View Full Version : repair unfinalized dvd-rw
STFU
14th January 2008, 00:32
this is what happend, because I hadn't used new dvd's to record on for a while i tried about 7 dvd's to record on but after recording and shutting down the dvr, it said can't read the dvd. Finally i found out, just popped into my mind I first had to choose the right format(same procedure when you clean the disc) .VR or Video_ts . Every thing fine after that but those 7 dvd's didn't work anymore. I easily got the .VR movies from the discs by closing the disc on dvd decrypter. Now when I put the dvd in my pc, it automatically pops up. However the dvd still can't read it, full erase doesn't help either.
I just want to use the dvd's to record again since they're practacially new. I know stupid me for not chosing format before recording.
THNX in advance
Wombler
14th January 2008, 09:38
I just want to use the dvd's to record again since they're practacially new.
Try using Nero to erase the discs.
If you haven't got Nero installed you can download a free trial from their website.
Wombler
STFU
14th January 2008, 17:44
Try using Nero to erase the discs.
If you haven't got Nero installed you can download a free trial from their website.
Wombler
Doesn't work either that's the program I usually use, I only yesterday tried the full erase from dvd decrypter the dvd just can't read them anymore.
ilovejedd
14th January 2008, 18:06
Have you tried using ImgBurn?
STFU
15th January 2008, 05:15
Have you tried using ImgBurn?
NO, I will now but, I mean full-erase is full-erase right? I mean if you go down that alley i could try dozen of other programs I haven't tried alcohol 120 either btw.
Wombler
16th January 2008, 10:17
Doesn't work either that's the program I usually use, I only yesterday tried the full erase from dvd decrypter the dvd just can't read them anymore.
Apologies for the delay in replying. I've been up to my eyes for the last few days.
ImgBurn should normally do it if Nero fails.
Apparently it is actually possible to trash rewritables permanently.
If the TOC is corrupted in a certain way burning software will be unable to recognise the disc as a rewritable.
From the sound of things though this isn't the case with your own discs.
If possible try different writers with ImgBurn.
NEC drives are particularly good at rejuvenating corrupted discs.
Failing that I'm not sure.
Posting on the ImgBurn forums (http://forum.imgburn.com/)might get a more expert response from LightningUK! (author of ImgBurn).
Wombler
STFU
16th January 2008, 15:02
Apologies for the delay in replying. I've been up to my eyes for the last few days.
ImgBurn should normally do it if Nero fails.
I'll give it a try now but IMG burn is bassicly the succesor of dvdDecrypter, so I think decrypter should have done the trick already. I'll update later it takes about 30 mintes so...
BTW. I forgot to tell that besides that the pc can see the.VRO file, I can also burn a movie on it and watch it in another dvd but the dvd recorder just doesn't read it anymore since I forgot to "finalize" before starting to record.
STFU
20th January 2008, 02:56
sorry it took so long , things kinda hectic here.
Tried IMG Burn, nothing, alson tried DVDinfoPro , which has got a full format option besides the erase options, looked promising to me but after the hout it took, again nothing.
Mind you that both the dvd's are useable when a movie burned onto them as well as the recorder wich still works perfect with discs i treated "the normal way".
Wombler
20th January 2008, 15:33
sorry it took so long , things kinda hectic here.
Tried IMG Burn, nothing, alson tried DVDinfoPro , which has got a full format option besides the erase options, looked promising to me but after the hout it took, again nothing.
Mind you that both the dvd's are useable when a movie burned onto them as well as the recorder wich still works perfect with discs i treated "the normal way".
You wouldn't happen to have Alcohol 120% or Daemon Tools installed by any chance?
Wombler
STFU
27th January 2008, 04:46
You wouldn't happen to have Alcohol 120% or Daemon Tools installed by any chance?
Wombler
Those aren't any different, I might give alocohol another shot but I don't think it gets much better than dvdinfopro, going down this alley I could try antother dozen burn programs.
Wombler
27th January 2008, 16:34
Those aren't any different, I might give alocohol another shot but I don't think it gets much better than dvdinfopro, going down this alley I could try antother dozen burn programs.
That's not why I asked.
Both Alcohol 120% and Daemon Tools have options that prevent the detection of writable media. This blocks recognition of the correct media type and can prevent you from erasing the disc.
Wombler
STFU
1st February 2008, 13:45
That's not why I asked.
Both Alcohol 120% and Daemon Tools have options that prevent the detection of writable media. This blocks recognition of the correct media type and can prevent you from erasing the disc.
Wombler
sorry again for the delayed response, but as you might guess I do have alcohol installed, but like I said after I closed the disc in dvd decrypter, I was able to see the content of the dvd with the pc, of course I didn't anymore after the erase. I get your point though but are you telling me to uninstall alcohol so I can erase a disc that should be blank already cause none of the erases i preformed were aborted,
BTW , thnx for all the help so far
Wombler
1st February 2008, 20:03
sorry again for the delayed response, but as you might guess I do have alcohol installed, but like I said after I closed the disc in dvd decrypter, I was able to see the content of the dvd with the pc, of course I didn't anymore after the erase. I get your point though but are you telling me to uninstall alcohol so I can erase a disc that should be blank already cause none of the erases i preformed were aborted,
BTW , thnx for all the help so far
No problem.
You don't have to uninstall.
Just go to Settings, Emulation, then remove the tick from "Ignore Media Type".
Then try a full erase in ImgBurn.
Wombler
unknownsoldierX
5th February 2008, 02:33
Whenever I have a problems erasing rewritables, I wave it in front of my 15" subwoofer for a minute. Works every time.
I told a friend about it and he got results by waving a disc around his subwoofer, too. Although he had to take the sub out of the box and put the disc closer to the magnet.
I have no idea why it works, but you could try it.
Wombler
6th February 2008, 09:00
Whenever I have a problems erasing rewritables, I wave it in front of my 15" subwoofer for a minute. Works every time.
I told a friend about it and he got results by waving a disc around his subwoofer, too. Although he had to take the sub out of the box and put the disc closer to the magnet.
I have no idea why it works, but you could try it.
LOL that's a new one on me but if it works then I suppose that's all that matters! :)
Wombler
Taurus
6th February 2008, 10:59
Whenever I have a problems erasing rewritables, I wave it in front of my 15" subwoofer for a minute. Works every time.
I told a friend about it and he got results by waving a disc around his subwoofer, too. Although he had to take the sub out of the box and put the disc closer to the magnet.
I have no idea why it works, but you could try it.
Well, it's all about magic and voodoo and some prayers :p
vBulletin® v3.8.11, Copyright ©2000-2026, vBulletin Solutions Inc.