AACS Keys - A program revealing all AACS Keys needed to decrypt (HD DVD and Blu-ray)

[KenD00]

Thanks :).

The situation is still unchanged, MKB up to version 7, Volume Id / Binding Nonce retrieval up to version 1 :(. Oh, if you can't get the Binding Nonce, google for dumpbn, this is based on DumpVID and does the same but for Binding Nonces.

:rolleyes:

[KenD00]

This post contains a link which will always point to the latest aacskeys version.

Current version: 0.4.0c, released: 2009-08-30

Download links (http://forum.doom9.org/showthread.php?p=1320065#post1320065)

:rolleyes:

[CiNcH]

The situation is still unchanged, MKB up to version 7, Volume Id / Binding Nonce retrieval up to version 1

May I ask which are the latest versions that can be found on BD nowadays?

BTW, I could not find anything about dumpbn.

[KenD00]

In the Slysoft forum there are reports about MKBv10.

You are right, google doesn't give anything useful about DumpBN, it's included in BackupBDAV, i have added download links for it (and DumpVID) in the upper release post.

:rolleyes:

[TomZ]

[...]
If none of the automatic modes to retrieve the Volume ID / Binding Nonce works for you, try the following utilities to sniff them from the bus (works only under Windows and requires a licensed software player):


I'm sorry to tell you that but you're almost wrong KenD00. You can use DumpVID under linux with wine and it works. OK, it's not a native way under linux but it's the trick.
What i do is launching dumpVID.exe with wine, access the BRD with aackeys and the VID appears on the dumpVID console. Then you can re-use aacskey program or DumpHD...

Cheers

PS : thx a lot for your crazy work...

[KenD00]

Well, partially you are right, i have never tried to run it under wine, so that does work, thanks for the info.

But you are using a patched drive, so you can retrieve the Volume ID in a "not official" way, but this isn't the purpose of DumpVID. DumpVID is for the case where you can't get the Volume ID, this is for all drives which are > MKBv1 and are not patched. In that case you need a licensed software player, and, correct me if im wrong, i don't know of any licensed software player that runs under linux (native or under wine).

:rolleyes:

[XAvAX]

Hi, here's a compile fix for Gentoo:

in libaacskeys.make, there needs to be a substitution.

/usr/lib/jvm/java-6-sun/include/
must be replaced with
/etc/java-config-2/current-system-vm/include/ , and

/usr/lib/jvm/java-6-sun/include/linux/
must be replaced with
/etc/java-config-2/current-system-vm/include/linux/ as well

The best way to check if the host distribution is Gentoo is by checking for the file:
/etc/gentoo-release

[TomZ]

But you are using a patched drive, so you can retrieve the Volume ID in a "not official" way, but this isn't the purpose of DumpVID. DumpVID is for the case where you can't get the Volume ID, this is for all drives which are > MKBv1 and are not patched. In that case you need a licensed software player, and, correct me if im wrong, i don't know of any licensed software player that runs under linux (native or under wine).

:rolleyes:

You're right... and you're wrong :p
You're right whent you say i don't need dumpVID as my drive is patched. But you're wrong when you say you need a commercial software. Here is the way to retrieve the VUK :

- you lanch dumpVID.exe with wine, something like that :

# wine dumpVID.exe d:

- in another console, you launch aacskeys

# aacskeys -v /media/bluray

- immediately, dumpVID will give you the VID
- then, you launch again aacskeys with the VID to get the VUK :

# aacskeys -v /media/bluray <VID>

and aacskeys will now give you the VUK !

'Z

[Oopho2ei]

That's correct but aacskeys displays the volume id. So why would you need to run dumpVID.exe in the background?

[TomZ]

If your drive is not "firmware patched" i think aacskeys doesn't display the vid, am i wrong ?
I'm not at home at the moment but i'll check all of that this evening. All i can remember is before patching my drive i had to use dumpVID to get the VUK with aacskeys.

[kkloster21]

i'm trying your approach of running dumpVID in the background and when i try to access the disc with aacskeys, nothing comes out of dumpVID. no VID or anything. it still just says: "Hammering drive..." I tried several different delay times (like 50, 120, 130, 150, 200). aacskeys is not outputting VID either.

this is without patching my drive.

any advice on what to try?

thanks!

[TomZ]

I'll check that this evening and give you a feedback.

[TomZ]

So... I've tried and dumpvid give me the VID when i launch aacskeys. OK, as my LG drive is patched, it's not necessary but the test is ok.

The test is done with BRD Ratatouille, french version.

I launch dumpvid with wine, press ENTER to start hammering. Then i execute aacskeys from another console

vdr@vdrbox:~/DumpHD/aacskeys-0.3.1$ ./bin/linux64/aacskeys -v /media/cdrom0

and :


vdr@vdrbox:~/DumpHD$ wine dumpvid.exe d
DumpVID 0.3 by KenD00 (adapted for bluray testing)

Drive type is recognised as CDROM/DVD.

Sending SPC1 Test Unit CDB6 command..done.
Returned good status.

Press ENTER to start hammering

Hammering drive...
vid: 525F758BFA0C85E8CA4B1E9C9EBD6BF3
Hammering finished.


then :


vdr@vdrbox:~/DumpHD/aacskeys-0.3.1$ ./bin/linux64/aacskeys -v /media/cdrom0 525F758BFA0C85E8CA4B1E9C9EBD6BF3
aacskeys 0.3.1

Current path: /home/vdr/DumpHD/aacskeys-0.3.1

MKBv: 4
Processing key: F190A1E8178D80643494394F8031D9C8
Encrypted C-value: 788A172D47C66A408D7D33F90D2D8521
Corresponding uv: 000000A0

Decrypted C-value: A775A8BD00D800A996560EF6274A5F6C
Media key: A775A8BD00D800A996560EF6274A5FCC

Encrypted verification data: BB25974BA81A2AF7644FAB5FB4668DEC
Decr verif data should be: 0123456789ABCDEF
Decrypted verification data: 0123456789ABCDEF16548E579D21D229

Volume ID (EXTERNAL): 525F758BFA0C85E8CA4B1E9C9EBD6BF3
Volume Unique Key: 67E82C738B3634E52AB8A0A7210F8524
Unit Key File Hash (DiscID): 1348C907340CA8E669F6163CFA7FF795A3DEAB4A
Encrypted Unit Key 1: 998617393B37479AA6F72F1E789732DB

Decrypted Unit Key 1: FC5DFA6B3813352E64ADB703549FB7E9


Just add a line to the KEYDB.cfg (dumpHD) :


1348C907340CA8E669F6163CFA7FF795A3DEAB4A = Ratatouille PAL fr | D | 2007-11-09 | V | 67E82C738B3634E52AB8A0A7210F8524



This should work for you.

But don't remember, if you can patch the firmware of your drive, it's a better solution !

[KenD00]

@XAvAX:
Thanks for the info. However, i don't know how to write a sophisticated configure script to detect everything that aacskeys needs to build properly so i can't do anything about it. For that reason i defined some variables at the beginning of the PreMake script so that everyone can make the necessary adjustments easily.

and you're wrong :p

No, i'm not. DumpVID does nothing more than sending Volume ID requests to the drive, because your drive is patched it will answer them and give you the Volume ID. This even works without running aacskeys, just start DumpVID and after a couple of seconds it will give you the Volume ID (the delay is there because DumpVID doesn't "initialize" the crypto stuff inside the drive)!

i'm trying your approach of running dumpVID in the background and when i try to access the disc with aacskeys, nothing comes out of dumpVID.

If there is no patch for your drive you currently can't do anything else than using a certified (windows) software player with DumpVID to get the Volume ID.

:rolleyes:

[kkloster21]

@KenD00:

there is a patch for my drive, i just can't get it to work on linux. but TomZ did so i'm hoping i can make it work.

@TomZ:

I can't get dumpVID to spit out the VID, i think because my host cert has been revoked on my drive. i think the only thing (or maybe just the best thing) i can do now is to patch the drive. is it a problem (for the patch) that i'm running 64-bit linux? it seems like it shouldn't matter...

[derbeDeus]

I can't get dumpVID to spit out the VID, i think because my host cert has been revoked on my drive.

That's not the reason you cannot get the VID. Just as KenD000 told you, dumpVID is not sending a certificate nor it does the auth necessary to get the VID in the official way. You need the drive to be patched or a windows player.

otoh, aacskeys does the auth with an old certificate. If that does not work, it is indeed because that certificate was revoked by your drive with the help of some new movies you played ;) Just remember, new movies revoke old certificates.

[R!tman]

I have problem compiling aacskeys-0.3.5 on Gentoo Linux for amd64.
$ make
==== Building aacskeys ====
aacs_aes.cpp
aacs_ecdsa.cpp
aacskeys.cpp
cmac.cpp
cmac_aes.cpp
ioctl.cpp
src/ioctl.cpp: In constructor ‘Drive::Drive()’:
src/ioctl.cpp:12: warning: converting to non-pointer type ‘int’ from NULL
mmc.cpp
Linking aacskeys
==== Building libaacskeys ====
aacs_aes.cpp
aacs_ecdsa.cpp
aacskeys.cpp
In file included from src/aacskeys.cpp:33:
src/aacskeys.h:8:17: warning: jni.h: No such file or directory
src/aacskeys.h:19: error: ‘JNIEXPORT’ does not name a type
src/aacskeys.h:27: error: expected constructor, destructor, or type conversion before ‘void’
src/aacskeys.cpp:197: error: expected constructor, destructor, or type conversion before ‘*’ token
src/aacskeys.cpp:198: error: expected constructor, destructor, or type conversion before ‘*’ token
src/aacskeys.cpp:199: error: expected constructor, destructor, or type conversion before ‘*’ token
src/aacskeys.cpp:200: error: expected constructor, destructor, or type conversion before ‘*’ token
src/aacskeys.cpp:201: error: expected constructor, destructor, or type conversion before ‘*’ token
src/aacskeys.cpp:202: error: expected constructor, destructor, or type conversion before ‘*’ token
src/aacskeys.cpp: In function ‘int main(int, char**)’:
src/aacskeys.cpp:1722: error: ‘globalSetVuk’ was not declared in this scope
src/aacskeys.cpp:1724: error: ‘jbyteArray’ was not declared in this scope
src/aacskeys.cpp:1724: error: expected `;' before ‘jvuk’
src/aacskeys.cpp:1725: error: ‘jvuk’ was not declared in this scope
src/aacskeys.cpp:1730: error: ‘globalEnv’ was not declared in this scope
src/aacskeys.cpp:1730: error: expected type-specifier before ‘jbyte’
src/aacskeys.cpp:1730: error: expected `>' before ‘jbyte’
src/aacskeys.cpp:1730: error: expected `(' before ‘jbyte’
src/aacskeys.cpp:1730: error: ‘jbyte’ was not declared in this scope
src/aacskeys.cpp:1730: error: expected primary-expression before ‘>’ token
src/aacskeys.cpp:1733: error: ‘globalKeyData’ was not declared in this scope
src/aacskeys.cpp:1878: error: ‘globalEnv’ was not declared in this scope
src/aacskeys.cpp:1878: error: ‘globalAacsException’ was not declared in this scope
src/aacskeys.cpp: In function ‘int printfj(const char*, ...)’:
src/aacskeys.cpp:1910: error: ‘globalEnv’ was not declared in this scope
src/aacskeys.cpp:1910: error: ‘globalMessagePrinter’ was not declared in this scope
src/aacskeys.cpp:1910: error: ‘globalPrint’ was not declared in this scope
src/aacskeys.cpp: At global scope:
src/aacskeys.cpp:1919: error: ‘JNIEXPORT’ does not name a type
src/aacskeys.cpp:1930: error: expected constructor, destructor, or type conversion before ‘void’
make[1]: *** [obj/linux/ReleaseLib/aacskeys.o] Error 1
make: *** [libaacskeys] Error 2
I know there's a binary included with the package, but I couldn't get that to work either.
./bin/linux64/aacskeys: /usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by ./bin/linux64/aacskeys)
Any ideas how to resolve that problem?

[Oopho2ei]

Those are the debian packages which provide "jni.h"
# apt-file search jni.h
classpath-common: /usr/include/classpath/jni.h
iceape-dev: /usr/include/iceape/java/jni.h
iceape-dev: /usr/include/iceape/jni.h
icedove-dev: /usr/include/icedove/java/jni.h
icedove-dev: /usr/include/icedove/jni.h
iceowl-dev: /usr/include/iceowl/java/jni.h
iceowl-dev: /usr/include/iceowl/jni.h
java-gcj-compat-dev: /usr/lib/jvm/java-1.4.2-gcj-4.1-1.4.2.0/include/jni.h
java-gcj-compat-dev: /usr/lib/jvm/java-1.5.0-gcj-4.3-1.5.0.0/include/jni.h
kaffe-dev: /usr/lib/kaffe/include/jni.h
kaffe-dev: /usr/lib/kaffe/include/kaffe_jni.h
libgcj7-dev: /usr/lib/gcc/x86_64-linux-gnu/4.1.2/include/jni.h
libgcj8-dev: /usr/lib/gcc/x86_64-linux-gnu/4.2/include/jni.h
libgcj9-dev: /usr/lib/gcc/x86_64-linux-gnu/4.3/include/jni.h
libsablevm-classlib1-java: /usr/include/jni.h
libsablevm-native1: /usr/include/jni.h
libsablevm1-dev: /usr/include/sablevm/jni.h
libxul-dev: /usr/include/xulrunner/java/jni.h
libxul-dev: /usr/include/xulrunner/jni.h
libxul-dev: /usr/lib/xulrunner/sdk/include/jni.h
sun-java5-jdk: /usr/lib/jvm/java-1.5.0-sun-1.5.0.14/include/jni.h
sun-java6-jdk: /usr/lib/jvm/java-6-sun-1.6.0.06/include/jni.h
As you can see they are all java related. So try some java (development) packages of you distribution. The other library is in package "libstdc++6". I hope the package names are somewhat similar to those in gentoo.

[XAvAX]

Ritman:
Please see http://forum.doom9.org/showthread.php?p=1189555#post1189555

Also, the GLIBCXX error is caused (I believe) by a GCC downgrade from 4.2.X or 4.3.X, which was used to build it, to 4.1.2, which you have

[R!tman]

XAvAX: Thanks a ton, that work! I could compile it :-)!

[odin24]

I just need some clarification on how this works. I am able to get from a disc the;
-VID with DumpVid
-VUK with aacskeys, also the Disc ID

No what do I do with these numbers? I used Blu ray disc ripper, using the VUK as the CPS Key (are they the same?)... which did not work. The only think I can think as to why is the source was an unencrypted BD rip on my HDD. Does the source have to be the actual disc in the BD drive, or can it be hard drive files, or an image mounted to a virtual drive.

Also, my drive has had it's firmware patched, and no media player software was used during this whole process.

Thanks.

[derbeDeus]

I just need some clarification on how this works. I am able to get from a disc the;
-VID with DumpVid
-VUK with aacskeys, also the Disc ID

No what do I do with these numbers? I used Blu ray disc ripper, using the VUK as the CPS Key (are they the same?)... which did not work. The only think I can think as to why is the source was an unencrypted BD rip on my HDD. Does the source have to be the actual disc in the BD drive, or can it be hard drive files, or an image mounted to a virtual drive.

Also, my drive has had it's firmware patched, and no media player software was used during this whole process.

Thanks.

no, VUK is not CPS
CPS is called "Decrypted Unit Key 1" in aacskeys output

[odin24]

no, VUK is not CPS
CPS is called "Decrypted Unit Key 1" in aacskeys output


Many thanks. :)

[KenD00]

The only think I can think as to why is the source was an unencrypted BD rip on my HDD.

Uhh, if your source is already decrypted, why do you want to decrypt it again :confused:. I don't know what Blu-Ray Disc Ripper does in that case, but DumpHD shouldn't decrypt the files a second time.


Does the source have to be the actual disc in the BD drive, or can it be hard drive files, or an image mounted to a virtual drive.

Again i can only speak for DumpHD, if you have the VUK of that disc in the database it works all these times if you have all files from the disc present (including the AACS stuff). If you don't have the VUK, you need the original disc because the VID needs to be retrieved which isn't stored in the filesystem.


Also, my drive has had it's firmware patched

Then you don't need DumpVID because aacskeys can do all the work for you.

:rolleyes:

[odin24]

Then you don't need DumpVID because aacskeys can do all the work for you.

:rolleyes:

Right on, I did not know that... obviously.


Thanks, O.

[Guest]

Right on, I did not know that... obviously.

One other thing. Is there a way to decrypt an encrypted file that is in either .iso, or BD structure on my PC's HDD?

At the time of ripping I was unsure of this whole process... and my rental was due back. :p
Guys, don't answer this as it is a rule 6 violation.

[odin24]

Guys, don't answer this as it is a rule 6 violation.

Sorry 'bout that.

[Guilllo]

Here is what happens event with dumpvid hammering :

aacskeys 0.3.5 by arnezami, KenD00

Current path: /home/guilo/dumphd-0.46

MKBv: 4
Processing key: F190A1E8178D80643494394F8031D9C8
Encrypted C-value: 788D0BF2BAA6BCF88D545D6DE2E32FDC
Corresponding uv: 000000A0

Decrypted C-value: 8DC7B0E517FE1F513758C9E11D3E9AEC
Media key: 8DC7B0E517FE1F513758C9E11D3E9A4C

Encrypted verification data: 9AA5318EC0A587729C080AC0525235D4
Decr verif data should be: 0123456789ABCDEF
Decrypted verification data: 0123456789ABCDEF571A4CF3666E53C3

Drive FW info: 1.79 Oct24,2007
AACS Version: 01
Number of concurrent AGIDs: 4
Supports BN generation: YES
BN Block Count: 1
Inserted medium AACS protected: YES

AGID: 00

Host Private Key (Hpriv): 4737676058D7029452514F0AB186DC4CCA8C578F
Host certificate (Hcert): 0200005CFFFF0000000C00006E3DEB679B9A16AD
FAA8E30878767BA6EB2A9B415385AD1181B4446C
31E9A5DD2AB808B364FF15885BAC490964318C9B
F8029FCF76F688A54FBDA03F6D9332EF04E5A613
12DA85880A4D9CBB79D8602E
Host Nonce (Hn): 2923BE84E16CD6AE529049F1F1BBE9EBB3A6DB3C

AGID: 00

The given Host Certficate / Private Key has been revoked by your drive.


ERROR: SENDHOSTCHAL: SK: 0x1, ASC: 0x00, ASCQ: 0x00, errnr: -2


I am using aackeys 0.3.5 on linux64.

[kkloster21]

you need to patch your BD-ROM drive firmware. Oopho2ei and some other authors have written a drive patch for a few different drives and have posted it here:

http://forum.doom9.org/showthread.php?t=139522

you will need to have wine installed to apply this patch. take all precautions advised by Oopho2ei such as making sure your drive has a safe mode. it is possible to damage your drive if the firmware upgrade is not done properly. don't worry too much though as plenty of people have applied the patch with no problems.

[raymondtrudeau]

i have searched the forum but cannot figure out how to use the program....i have my external bluray rom on my l drive....how do i use the command prompt for it to get the keys? thanks iam looking for the incrediable hulk keys...

[kkloster21]

@raymond:

we need a little more info. what operating system are you using? linux i assume? if you're using windows then i would check out AnyDVD as Oopho2ei has previously told you. it sounds like you are saying that you're using an external blu-ray drive, is that right? are you able to run aacskeys at all? does it give you an error? can you post the console output?

if you are getting an error then its most likely that your host certificate has been revoked which means that you need to apply the firmware patch (to your blu-ray drive) created by Oopho2ei and company. This firmware patch can damage your blu-ray drive if not done properly so it is important that you take all precautions advised by Oopho2ei in his thread here (this is also where the programs for applying the patches are located):

http://forum.doom9.org/showthread.php?t=139522

if your drive is not on this list, then you might need to wait until the keys are posted for the discs you want to decrypt.

post more info and hopefully someone will be able to help you! :)

[raymondtrudeau]

sorry iam using windows...i just do not know how to use the program...how do i use it in command prompt? my bluray drive is l drive..thanks

[kkloster21]

open a command window and change to the directory where you have the aacskeys.exe file. if your blu-ray drive is d then you should be able to type

C:\>aacskeys d

at the prompt (when you have the blu-ray disc in the drive) and it should give you a bunch of info including the Volume Unique Key (VUK). if not then just type "aacskeys" and it should bring up the help description. i'm pretty sure that you can just put the drive letter in there but i'm not a windows user, sorry. it never hurts to try things out though :)

[raymondtrudeau]

well i tried that and it says

c:\ is not recognized as an intrnal or external command,operable program or batch file

i did install the aacs file to my c location? thaks

[KenD00]

c:\> is the command prompt, it should be already there, you don't type this. Just type something like
aacskeys -v l
but i think it won't help you because i bet your drive is already >MKBv1 and won't return the keys. And i'm not sure if there is a patch for your drive. Regarding your experience with the command shell i suggest to use AnyDVD HD, its currently the easiest solution to decrypt HD-DVD's/BD's :(.

:rolleyes:

[raymondtrudeau]

c:\> is the command prompt, it should be already there, you don't type this. Just type something like
aacskeys -v l
but i think it won't help you because i bet your drive is already >MKBv1 and won't return the keys. And i'm not sure if there is a patch for your drive. Regarding your experience with the command shell i suggest to use AnyDVD HD, its currently the easiest solution to decrypt HD-DVD's/BD's :(.

:rolleyes:
well thanks but still no luck this is how i open a command prompt.. i go to start-all programs-accessories-command prompt...then it says c:\documents and settings\owner not c:\>aacskeys

i have the trial version if anydvd but it will not give me the keys for the incredible hulk so i then can use it on blu ray disc ripper 1.2...
would you happen to have the keys?:thanks:
thanks

[Orion17]

Slysoft just released the AnyDVD 6.4.7.8 BETA Update which 'MAY' have the key you need added to it, though I have not tested this yet as I do not have that BD Movie yet.

You will find a link to download it in their forums. Worth a shot.

[raymondtrudeau]

thanks i did get anydvd to work but for the future when they do not update and do not want to wait i thought this way would be cool....

[Peer van Heuen]

thanks i did get anydvd to work but for the future when they do not update and do not want to wait i thought this way would be cool....

Well, if you'd be using it in the future, you'd have to buy it anyway - and then you would not have to wait for it to update but just have it calculate the key you need.
No waiting involved.

[Turtleggjp]

thanks i did get anydvd to work but for the future when they do not update and do not want to wait i thought this way would be cool....

If you want to be ready for the future of decrypting Blu Rays, your best bet will be AnyDVD HD. Once you buy it, you'll be hard pressed to find discs that it doesn't work with. As a commercial company, they have the resources to keep up with all the AACS/BD+ updates. As nice as it is to see open source tools for this too, there's only so much free time that people can put into this stuff. Those interested in the fast and easy route, should just buy AnyDVD HD and be done with it. That's what I did almost 1 year ago, and I look back on it as one of the best purchases I have ever made. Now that you've seen it work, I hope you don't have any more doubts about it.

[raymondtrudeau]

hi guys when i run a command prompt with aacskeys i get this could not open file c:\\processing device keys simple .txt any ideas? thanks

[kkloster21]

@raymond

when you downloaded the aacskeys archive and unzipped it, in that directory there is a file called "ProcessingDeviceKeysSimple.txt" it needs to be in whatever directory you are running aacskeys from.

[raymondtrudeau]

@raymond

when you downloaded the aacskeys archive and unzipped it, in that directory there is a file called "ProcessingDeviceKeysSimple.txt" it needs to be in whatever directory you are running aacskeys from.

thanks iam a bit closer it now says this when i run it
.now i get could not find processing key or device key resulting in the media key
possible key tried xxxxxxxxxxxxxxxxxxxx

it give me 3 possible key tried then error: processmkb, errnr: -3


thanks... btw i have a liteon external blu ray rom....

[KenD00]

What MKBv does it display?

:rolleyes:

[KenD00]

From the changelog:

- Decrypts ACA content of HD-DVD's with both content types by default now
- New option --prefer-sca to decrypt SCA content of HD-DVD's with both content
types
- The library now returns all retrieved keys (MEK, VID, VUK, TUK's)

As usual, the archive contains precompiled binaries / libraries for linux (32 bit and 64 bit), windows and the source code, the zip and tar.gz have the same content.

Download links:
aacskeys 0.3.6 (zip) (http://rapidshare.com/files/172836358/aacskeys-0.3.6.zip)
aacskeys 0.3.6 (tar.gz) (http://rapidshare.com/files/172837437/aacskeys-0.3.6.tar.gz)

:rolleyes:

[Esurnir]

With the Dark Knight. Any hint of what I should do ^^;?

aacskeys 0.3.6 by arnezami, KenD00

Current path: C:\Users\Esurnir\Downloads\aacskeys-0.3.
6\aacskeys-0.3.6\bin\win32

MKBv: 9
Could not find a Processing Key or Device Key resulting in the Media Key.
Possible key tried: 09F911029D74E35BD84156C5635688C0
Possible key tried: 455FE10422CA29C4933F95052B792AB2
Possible key tried: F190A1E8178D80643494394F8031D9C8
Possible key tried: 7A5F8A09F833F7221BD41FA64C9C7933


ERROR: PROCESSMKB, errnr: -3

[sakman]

With the Dark Knight. Any hint of what I should do ^^;?

MKBv: 9

Wait for someone to release a MKBv9 Processing Key.

[KenD00]

yukiyuki please check your PM's.

:rolleyes:

[loo3aem3ON]

Could AACSkeys output the volume id before processing the MKB? Sometimes i only need the volume id (e.g. for BD+) and aacskeys exits before it's output if it can't decrypt the media key.

[KenD00]

I have added a command line switch that allows you to output the Volume ID only. The implementation is ugly but fits the purpose :D. I will make a new release this week, so this is your last chance for small wishes ;).

I am thinking about to transform aacskeys into a more general purpose library, but much time will pass until this will be finished.

:rolleyes: