1.0.5 Build 1 Fails alot more when the "warning" box was added.

[MALmen]

DVD2SVCD fails to close some of its tasks when this "warning" box wa added.. this happens under windows xp.

[mrbass]

works just fine for me...no crashes at all under winxp

[chainsaw135]

Malmen: The same thing happens 2 me with it stalling..seems 2 happen in the bbmpeg process never has happened in any of the other realeases ...so what i ended up doing was go back 2 the 1.0.4 build 2 and now i have no problems with stalling..

[orbit-r]

hi
yes i have the same prob.too in xp
usually the muxing step going to crash
but maybe it will be fixed in the "official release"

alternative i use the crashrecovery of an older version...

gruss
orbit-r:

[Mozart]

works fine for me also. WinXP Brasilian home version.

[chainsaw135]

I should of put my version of windows last post and more detail on where the program likes 2 stall at..so here goes
Windows XP Pro American Build the stalls only happen after the message boxes pop up so sometimes it will stall when the CCE message pops up or when the BBMPEg message pops up ..also chapters dont work at all no matter what i select ......so i just kept the 1.0.5 files installed and took 1.0.4 build 2.exe and copied it over the 1.0.5.exe now chapters work again dosent hang ...ect hope this helps

[Kryzzle]

Exactly the same for me... WinXP Pro German.
DVD2SVCD stalls when opening .ecl file in CCE and after BBMPEG muxing process has been finished. Crash recovery does sometimes work, but sometimes you get the same results.

[dvd2svcd]

Could you make a screendump of it when it stalls and mail it to me.

[MALmen]

i think the best would be to remove the warning window completely, it serves no purpose. everyone should know that it's unwise to touch the computer when dvd2svcd is running ??

[Mozart]

Of course it has a GREAT pourpose. You will need to avoid the use of your computer ONLY while the warning apears, instead of along the whole process.

[konrai]

i have crash / lock up at the bbmg or cce prompt. i use the crash recovery and seems to pick up where it crashed. this is for usa/windows xp. i have amd 850 266, epox mb, 512 pc133. anyone else tried the 1.04-2 patch for 1.05?

[chainsaw135]

Well i downloaded and updated dvd2svcd from 1.0.4.exe with the full dvdsvcd 1.0.5 build 2 and the same thing happens...either at cce or bbmp it hangs...this log file i'm about 2 post is when it stopped right after the menu popped up not 2 touch the computer ect right before it loads the ecl file....
oh another thing i noticed also the ripping speed when using the internal ripp is way off...previous versions were right...




Key found: EE73433CAF
--------------------------------------------------------
- 12/18/2001 11:57:04 PM
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.5 build 2
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 12/18/2001 11:57:07 PM
- Free on drive C: 11125.14 mb
- Free on drive F: 24319.33 mb
- Internal rip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- H:\VIDEO_TS\VTS_12_1.vob
- H:\VIDEO_TS\VTS_12_2.vob
- H:\VIDEO_TS\VTS_12_3.vob
- H:\VIDEO_TS\VTS_12_4.vob
- H:\VIDEO_TS\VTS_12_5.vob

Ripping: H:\VIDEO_TS\VTS_12_1.vob
Ripping: H:\VIDEO_TS\VTS_12_2.vob
Ripping: H:\VIDEO_TS\VTS_12_3.vob
Ripping: H:\VIDEO_TS\VTS_12_4.vob
Ripping: H:\VIDEO_TS\VTS_12_5.vob
Ripping finished. Speed: -54

--------------------------------------------------------
- 12/19/2001 12:04:42 AM
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- F:\dvd\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"C:\Program Files\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -IA=1 -CS=2 -EXIT -OF=[F:\dvd\DVD2AVI_Project_file] -IF=[F:\dvd\VTS_12_1.vob,F:\dvd\VTS_12_2.vob,F:\dvd\VTS_12_3.vob,F:\dvd\VTS_12_4.vob,F:\dvd\VTS_12_5.vob]
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 12/19/2001 12:07:34 AM
- Free on drive C: 11125.09 mb
- Free on drive F: 19768.12 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x81
Filename: F:\dvd\Extracted_audio_stream_1.ac3
Audio extraction finished.

--------------------------------------------------------
- 12/19/2001 12:11:28 AM
- Free on drive C: 11125.09 mb
- Free on drive F: 19387.33 mb
- AUDIO conversion
--------------------------------------------------------

Downmixing AC3 Stream. Filename: F:\dvd\Extracted_audio_stream_1.ac3
Autodetecting Azid dB Gain offset
Executing Azid. Commandline:
"C:\Program Files\DVD2SVCD\Azid\Azid.exe" -c normal -g30db -N -L -3db "F:\dvd\Extracted_audio_stream_1.ac3" "F:\dvd\DownmixedAudioSt1-48KHz.wav" >"F:\dvd\Azid.log"
Autodetection of dB offset finished
Gain offset: 12.00dB
Executing Azid. Commandline:
"C:\Program Files\DVD2SVCD\Azid\Azid.exe" -c normal -g12.00db -L -3db "F:\dvd\Extracted_audio_stream_1.ac3" "F:\dvd\DownmixedAudioSt1-48KHz.wav"
Downmixing of F:\dvd\Extracted_audio_stream_1.ac3 finished.

No delay and no WAV Downsampling.

Encoding wav file to mp2.
Executing tooLame. Commandline:
"C:\Program Files\DVD2SVCD\tooLame\tooLame.exe" -m s -b 192 -e "F:\dvd\FinalAudioSt1.wav" "F:\dvd\Encoded_audio_stream_1.mp2"
Audio conversion finished.

--------------------------------------------------------
- 12/19/2001 12:35:14 AM
- Free on drive C: 11125.05 mb
- Free on drive F: 17904.98 mb
- Video Encoding
--------------------------------------------------------
OK
Closing program
DVD2SVCD no. frames: 170992
CCE no. frames: 170950
StreamSectors: 1668566928
AudioSectors: 173435472
VideoPAPO: 23160384
ScanOffsetBytes: 205140
SeqAligningBytes: 13037787
VideoEndHeader: 8
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 1.00
PureMPEGStream: 1458728137.33
Seconds: 7130.05
CDSize: 800.00
Cut point 799.00
Variable Settings:
Frames: 170950
Anti Noise Filter: 2
Passes: 5
Image Quality: 17
VAF file creation: On
Video Encoding Mode: CBR
Avg. Bitrate: 1636

Executing Cinema Craft Encoder.
OK

[konrai]

Okay, i made 1 pass and cce stopped. i decreased my bit rate and went for a single pass and it seemed to work. this morning before i left for work, i reset cce for 4 passes. curious to see if it goes the full amount.
I do have a stupid question......so what file do i burn?? *.bin, *.cue, or the mpg file??:)