Log in

View Full Version : DVDRB and HCenc 0.22

dialysis1
16th November 2007, 11:36
I'm trying to use the new HC encoder with Rebuilder and I recieve a message that the encoder does not appear functional. Is this a bug or am I missing something? Is there a setting that needs to be changed?

-----------------

[10:56:31] Phase I, PREPARATION started.

- DVD-RB v1.26.5

- AVISYNTH 2.5.6.0

- HC v0.22.0.0 encoder selected

- AVS Filters are enabled.

- "Movie Only" mode is enabled.

- Source: NEXT

- VTS_03: 2,741,451 sectors.

-- Scanning and writing .D2V & .AVS files

-- Processed 138,434 frames.

-- Building .AVS and .ECL files

- Reduction Level for DVD-5: 88.5%

- Overall Bitrate : 7,325/5,860Kbs

- Space for Video : 4,130,070KB

- HIGH/LOW/TYPICAL Bitrates: 7,053/400/5,860 Kbs

[11:01:51] Phase I, PREPARATION completed in 5 minutes.

[11:03:59] Phase II ENCODING started

- Creating M2V for VTS_03 segment 0

-- V03000000001001 no .M2V, retrying.

- Creating M2V for VTS_03 segment 0

-- V03000000001001 no .M2V, retrying.

- Creating M2V for VTS_03 segment 0

- Failed to create M2V: V03000000001001

- The encoder doesn't appear functional.

- Aborting...

[11:12:38] Phase II ENCODING started

- Creating M2V for VTS_03 segment 0

-- V03000000001001 no .M2V, retrying.

- Creating M2V for VTS_03 segment 0

-- V03000000001001 no .M2V, retrying.

- Creating M2V for VTS_03 segment 0

-----------------

[11:15:13] Phase I, PREPARATION started.

- DVD-RB v1.26.5

- AVISYNTH 2.5.6.0

- HC v0.22.0.0 encoder selected

- "Movie Only" mode is enabled.

- Source: NEXT

- VTS_03: 2,741,451 sectors.

-- Scanning and writing .D2V & .AVS files

-- Processed 138,434 frames.

-- Building .AVS and .ECL files

- Reduction Level for DVD-5: 88.5%

- Overall Bitrate : 7,325/5,860Kbs

- Space for Video : 4,130,070KB

- HIGH/LOW/TYPICAL Bitrates: 7,053/400/5,860 Kbs

[11:20:17] Phase I, PREPARATION completed in 5 minutes.

[11:23:33] Phase II ENCODING started

- Creating M2V for VTS_03 segment 0

-- V03000000001001 no .M2V, retrying.

- Creating M2V for VTS_03 segment 0

-- V03000000001001 no .M2V, retrying.

- Creating M2V for VTS_03 segment 0

-----------------

[11:30:21] Phase I, PREPARATION started.

- DVD-RB v1.26.5

- AVISYNTH 2.5.6.0

- HC v0.21.0.0 encoder selected

- "Movie Only" mode is enabled.

- Source: NEXT

- VTS_03: 2,741,451 sectors.

-- Scanning and writing .D2V & .AVS files

-- Processed 138,434 frames.

-- Building .AVS and .ECL files

- Reduction Level for DVD-5: 88.5%

- Overall Bitrate : 7,325/5,860Kbs

- Space for Video : 4,130,070KB

- HIGH/LOW/TYPICAL Bitrates: 7,053/400/5,860 Kbs

[11:35:34] Phase I, PREPARATION completed in 5 minutes.

[11:35:39] Phase II ENCODING started

- Creating M2V for VTS_03 segment 0

- Creating M2V for VTS_03 segment 1

- Creating M2V for VTS_03 segment 2

- Creating M2V for VTS_03 segment 3

- Creating M2V for VTS_03 segment 4

- Creating M2V for VTS_03 segment 5

- Creating M2V for VTS_03 segment 6

- Creating M2V for VTS_03 segment 7

- Creating M2V for VTS_03 segment 8

- Creating M2V for VTS_03 segment 9

- Creating M2V for VTS_03 segment 10

- Creating M2V for VTS_03 segment 11

- Creating M2V for VTS_03 segment 12

- Creating M2V for VTS_03 segment 13

- Creating M2V for VTS_03 segment 14

- Creating M2V for VTS_03 segment 15

- Creating M2V for VTS_03 segment 16

- Creating M2V for VTS_03 segment 17

- Creating M2V for VTS_03 segment 18

- Creating M2V for VTS_03 segment 19

- Creating M2V for VTS_03 segment 20

- Creating M2V for VTS_03 segment 21

It works fine with 0.21 but not with 0.22.
Fishman0919
16th November 2007, 11:51
Works fine here.

You are pointing at the HCenc_022.exe file and not HCgui_022.exe... right?
dialysis1
16th November 2007, 11:57
Right.
sillKotscha
16th November 2007, 13:02
you are pointing at the HCenc_022.exe

or rename HCenc_022.exe to HCbatch.exe and copy the renamed exe into the HC Encoder folder of DVD RB/ replace the exisiting one...
blutach
16th November 2007, 13:13
Yes, rename it to HCbatch.exe as sillKotscha says.

No problems here and I like the fact that it uses all resources, even if only one encoder instance is running.

Big thumbs up to Hank (as usual).

Regards
dialysis1
16th November 2007, 13:14
That's what I always do. Just can't get it working. Thought it was a bad download so I downloaded it again. Still no luck. The encoder says error loading Avistnth script. I'm using version 2.5.6.0.
blutach
16th November 2007, 13:16
Must be something with your setup then.

Regards
dialysis1
16th November 2007, 13:26
When I put the older version back, it works fine. I'll keep trying.
urvieh
16th November 2007, 13:33
FWIW, it's working here. Check the AVS options (ConvertToYUY2()). What AVISynth version are you running?
dialysis1
16th November 2007, 14:17
I've tried a number of things and still no go.
SpazzHH
16th November 2007, 15:11
Have you tried it on another source? Have you checked to see if you can play the .avs with a media player?
manolito
16th November 2007, 15:29
I'm using version 2.5.6.0.
In the HC thread I remember seeing a post according to which HC 0.22 does not work with AviSynth 2.26. Upgrading to AviSynth 2.57 solved the problem.

Cheers
manolito
SpazzHH
16th November 2007, 15:31
In the HC thread I remember seeing a post according to which HC 0.22 does not work with AviSynth 2.26. Upgrading to AviSynth 2.57 solved the problem.

Cheers
manolito

I'm sure that would be worth a try, but I'm having no problems with 2.56 here.
dialysis1
16th November 2007, 18:00
In the HC thread I remember seeing a post according to which HC 0.22 does not work with AviSynth 2.26. Upgrading to AviSynth 2.57 solved the problem.

Cheers
manolito

I'll give that a try, thanks.
dialysis1
16th November 2007, 18:14
That did it!
Thank you manolito!