Set gprm(1) =(mov) 1024
[71 00 00 02 00 01 00 00] 4 Set gprm(2) =(mov) 1
[71 00 00 03 04 00 00 00] 5 Set gprm(3) =(mov) 1024
[71 00 00 05 00 01 00 00] 6 Set gprm(5) =(mov) 1
[71 00 00 06 00 00 00 00] 7 Set gprm(6) =(mov) 0
[56 00 00 00 04 00 00 00] 8 (SetHL_BTN) Set Highlighted Button =(mov) 1024 (button 1)
[00 00 00 00 00 00 00 00] 9 NOP
[41 00 00 86 00 00 00 00] 10 ... (original commands)

(There might be several other Set commands.)

Then, insert a new command just before the NOP pointed to by the GoTo of the first command, to jump to your real target PGC. (I assume it's PGC 3.) You might have to modify (or insert) the SetHL_BTN command to highlight the button you want highlighted by default.

********** pre commands:
[00 B1 00 0F 03 FE 00 0A] 1 if ( gprm(15:Jump2PGC_control) != 1022 ) then { Goto line 10 }
[71 00 00 0F 00 00 00 00] 2 Set gprm(15:Jump2PGC_control) =(mov) 0
[71 00 00 01 04 00 00 00] 3 Set gprm(1) =(mov) 1024
[71 00 00 02 00 01 00 00] 4 Set gprm(2) =(mov) 1
[71 00 00 03 04 00 00 00] 5 Set gprm(3) =(mov) 1024
[71 00 00 05 00 01 00 00] 6 Set gprm(5) =(mov) 1
[71 00 00 06 00 00 00 00] 7 Set gprm(6) =(mov) 0
[56 00 00 00 08 00 00 00] 8 (SetHL_BTN) Set Highlighted Button =(mov) 2048 (button 2)
[20 04 00 00 00 00 00 03] 9 LinkPGCN PGC 3
[00 00 00 00 00 00 00 00] 10 NOP
[41 00 00 86 00 00 00 00] 11 ... (original commands)
(Note that the GoTo must still point to the NOP.)

With some luck, that should be sufficient.

grace-wong

27th August 2008, 22:32

Woo hoo !! :)

It took a wee bit of tweaking, but it works great now - many thanks yet again, r0lZ - I know I can always count on you to solve my authoring problems ... :)

Grace

grace-wong

28th August 2008, 03:37

Okay, I am *thoroughly* weirded out here ... I got the authoring to work just fine when I double-click on the VIDEO_TS.IFO file in Windows Explorer - ie. I double-click on it, and the main menu comes up immediately, just like I wanted it ... however, I've tried burning it twice now, and when I play back the burned disc, the language menu comes up just like it did before ... I've never seen this happen before - whassup wit' dat ?? And is there any way around it ??

Grace

setarip_old

28th August 2008, 05:46

Hi!when I double-click on the VIDEO_TS.IFO file in Windows ExplorerWhat program is playing the DVD when you doubleclick on the VIDEO_TS.IFO file (With what program have you associated ".IFO"?)

r0lZ

28th August 2008, 08:59

grace-wong

28th August 2008, 19:52

What program is playing the DVD when you doubleclick on the VIDEO_TS.IFO file (With what program have you associated ".IFO"?)

I've got all my video files of all sorts associated with WMP Classic v.6.4.9.0 ...

Grace

grace-wong

28th August 2008, 20:35

Well, that's abnormal, of course. All players should behave the same way, but it is well known that the software players have some bugs that could explain the difference. Could you post here the commands of the PGCs that have been modified by the function: the First-Play PGC, the entry PGC of the title (where you've applied the function) and your real target PGC? It is possible that some GPRMs are not correctly initialized by the Jump2PGC function, as, with the method I've explained, the trace has been stopped too early.

Here you go ...

-----

First-Play PGC (VMG , First-Play PGC)

********** pre commands:
[71 00 00 0F 03 FE 00 00] 1 Set gprm(15) =(mov) 1022
[30 02 00 00 00 04 00 00] 2 (JumpTT) Jump to Title 4
********** post commands:
********** cell commands:

-----

Entry PGC (VTST 4 , 1 TTN 1 (0:01) Title 4)

********** pre commands:
[00 B1 00 0F 03 FE 00 15] 1 if ( gprm(15) != 1022 ) then { Goto line 21 }
[71 00 00 0F 00 00 00 00] 2 Set gprm(15) =(mov) 0
[71 00 00 00 FF FF 00 00] 3 Set gprm(0) =(mov) 65535
[71 00 00 01 00 00 00 00] 4 Set gprm(1) =(mov) 0
[71 00 00 02 00 00 00 00] 5 Set gprm(2) =(mov) 0
[71 00 00 03 03 E7 00 00] 6 Set gprm(3) =(mov) 999
[71 00 00 04 00 00 00 00] 7 Set gprm(4) =(mov) 0
[71 00 00 05 00 00 00 00] 8 Set gprm(5) =(mov) 0
[71 00 00 06 00 00 00 00] 9 Set gprm(6) =(mov) 0
[71 00 00 07 00 00 00 00] 10 Set gprm(7) =(mov) 0
[71 00 00 08 00 00 00 00] 11 Set gprm(8) =(mov) 0
[71 00 00 09 00 04 00 00] 12 Set gprm(9) =(mov) 4
[71 00 00 0A 00 00 00 00] 13 Set gprm(10) =(mov) 0
[71 00 00 0B 04 00 00 00] 14 Set gprm(11) =(mov) 1024
[71 00 00 0C 00 00 00 00] 15 Set gprm(12) =(mov) 0
[71 00 00 0D 00 3F 00 00] 16 Set gprm(13) =(mov) 63
[71 00 00 0E 00 00 00 00] 17 Set gprm(14) =(mov) 0
[71 00 00 0F 00 3F 00 00] 18 Set gprm(15) =(mov) 63
[56 00 00 00 04 00 00 00] 19 (SetHL_BTN) Set Highlighted Button =(mov) 1024 (button 1)
[20 04 00 00 00 00 00 01] 20 LinkPGCN PGC 1
[00 00 00 00 00 00 00 00] 21 NOP
[00 A1 00 09 00 04 00 18] 22 if ( gprm(9) == 4 ) then { Goto line 24 }
[30 08 00 03 01 C0 00 00] 23 (CallSS) Call the VMGM PGC 3, resume cell 1
[71 00 00 09 00 03 00 00] 24 Set gprm(9) =(mov) 3
[30 08 00 05 01 C0 00 00] 25 (CallSS) Call the VMGM PGC 5, resume cell 1
********** post commands:
********** cell commands:
[20 01 00 00 00 00 00 0D] 1 LinkTailPGC

-----

Target PGC (VTST 1 , 5 TTN 1 (3:25) 30b.)

********** pre commands:
[00 91 00 0A 00 02 00 07] 1 if ( gprm(10) & 2 ) then { Goto line 7 }
[7A 00 00 0A 00 02 00 00] 2 Set gprm(10) |=(or) 2
[20 A6 00 08 00 02 00 05] 3 if ( gprm(8) == 2 ) then { LinkPGN Program 5 }
[20 A6 00 08 00 01 00 03] 4 if ( gprm(8) == 1 ) then { LinkPGN Program 3 }
[20 06 00 00 00 00 00 01] 5 LinkPGN Program 1
[00 00 00 00 00 00 00 00] 6 NOP
[00 00 00 00 00 00 00 00] 7 NOP
[20 A6 00 08 00 02 00 06] 8 if ( gprm(8) == 2 ) then { LinkPGN Program 6 }
[20 A6 00 08 00 01 00 04] 9 if ( gprm(8) == 1 ) then { LinkPGN Program 4 }
[20 06 00 00 00 00 00 02] 10 LinkPGN Program 2
********** post commands:
********** cell commands:
[20 01 00 00 00 00 00 05] 1 LinkTopPG
[20 01 00 00 00 00 00 0D] 2 LinkTailPGC
[20 27 00 0E 00 0E 00 0B] 3 if ( gprm(14) == gprm(14) ) then { LinkCN Cell 11 }
[20 17 00 0E 00 0D 00 03] 4 if ( gprm(14) & gprm(13) ) then { LinkCN Cell 3 }
[20 27 00 0E 00 0D 00 0A] 5 if ( gprm(14) == gprm(13) ) then { LinkCN Cell 10 }
[6B 00 00 0E 00 0D 00 00] 6 Set gprm(14) ^=(xor) gprm(13)
[20 C7 00 0E 00 01 00 08] 7 if ( gprm(14) >= 1 ) then { LinkCN Cell 8 }
[20 07 00 00 00 00 00 0E] 8 LinkCN Cell 14

-----

I know you'll be able to make some sense of it, because I sure as hell can't ... :)

Thanks,

Grace

setarip_old

28th August 2008, 22:53

Have you tried playing your burned DVD on a standalone DVD player?

blutach

28th August 2008, 23:34

Hi Grace,

As you can see, the nav works by going to Title 4 from First play. Follow the logic and gprm(9) is set to 4 (line 12) and gprm(15) is set to 63 (line 18) and you start the title again (Link PGCN 1 - line 20). This takes you to the start of title 4 again, where you execute line 1 and jump immediately to line 21, due to gprm(15) passing the test. Now you go to line 24, since gprm(9) passes the test of being 4 (line 22), where gprm(9) is set to 3 (line 24) and you then branch to VMGM 5 (line 25). You'd need to post the commands of VMGM 5, too please.

Regards

grace-wong

29th August 2008, 03:03

Have you tried playing your burned DVD on a standalone DVD player?

Nah, that's too obvious ... :)

Okay, now I feel like a complete idiot ... I did as you suggested and popped it into a standalone player, and voila !! Worked just like I wanted it to ... oy ... :\

That does beg the next question though - why did it do that ??

Grace

grace-wong

29th August 2008, 03:09

As you can see, the nav works by going to Title 4 from First play. Follow the logic and gprm(9) is set to 4 (line 12) and gprm(15) is set to 63 (line 18) and you start the title again (Link PGCN 1 - line 20). This takes you to the start of title 4 again, where you execute line 1 and jump immediately to line 21, due to gprm(15) passing the test. Now you go to line 24, since gprm(9) passes the test of being 4 (line 22), where gprm(9) is set to 3 (line 24) and you then branch to VMGM 5 (line 25). You'd need to post the commands of VMGM 5, too please.

No problem ... here you go ...

-----

VMGM , LU 1 (en) , 5 (dummy)

********** pre commands:
[20 D4 00 09 00 32 00 06] 1 if ( gprm(9) > 50 ) then { LinkPGCN PGC 6 }
[00 D1 00 09 00 28 00 56] 2 if ( gprm(9) > 40 ) then { Goto line 86 }
[00 D1 00 09 00 1E 00 42] 3 if ( gprm(9) > 30 ) then { Goto line 66 }
[00 D1 00 09 00 14 00 2E] 4 if ( gprm(9) > 20 ) then { Goto line 46 }
[00 D1 00 09 00 0A 00 1A] 5 if ( gprm(9) > 10 ) then { Goto line 26 }
[00 B1 00 09 00 01 00 08] 6 if ( gprm(9) != 1 ) then { Goto line 8 }
[30 02 00 00 00 01 00 00] 7 (JumpTT) Jump to Title 1
[00 B1 00 09 00 02 00 0A] 8 if ( gprm(9) != 2 ) then { Goto line 10 }
[30 02 00 00 00 02 00 00] 9 (JumpTT) Jump to Title 2
[00 B1 00 09 00 03 00 0C] 10 if ( gprm(9) != 3 ) then { Goto line 12 }
[30 02 00 00 00 03 00 00] 11 (JumpTT) Jump to Title 3
[00 B1 00 09 00 04 00 0E] 12 if ( gprm(9) != 4 ) then { Goto line 14 }
[30 02 00 00 00 04 00 00] 13 (JumpTT) Jump to Title 4
[00 B1 00 09 00 05 00 10] 14 if ( gprm(9) != 5 ) then { Goto line 16 }
[30 02 00 00 00 05 00 00] 15 (JumpTT) Jump to Title 5
[00 B1 00 09 00 06 00 12] 16 if ( gprm(9) != 6 ) then { Goto line 18 }
[30 02 00 00 00 06 00 00] 17 (JumpTT) Jump to Title 6
[00 B1 00 09 00 07 00 14] 18 if ( gprm(9) != 7 ) then { Goto line 20 }
[30 02 00 00 00 07 00 00] 19 (JumpTT) Jump to Title 7
[00 B1 00 09 00 08 00 16] 20 if ( gprm(9) != 8 ) then { Goto line 22 }
[30 02 00 00 00 08 00 00] 21 (JumpTT) Jump to Title 8
[00 B1 00 09 00 09 00 18] 22 if ( gprm(9) != 9 ) then { Goto line 24 }
[30 02 00 00 00 09 00 00] 23 (JumpTT) Jump to Title 9
[00 B1 00 09 00 0A 00 1A] 24 if ( gprm(9) != 10 ) then { Goto line 26 }
[30 02 00 00 00 0A 00 00] 25 (JumpTT) Jump to Title 10
[00 B1 00 09 00 0B 00 1C] 26 if ( gprm(9) != 11 ) then { Goto line 28 }
[30 02 00 00 00 0B 00 00] 27 (JumpTT) Jump to Title 11
[00 B1 00 09 00 0C 00 1E] 28 if ( gprm(9) != 12 ) then { Goto line 30 }
[30 02 00 00 00 0C 00 00] 29 (JumpTT) Jump to Title 12
[00 B1 00 09 00 0D 00 20] 30 if ( gprm(9) != 13 ) then { Goto line 32 }
[30 02 00 00 00 30 00 00] 31 (JumpTT) Jump to Title 48
[00 B1 00 09 00 0E 00 22] 32 if ( gprm(9) != 14 ) then { Goto line 34 }
[30 02 00 00 00 31 00 00] 33 (JumpTT) Jump to Title 49
[00 B1 00 09 00 0F 00 24] 34 if ( gprm(9) != 15 ) then { Goto line 36 }
[30 02 00 00 00 32 00 00] 35 (JumpTT) Jump to Title 50
[00 B1 00 09 00 10 00 26] 36 if ( gprm(9) != 16 ) then { Goto line 38 }
[30 02 00 00 00 33 00 00] 37 (JumpTT) Jump to Title 51
[00 B1 00 09 00 11 00 28] 38 if ( gprm(9) != 17 ) then { Goto line 40 }
[30 02 00 00 00 34 00 00] 39 (JumpTT) Jump to Title 52
[00 B1 00 09 00 12 00 2A] 40 if ( gprm(9) != 18 ) then { Goto line 42 }
[30 02 00 00 00 35 00 00] 41 (JumpTT) Jump to Title 53
[00 B1 00 09 00 13 00 2C] 42 if ( gprm(9) != 19 ) then { Goto line 44 }
[30 02 00 00 00 36 00 00] 43 (JumpTT) Jump to Title 54
[00 B1 00 09 00 14 00 2E] 44 if ( gprm(9) != 20 ) then { Goto line 46 }
[30 02 00 00 00 37 00 00] 45 (JumpTT) Jump to Title 55
[00 B1 00 09 00 15 00 30] 46 if ( gprm(9) != 21 ) then { Goto line 48 }
[30 02 00 00 00 38 00 00] 47 (JumpTT) Jump to Title 56
[00 B1 00 09 00 16 00 32] 48 if ( gprm(9) != 22 ) then { Goto line 50 }
[30 02 00 00 00 39 00 00] 49 (JumpTT) Jump to Title 57
[00 B1 00 09 00 17 00 34] 50 if ( gprm(9) != 23 ) then { Goto line 52 }
[30 02 00 00 00 3A 00 00] 51 (JumpTT) Jump to Title 58
[00 B1 00 09 00 18 00 36] 52 if ( gprm(9) != 24 ) then { Goto line 54 }
[30 02 00 00 00 3B 00 00] 53 (JumpTT) Jump to Title 59
[00 B1 00 09 00 19 00 38] 54 if ( gprm(9) != 25 ) then { Goto line 56 }
[30 02 00 00 00 3C 00 00] 55 (JumpTT) Jump to Title 60
[00 B1 00 09 00 1A 00 3A] 56 if ( gprm(9) != 26 ) then { Goto line 58 }
[30 02 00 00 00 47 00 00] 57 (JumpTT) Jump to Title 71
[00 B1 00 09 00 1B 00 3C] 58 if ( gprm(9) != 27 ) then { Goto line 60 }
[30 02 00 00 00 48 00 00] 59 (JumpTT) Jump to Title 72
[00 B1 00 09 00 1C 00 3E] 60 if ( gprm(9) != 28 ) then { Goto line 62 }
[30 02 00 00 00 45 00 00] 61 (JumpTT) Jump to Title 69
[00 B1 00 09 00 1D 00 40] 62 if ( gprm(9) != 29 ) then { Goto line 64 }
[30 02 00 00 00 46 00 00] 63 (JumpTT) Jump to Title 70
[00 B1 00 09 00 1E 00 42] 64 if ( gprm(9) != 30 ) then { Goto line 66 }
[30 02 00 00 00 0D 00 00] 65 (JumpTT) Jump to Title 13
[00 B1 00 09 00 1F 00 44] 66 if ( gprm(9) != 31 ) then { Goto line 68 }
[30 02 00 00 00 0E 00 00] 67 (JumpTT) Jump to Title 14
[00 B1 00 09 00 20 00 46] 68 if ( gprm(9) != 32 ) then { Goto line 70 }
[30 02 00 00 00 0F 00 00] 69 (JumpTT) Jump to Title 15
[00 B1 00 09 00 21 00 48] 70 if ( gprm(9) != 33 ) then { Goto line 72 }
[30 02 00 00 00 10 00 00] 71 (JumpTT) Jump to Title 16
[00 B1 00 09 00 22 00 4A] 72 if ( gprm(9) != 34 ) then { Goto line 74 }
[30 02 00 00 00 11 00 00] 73 (JumpTT) Jump to Title 17
[00 B1 00 09 00 23 00 4C] 74 if ( gprm(9) != 35 ) then { Goto line 76 }
[30 02 00 00 00 12 00 00] 75 (JumpTT) Jump to Title 18
[00 B1 00 09 00 24 00 4E] 76 if ( gprm(9) != 36 ) then { Goto line 78 }
[30 02 00 00 00 13 00 00] 77 (JumpTT) Jump to Title 19
[00 B1 00 09 00 25 00 50] 78 if ( gprm(9) != 37 ) then { Goto line 80 }
[30 02 00 00 00 14 00 00] 79 (JumpTT) Jump to Title 20
[00 B1 00 09 00 26 00 52] 80 if ( gprm(9) != 38 ) then { Goto line 82 }
[30 02 00 00 00 15 00 00] 81 (JumpTT) Jump to Title 21
[00 B1 00 09 00 27 00 54] 82 if ( gprm(9) != 39 ) then { Goto line 84 }
[30 02 00 00 00 16 00 00] 83 (JumpTT) Jump to Title 22
[00 B1 00 09 00 28 00 56] 84 if ( gprm(9) != 40 ) then { Goto line 86 }
[30 02 00 00 00 17 00 00] 85 (JumpTT) Jump to Title 23
[00 B1 00 09 00 29 00 58] 86 if ( gprm(9) != 41 ) then { Goto line 88 }
[30 02 00 00 00 18 00 00] 87 (JumpTT) Jump to Title 24
[00 B1 00 09 00 2A 00 5A] 88 if ( gprm(9) != 42 ) then { Goto line 90 }
[30 02 00 00 00 49 00 00] 89 (JumpTT) Jump to Title 73
[00 B1 00 09 00 2B 00 5C] 90 if ( gprm(9) != 43 ) then { Goto line 92 }
[00 00 00 00 00 00 00 00] 91 NOP
[00 B1 00 09 00 2C 00 5E] 92 if ( gprm(9) != 44 ) then { Goto line 94 }
[00 00 00 00 00 00 00 00] 93 NOP
[00 B1 00 09 00 2D 00 60] 94 if ( gprm(9) != 45 ) then { Goto line 96 }
[30 02 00 00 00 2A 00 00] 95 (JumpTT) Jump to Title 42
[00 B1 00 09 00 2E 00 62] 96 if ( gprm(9) != 46 ) then { Goto line 98 }
[30 02 00 00 00 2B 00 00] 97 (JumpTT) Jump to Title 43
[00 B1 00 09 00 2F 00 64] 98 if ( gprm(9) != 47 ) then { Goto line 100 }
[30 02 00 00 00 2C 00 00] 99 (JumpTT) Jump to Title 44
[00 B1 00 09 00 30 00 66] 100 if ( gprm(9) != 48 ) then { Goto line 102 }
[30 02 00 00 00 2D 00 00] 101 (JumpTT) Jump to Title 45
[00 B1 00 09 00 31 00 68] 102 if ( gprm(9) != 49 ) then { Goto line 104 }
[30 02 00 00 00 2E 00 00] 103 (JumpTT) Jump to Title 46
[00 B1 00 09 00 32 00 6A] 104 if ( gprm(9) != 50 ) then { Goto line 106 }
[30 02 00 00 00 2F 00 00] 105 (JumpTT) Jump to Title 47
[20 04 00 00 00 00 00 03] 106 LinkPGCN PGC 3
********** post commands:
********** cell commands:

Hope this helps ...

Grace

blutach

29th August 2008, 05:01

VMGM 5 indicates that given GPRM(9)=3 now, title 3 should play. I guess this is your target VTST 1, 5?

So, your nav starts playback at title 3.

Regards

setarip_old

29th August 2008, 05:03

That does beg the next question though - why did it do that ??because, as "r0lZ" so eloquently stated, All players should behave the same way, but it is well known that the software players have some bugs that could explain the difference.And I would add - Especially regarding player programs that are not specifically fullblown DVD players...

Glad to hear that my simple suggestion allowed you to prove that you had successfully overcome the problem ;>}

grace-wong

29th August 2008, 05:28

Glad to hear that my simple suggestion allowed you to prove that you had successfully overcome the problem ;>}

Believe me - me too ... thanks again, all !! :)

Grace

grace-wong

29th August 2008, 05:37

VMGM 5 indicates that given GPRM(9)=3 now, title 3 should play. I guess this is your target VTST 1, 5?

So, your nav starts playback at title 3.

So, in other words, it *should* be working - but for whatever reason (namely, WMPC), it doesn't want to behave ... however, it works in a standalone player, so I'm good with it ... :)

Grace

blutach

29th August 2008, 06:49

WMP is not known as a good media player. Use Media Player Classic or VLC.

Regards