World Trade Center Too large for burning to DVD-5

[Carolina Mike]

It seems when I do Movie Only the finished iso image is too large to be burned by Imgburn. I am using Version 1.20.4 , The finished iso size is 4,706, 476. Below is the Re-builder Log. All went well until the burning w/ Imgburn. I stopped it so it would not burn to the DVD as I did not want to waste a DVD.

[13:21:43] Phase I, PREPARATION started.
- DVD-RB v1.20.4
- AVISYNTH 2.5.6.0
- HC encoder selected
- "Movie Only" mode is enabled.
- Source: WORLD_TRADE_CENTER_WS_DISC1
- VTS_04: 3,353,392 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 185,819 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 65.9%
- Overall Bitrate : 4,570/3,656Kbs
- Space for Video : 3,458,470KB
- HIGH/LOW/TYPICAL Bitrates: 4,762/3,146/3,656 Kbs
[13:28:19] Phase I, PREPARATION completed in 7 minutes.
[13:28:26] Phase II ENCODING started
- Creating M2V for VTS_04 segment 0
- Creating M2V for VTS_04 segment 1
- Creating M2V for VTS_04 segment 2
- Creating M2V for VTS_04 segment 3
- Creating M2V for VTS_04 segment 4
- Creating M2V for VTS_04 segment 5
- Creating M2V for VTS_04 segment 6
- Creating M2V for VTS_04 segment 7
- Creating M2V for VTS_04 segment 8
- Creating M2V for VTS_04 segment 9
- Creating M2V for VTS_04 segment 10
- Creating M2V for VTS_04 segment 11
- Creating M2V for VTS_04 segment 12
- Creating M2V for VTS_04 segment 13
- Creating M2V for VTS_04 segment 14
- Creating M2V for VTS_04 segment 15
- Creating M2V for VTS_04 segment 16
- Creating M2V for VTS_04 segment 17
- Creating M2V for VTS_04 segment 18
- Creating M2V for VTS_04 segment 19
- Creating M2V for VTS_04 segment 20
- Creating M2V for VTS_04 segment 21
- Creating M2V for VTS_04 segment 22
- Creating M2V for VTS_04 segment 23
- Creating M2V for VTS_04 segment 24
- Creating M2V for VTS_04 segment 25
- Creating M2V for VTS_04 segment 26
- Creating M2V for VTS_04 segment 27
- Creating M2V for VTS_04 segment 28
- Creating M2V for VTS_04 segment 29
- Creating M2V for VTS_04 segment 30
- Creating M2V for VTS_04 segment 31
- Creating M2V for VTS_04 segment 32
- Creating M2V for VTS_04 segment 33
- Creating M2V for VTS_04 segment 34
- Creating M2V for VTS_04 segment 35
- Creating M2V for VTS_04 segment 36
- Creating M2V for VTS_04 segment 37
- Creating M2V for VTS_04 segment 38
- Creating M2V for VTS_04 segment 39
- Creating M2V for VTS_04 segment 40
- Creating M2V for VTS_04 segment 41
[16:07:06] Phase II ENCODING completed in 159 minutes.
[16:07:06] Phase III, REBUILD started.
- Processing VTS_04
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 15 VOBID 2 CELLID 1
- Rebuilding seg 16 VOBID 2 CELLID 2
- Rebuilding seg 17 VOBID 2 CELLID 3
- Rebuilding seg 18 VOBID 2 CELLID 4
- Rebuilding seg 19 VOBID 2 CELLID 5
- Rebuilding seg 20 VOBID 2 CELLID 6
- Rebuilding seg 21 VOBID 2 CELLID 7
- Rebuilding seg 22 VOBID 2 CELLID 8
- Rebuilding seg 23 VOBID 2 CELLID 9
- Rebuilding seg 24 VOBID 2 CELLID 10
- Rebuilding seg 25 VOBID 2 CELLID 11
- Rebuilding seg 26 VOBID 2 CELLID 12
- Rebuilding seg 27 VOBID 2 CELLID 13
- Rebuilding seg 28 VOBID 2 CELLID 14
- Rebuilding seg 29 VOBID 2 CELLID 15
- Rebuilding seg 30 VOBID 2 CELLID 16
- Rebuilding seg 31 VOBID 2 CELLID 17
- Rebuilding seg 32 VOBID 2 CELLID 18
- Rebuilding seg 33 VOBID 2 CELLID 19
- Rebuilding seg 34 VOBID 2 CELLID 20
- Rebuilding seg 35 VOBID 2 CELLID 21
- Rebuilding seg 36 VOBID 2 CELLID 22
- Rebuilding seg 37 VOBID 2 CELLID 23
- Rebuilding seg 38 VOBID 2 CELLID 24
- Rebuilding seg 39 VOBID 2 CELLID 25
- Rebuilding seg 40 VOBID 2 CELLID 26
- Rebuilding seg 41 VOBID 2 CELLID 27
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Correcting VTS Sectors...
- Building ISO Image...
- ISO Image successfully created.
- Writing ISO image to DVD...
- Error on Write-To-Disc. Check drive/disc.
- ISO Image WAS NOT successfully written.
[18:05:54] Phase III, REBUILD completed in 118 minutes.


*********************************

[Options]
Mode=5
OneClick=0
ReduceOpt=0
NoWarn=1
AdditionalOutput=1
LogFile=1
QuEncHQ=1
EncoderMinimized=1
RemoveDTS=1
HC_Quality=1
HC_Matrix=1
SkinVersion=12
AudioDub=1
QuEncodeType=0
iDCT=0
GOP=0
DCPrec=0
MainMatrix=Encoder Default
LowMatrix=Same as Main Feature
VLowMatrix=Same as Main Feature
ExtraMatrix=Same as Main Feature
ProCoder_Quality=4
DVD_Label=WORLD_TRADE_CENTER_WS_DISC1
DVD_Name=WORLD_TRADE_CENTER_WS_DISC1.ISO
MovieOnly=1
HalfD1=00
Convert_16_9=00
DisableInterlace=00
ConvertToYUY2=1
Skin=Rockas Original
ISO_Output=1
ISO_Delete_Option=0
Decrypter_Write=1
Delete_Image_Option=0
Completed=5
[Paths]
QuEnc=C:\Program Files\DVD-RB PRO\Encoders\QuEnc\QuEnc.exe
ReJig=C:\Program Files\DVD-RB PRO\Encoders\ReJig\ReJig.exe
HC=C:\Program Files\DVD-RB PRO\Encoders\HC Encoder\HCbatch.EXE
FFMPEG=C:\Program Files\DVD-RB PRO\Encoders\FFMpeg\ffmpeg.exe
ProCoder=C:\Program Files\DVD-RB PRO\Encoders\EclPro\EclPro.exe
DECOMB=C:\Program Files\AviSynth 2.5\plugins\Decomb521.dll
NICAUDIO=C:\Program Files\AviSynth 2.5\plugins\nicaudio.dll
MPEG2DEC=C:\Program Files\DVD-RB PRO\DGDecode.dll
Working=C:\Documents and Settings\XXXXXX\Desktop\DVD_Rebuilder Work Folder\
Output=C:\Documents and Settings\XXXXXXXX\Desktop\DVD-Rebuilder Finished Movie\
Source=C:\WORLD_TRADE_CENTER_WS_DISC1\VIDEO_TS\
[Audio]
Selected=11011
Remapping=
[Subpictures]
Selected=000
[Mobile]
Template=iPod 16:9 Viewing (640x360) 800Kbs
Format=0
Action=0

[Fishman0919]

With both HC v0.19.1 and CCE Basic 2.70.01.14 I got 4.31g.

What did you use to rip the disc?

[Carolina Mike]

I used DVDDecrypter as there is no encryption on the DVD as shown below:

Summary for drive F: (AnyDVD 6.0.9.5)
Drive (Hardware) Region: 1

Media is a Data DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 2047248 sectors (3998 MBytes)
Total size: 4094480 sectors (7997 MBytes)

Video DVD (or CD) label: WORLD_TRADE_CENTER_WS_DISC1
Media is CSS protected!
Video Standard: NTSC
Media is locked to region(s): 1!

Found & removed RCE protection!
DVD structure appears to be correct.
Structural copy protection not found.
Autorun not found on Video DVD.
Bad sector protection not found.
Emulating RPC-2 drive with region 1!

[Fishman0919]

On my machine with HC I used AnyDVD 6.0.9.5 and with my machine with CCE Basic I used RipIt4Me. With both rip and encoders I got 4.31g

[Fishman0919]

I just restarted and noticed I get diff Reduction Level and HIGH/LOW/TYPICAL

-----------------
[19:22:32] Phase I, PREPARATION started.
- DVD-RB v1.20.4
- AVISYNTH 2.5.6.0
- CCE 2.70.1.14 encoder selected.
- "Adaptive Quantizer Matrices" is enabled.
- "Movie Only" mode is enabled.
- Source: WORLD_TRADE_CENTER_WS_DISC1
- VTS_04: 3,353,392 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 185,819 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 76.3%
- Overall Bitrate : 5,290/4,232Kbs
- Space for Video : 4,003,850KB
- HIGH/LOW/TYPICAL Bitrates: 5,512/3,642/4,232 Kbs
[19:24:58] Phase I, PREPARATION completed in 2 minutes.

Maybe a rerip maight help

Edit: I only kept 6 ch AC3 English and Subpicture English

[Carolina Mike]

This is the first time that this has happened on any of the versions of DVD-RB Pro. I could not see anything incorrect in the logs but maybe others will find out what went wrong. I'll re-do the movie and report back.

Edit:this time I'll only keep 6.1 and delete all of the others

[Carolina Mike]

Re-did the movie and same problem(removed all audio except 6,1). I decided to do the movie when Imgburn came up w/ the size problem. The movie did burn but way to close to the outer edge. I did the movie in Shrink and it did the movie and it came in at 4.32gb. This either has to be a problem w/ Hanks encoder or I accidentially changed something today when I tried to do a movie using the IPOD controls. Can you tell me where I can get the previous version of DVD-RB -Pro as I had no problems w/ it.

[Carpo]

did you re-rip the movie using ripitforme ? or try and use anydvd - just in case, i have had rips with dvd-decrypter that looked fine but wernt - used rip it for me and all worked fine

just a thought

[jdobbs]

I just picked that up yesterday and haven't backed it up yet. I'll give it a run and see what I get.

[Carolina Mike]

Re-ripped it using AnyDVD and the problem persists but thanks for the suggestion. The only thing I have done different is to encode InsideMan to IPOD. I try and rip it w/ DVDFAB Dec. and then run it through VobBlanker before I try again. I am also going to do a fresh install of the program and only use the default setting like I always do.

[jdobbs]

The iPod encoding features are completely separate (actually in different modules) than the standard DVD backup. I was very careful about that so the two could be debugged independently and the new routines wouldn't add risk to those that are well tested. So I don't think there is a connection there. I think it's more likely something peculiar in that specific disc. I'll find out more with testing.

Yours is the NTSC version, I assume?

[Carpo]

try this setup - rip it for me and dvd-decrypter, anydvd + dvd-decypter

only time i have had a bad rip was when dvdfab decypter couldnt handle the disc

if the two methords above dont work, maybe there is a prb with the disc and/or drive

@jdobbs - did you see them pm i sent you ?

[Carolina Mike]

Jdobbs and Carpo,
Thanks for answering. I tried all of the combinations of the rippers as I usually use AnyDVD w/ DVD-D. I am now trying DVDFAB-Dec and ripped main movie to HD only. Ran it through VobBlanker(no changes but what the heck) and this time I am using QuEnc instead of Hank's encoder. I did trancode the movie w/ Shrink and the size camie out to 4350 which is what I want. I just do not like burning to close to the outer edge. It would be nice if that feature was offered w/in the GUI like it is in Shrink. I'll advise in a few hours how this try comes out. I really appreciate the help and suggestions.

[blutach]

That feature is offered - it's called (Beta) Preview/Edit :)

Regards

[jdobbs]

Have you done any preprocessing? I'm on my third iteration of this disc and it was sized normally on both of the first two. I'm trying it with HC 0.19.1 now.

[Carolina Mike]

Blutach,
Thanks for the information.


Jdobbs,
Re-did the DVD using QuEnc and all was well. Uninstalled the current version. Clean out the registry and then re-installed the program. Used this time Hanks encoder and all is well. I have no idea what the problem was but all is well now. No pre-processing was needed as the structure is fine and there was no encryption that DVDD can not handle

Thanks for everyone's help

[jdobbs]

Wow, that's really odd. At first I thought perhaps you may have set a higher value for TargetSectors -- but it obviously wasn't in your INI file... I wonder what could have been the cause?

[Carolina Mike]

Jdobbs,
If I was a betting man, the only thing it could have been is a bad D/L or it was something to do w/ me playing around w/ the IPOD feature and maybe not setting it back to the correct parameter but all is well now after re-installing the Pro version. Thanks for the help