Log in

View Full Version : Casino Royale audio sync issue

calpchen
26th March 2007, 13:07
I did a search but didn't come up with anything helpful.

I re-encoded Casino Royale (Region 1) with DVD Rebuilder 1.23.2 and AnyDVD 6.1.3.3. The output was for both DVD-5 and "mobile". Unfortunately, the audio lags the video by a split second, but it's definately noticeable.

Has anybody else noticed this?

AnyDVD was not set to jump straight to the menu or movie. It was only set to limit the drive speed to "medium".

- Versions :
-- Rebuilder: v1.23.2
-- CCE Basic Version: 2.70.1.10
-- DGDECODE Version: 1.4.5
-- AVISYNTH: 2.5.6.0

[01:48:01] One Click encoding activated...
-----------------
[01:48:34] Phase I, PREPARATION started.
- DVD-RB v1.23.2
- AVISYNTH 2.5.6.0
- CCE 2.70.1.10 encoder selected.
- "Movie and Menus Only" mode is enabled.
- Output in DVD and MOBILE formats.
- Audiostream (for mobile) is 0x80
- Source: CASINO ROYALE
- VTS_01: 3,499,053 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 207,666 frames.
-- Building .AVS and .ECL files
- VTS_02: 51,061 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,575 frames.
-- Building .AVS and .ECL files
- VTS_03: 48,314 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,380 frames.
-- Building .AVS and .ECL files
- VTS_04: 50,675 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,515 frames.
-- Building .AVS and .ECL files
- VTS_05: 4,975 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 357 frames.
-- Building .AVS and .ECL files
- VTS_06: 5,434 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 285 frames.
-- Building .AVS and .ECL files
- VTS_07: 3,949 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 474 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 62.9%
- Overall Bitrate : 4,160/3,328Kbs
- Space for Video : 3,766,054KB
- Blanking all EXTRA Segments
-- Feature before/after: 3,381 / 3,584 Kbs
[02:14:02] Phase I, PREPARATION completed in 26 minutes.
[02:14:02] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Extracting Video for VTS_01 segment 29
- Extracting Video for VTS_01 segment 30
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
- Creating M2V for VTS_03 segment 0
- Creating M2V for VTS_03 segment 1
- Creating M2V for VTS_04 segment 0
- Creating M2V for VTS_04 segment 1
- Creating M2V for VTS_05 segment 0
- Creating M2V for VTS_05 segment 1
- Creating M2V for VTS_06 segment 0
- Creating M2V for VTS_06 segment 1
- Creating M2V for VTS_07 segment 0
- MOBILE Encoding:
- Video: MPEG4 (640x360) 704Kbs
- Audio: AAC 96Kbs
- Encoding: VTS01_PGC_00001.AVS
[05:20:33] Phase II ENCODING completed in 186 minutes.
[05:20:34] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 2 CELLID 29
- Rebuilding seg 1 VOBID 2 CELLID 30
- Rebuilding seg 2 VOBID 2 CELLID 31
- Rebuilding seg 3 VOBID 2 CELLID 32
- Rebuilding seg 4 VOBID 2 CELLID 33
- Rebuilding seg 5 VOBID 2 CELLID 34
- Rebuilding seg 6 VOBID 2 CELLID 35
- Rebuilding seg 7 VOBID 2 CELLID 36
- Rebuilding seg 8 VOBID 2 CELLID 37
- Rebuilding seg 9 VOBID 2 CELLID 38
- Rebuilding seg 10 VOBID 2 CELLID 39
- Rebuilding seg 11 VOBID 2 CELLID 40
- Rebuilding seg 12 VOBID 2 CELLID 41
- Rebuilding seg 13 VOBID 2 CELLID 42
- Rebuilding seg 14 VOBID 2 CELLID 43
- Rebuilding seg 15 VOBID 2 CELLID 44
- Rebuilding seg 16 VOBID 2 CELLID 45
- Rebuilding seg 17 VOBID 2 CELLID 46
- Rebuilding seg 18 VOBID 2 CELLID 47
- Rebuilding seg 19 VOBID 2 CELLID 48
- Rebuilding seg 20 VOBID 2 CELLID 49
- Rebuilding seg 21 VOBID 2 CELLID 50
- Rebuilding seg 22 VOBID 2 CELLID 51
- Rebuilding seg 23 VOBID 2 CELLID 52
- Rebuilding seg 24 VOBID 2 CELLID 53
- Rebuilding seg 25 VOBID 2 CELLID 54
- Rebuilding seg 26 VOBID 2 CELLID 55
- Rebuilding seg 27 VOBID 2 CELLID 56
- Rebuilding seg 28 VOBID 2 CELLID 57
- Rebuilding seg 29 VOBID 2 CELLID 58
- Rebuilding seg 30 VOBID 2 CELLID 59
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_02
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_02_0.IFO
- Updating TMAP table...
- Processing VTS_03
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_03_0.IFO
- Updating TMAP table...
- Processing VTS_04
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_04_0.IFO
- Updating TMAP table...
- Processing VTS_05
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_05_0.IFO
- Updating TMAP table...
- Processing VTS_06
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_06_0.IFO
- Updating TMAP table...
- Processing VTS_07
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_07_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
- Building ISO Image...
- Removing DVD files
- ISO Image successfully created.
[05:54:12] Phase III, REBUILD completed in 34 minutes.

Done.
[05:54:12] PREPARE/ENCODE/REBUILD completed in 246 min.
blutach
26th March 2007, 13:34
You should remove the tiny cells at the beginning of the title, or rip with RipIt4Me (in movie only mode). There's an explanation about audio sync issues and the issues that DGIndex has with them in the RipIt4Me help file (section 3.2.1).

Regards
Fishman0919
26th March 2007, 13:56
I did a search but didn't come up with anything helpful.

I re-encoded Casino Royale (Region 1) with DVD Rebuilder 1.23.2 and AnyDVD 6.1.3.3. The output was for both DVD-5 and "mobile". Unfortunately, the audio lags the video by a split second, but it's definately noticeable.

Has anybody else noticed this?

AnyDVD was not set to jump straight to the menu or movie. It was only set to limit the drive speed to "medium".


AnyDVD doesn't seem to handle this movie correct. I had the same problem with that movie and AnyDVD.... like blutach said, I rip it with RipIt4Me and it worked fine. I ripped it with RipIt4Me 1.7.1.0 beta ripped the whole disc and opened RipIt4Me first before putting the disc in the driver. I did both a Full Disc backup with DVD-RB 1.23.1 and Movie Only... both worked fine
jdobbs
26th March 2007, 16:43
Does the audio lag on both the feature and the MOBILE output, or just the MOBILE? I did a backup of "Casino Royale, R1, NTSC" (ripped with AnyDVD in ISO mode) with no issues, but haven't tried MOBILE.
calpchen
26th March 2007, 17:10
Does the audio lag on both the feature and the MOBILE output, or just the MOBILE?

Yup. It's the same on both.

I used AnyDVD, but I did not rip the DVD first. Instead, DVD Rebuilder worked with the files on the DVD through AnyDVD on-the-fly.
jdobbs
26th March 2007, 17:16
What region/format was it?
calpchen
26th March 2007, 17:19
Region 1 (as specified in my original post :) ) and NTSC.

Purchased here (http://www.amazon.com/gp/product/B000MNP2KI/).
jdobbs
26th March 2007, 19:25
Hmmm.... that's the same one I did. :confused:
calpchen
26th March 2007, 19:29
Maybe you used an earlier version of AnyDVD? Maybe there's a difference when ripped to hard disk first instead of being on-the-fly?

In any case, I'm going to try another run tonight except this time, I'll rip it to hard disk first using RipIt4Me (or AnyDVD itself).
gizzin
26th March 2007, 21:38
I have the same problem with L.A. Confidential SE R1. Don't know why but the audio out of sync slightly very slighty.
calpchen
27th March 2007, 01:08
Hmmm.... that's the same one I did. :confused:

Oh, and something else occurred to me... Did you do a Movie-only or a Movie-and-Menus backup? I did the latter.
jdobbs
27th March 2007, 03:26
That really should have no effect at all. The extras are not in the same VTS as the feature.
laserfan
27th March 2007, 15:30
Just checking: the audiosync problem is in playback of the converted-and-burned DVD? Or are you using a PC player software to playback the VIDEO_TS from your hard drive?

My player software isn't perfect, but burns always are (and my backup of CR is great as well).
calpchen
29th March 2007, 05:35
So I ripped with RipIt4Me (Full DVD) into a folder, then used that as the source for DVD Rebuilder. The DVD5 came out perfect (movie and menus only). However, the mobile version had audio that lagged behind the video by about 1 minute 30 seconds. Weird.

[07:33:05] One Click encoding activated...
-----------------
[07:33:06] Phase I, PREPARATION started.
- DVD-RB v1.23.2
- AVISYNTH 2.5.6.0
- CCE 2.70.1.10 encoder selected.
- "Movie and Menus Only" mode is enabled.
- Output in DVD and MOBILE formats.
- Audiostream (for mobile) is 0x80
- Source: CASINO_ROYALE
- VTS_01: 3,449,647 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 207,575 frames.
-- Building .AVS and .ECL files
- VTS_02: 51,061 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,575 frames.
-- Building .AVS and .ECL files
- VTS_03: 48,314 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,380 frames.
-- Building .AVS and .ECL files
- VTS_04: 50,675 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,515 frames.
-- Building .AVS and .ECL files
- VTS_05: 4,975 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 357 frames.
-- Building .AVS and .ECL files
- VTS_06: 5,434 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 285 frames.
-- Building .AVS and .ECL files
- VTS_07: 3,949 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 474 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 62.9%
- Overall Bitrate : 4,163/3,330Kbs
- Space for Video : 3,767,060KB
- Blanking all EXTRA Segments
-- Feature before/after: 3,382 / 3,585 Kbs
[07:37:36] Phase I, PREPARATION completed in 4 minutes.
[07:37:36] Phase II ENCODING started
- Extracting Video for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Extracting Video for VTS_01 segment 30
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
- Creating M2V for VTS_03 segment 0
- Creating M2V for VTS_03 segment 1
- Creating M2V for VTS_04 segment 0
- Creating M2V for VTS_04 segment 1
- Creating M2V for VTS_05 segment 0
- Creating M2V for VTS_05 segment 1
- Creating M2V for VTS_06 segment 0
- Creating M2V for VTS_06 segment 1
- Creating M2V for VTS_07 segment 0
- MOBILE Encoding:
- Video: MPEG4 (640x360) 704Kbs
- Audio: AAC 96Kbs
- Encoding: VTS01_PGC_00001.AVS
[10:47:06] Phase II ENCODING completed in 190 minutes.
[10:47:06] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Rebuilding seg 2 VOBID 2 CELLID 2
- Rebuilding seg 3 VOBID 2 CELLID 3
- Rebuilding seg 4 VOBID 2 CELLID 4
- Rebuilding seg 5 VOBID 2 CELLID 5
- Rebuilding seg 6 VOBID 2 CELLID 6
- Rebuilding seg 7 VOBID 2 CELLID 7
- Rebuilding seg 8 VOBID 2 CELLID 8
- Rebuilding seg 9 VOBID 2 CELLID 9
- Rebuilding seg 10 VOBID 2 CELLID 10
- Rebuilding seg 11 VOBID 2 CELLID 11
- Rebuilding seg 12 VOBID 2 CELLID 12
- Rebuilding seg 13 VOBID 2 CELLID 13
- Rebuilding seg 14 VOBID 2 CELLID 14
- Rebuilding seg 15 VOBID 2 CELLID 15
- Rebuilding seg 16 VOBID 2 CELLID 16
- Rebuilding seg 17 VOBID 2 CELLID 17
- Rebuilding seg 18 VOBID 2 CELLID 18
- Rebuilding seg 19 VOBID 2 CELLID 19
- Rebuilding seg 20 VOBID 2 CELLID 20
- Rebuilding seg 21 VOBID 2 CELLID 21
- Rebuilding seg 22 VOBID 2 CELLID 22
- Rebuilding seg 23 VOBID 2 CELLID 23
- Rebuilding seg 24 VOBID 2 CELLID 24
- Rebuilding seg 25 VOBID 2 CELLID 25
- Rebuilding seg 26 VOBID 2 CELLID 26
- Rebuilding seg 27 VOBID 2 CELLID 27
- Rebuilding seg 28 VOBID 2 CELLID 28
- Rebuilding seg 29 VOBID 2 CELLID 29
- Rebuilding seg 30 VOBID 2 CELLID 30
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_02
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_02_0.IFO
- Updating TMAP table...
- Processing VTS_03
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_03_0.IFO
- Updating TMAP table...
- Processing VTS_04
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_04_0.IFO
- Updating TMAP table...
- Processing VTS_05
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_05_0.IFO
- Updating TMAP table...
- Processing VTS_06
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_06_0.IFO
- Updating TMAP table...
- Processing VTS_07
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_07_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
- Building ISO Image...
- Removing DVD files
- ISO Image successfully created.
[11:05:03] Phase III, REBUILD completed in 18 minutes.

Done.
[11:05:03] PREPARE/ENCODE/REBUILD completed in 212 min.
therat
29th March 2007, 09:56
So I ripped with RipIt4Me (Full DVD) into a folder, then used that as the source for DVD Rebuilder. The DVD5 came out perfect (movie and menus only). However, the mobile version had audio that lagged behind the video by about 1 minute 30 seconds. Weird.



what DGDECODE are you using?
Fishman0919
29th March 2007, 12:42
So I ripped with RipIt4Me (Full DVD) into a folder, then used that as the source for DVD Rebuilder. The DVD5 came out perfect (movie and menus only). However, the mobile version had audio that lagged behind the video by about 1 minute 30 seconds. Weird.

Like therat said, what DGDecode.dll ver are you using?... make sure you are using the ver that came with DVD-RB (DGDecode.dll v1.4.5) and not DGDecode.dll v1.1.0/1 by NaN... it doesn't work with mobile encodings.
calpchen
30th March 2007, 04:52
I'm using DGDecode 1.4.5. I don't think I did anything funny with the DLLs. You can see all my versions in the original post.

Those of you that encoded it successfully, what settings did you use?

AnyDVD (Skip to menu?), RipIt4Me (full, movie only, movie + menus)?
DVD Rebuilder: Movie only, movie + menus, full?
DVD Rebuilder: DVD5 & Mobile, DVD5 only, Mobile only?
blutach
30th March 2007, 14:02
Please see post 2. You need to remove the tinys.

Regards