Working Directory could not be cleared error

[TotalHavoc]

I have started to get a working directory could not be cleared when I run a batch. It seems to be random. Below is part of my log file. Any ideas?

[16:08:09] Phase II ENCODING completed in 127 minutes.
[16:08:09] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_02
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 5
- Rebuilding seg 6 VOBID 1 CELLID 6
- Rebuilding seg 7 VOBID 1 CELLID 7
- Rebuilding seg 8 VOBID 1 CELLID 8
- Rebuilding seg 9 VOBID 1 CELLID 9
- Rebuilding seg 10 VOBID 1 CELLID 10
- Rebuilding seg 11 VOBID 1 CELLID 11
- Rebuilding seg 12 VOBID 1 CELLID 12
- Rebuilding seg 13 VOBID 1 CELLID 13
- Rebuilding seg 14 VOBID 1 CELLID 14
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 15 VOBID 2 CELLID 1
- Rebuilding seg 16 VOBID 2 CELLID 2
- Rebuilding seg 17 VOBID 2 CELLID 3
- Rebuilding seg 18 VOBID 2 CELLID 4
- Rebuilding seg 19 VOBID 2 CELLID 5
- Rebuilding seg 20 VOBID 2 CELLID 6
- Rebuilding seg 21 VOBID 2 CELLID 7
- Rebuilding seg 22 VOBID 2 CELLID 8
- Rebuilding seg 23 VOBID 2 CELLID 9
- Rebuilding seg 24 VOBID 2 CELLID 10
- Rebuilding seg 25 VOBID 2 CELLID 11
- Rebuilding seg 26 VOBID 2 CELLID 12
- Rebuilding seg 27 VOBID 2 CELLID 13
- Rebuilding seg 28 VOBID 2 CELLID 14
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_02_0.IFO
- Updating TMAP table...
- Processing VTS_03
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 2 VOBID 2 CELLID 1
- Rebuilding seg 3 VOBID 2 CELLID 2
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 4 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 5 VOBID 4 CELLID 1
- Rebuilding seg 6 VOBID 4 CELLID 2
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 7 VOBID 5 CELLID 1
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 8 VOBID 6 CELLID 1
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 9 VOBID 7 CELLID 1
- Updating NAVPACKS for VOBID_07
- Rebuilding seg 10 VOBID 8 CELLID 1
- Updating NAVPACKS for VOBID_08
- Rebuilding seg 11 VOBID 9 CELLID 1
- Updating NAVPACKS for VOBID_09
- Rebuilding seg 12 VOBID 10 CELLID 1
- Updating NAVPACKS for VOBID_10
- Rebuilding seg 13 VOBID 11 CELLID 1
- Updating NAVPACKS for VOBID_11
- Rebuilding seg 14 VOBID 12 CELLID 1
- Updating NAVPACKS for VOBID_12
- Rebuilding seg 15 VOBID 13 CELLID 1
- Updating NAVPACKS for VOBID_13
- Rebuilding seg 16 VOBID 14 CELLID 1
- Updating NAVPACKS for VOBID_14
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_03_0.IFO
- Updating TMAP table...
- Processing VTS_04
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 2 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 3 VOBID 4 CELLID 1
- Updating NAVPACKS for VOBID_04
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_04_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
- Building ISO Image...
- Removing DVD files
- ISO Image successfully created.
[16:22:39] Phase III, REBUILD completed in 14 minutes.

Done.
[16:22:39] PREPARE/ENCODE/REBUILD completed in 152 min.
[16:22:40] One Click encoding activated...
Aborted.
[17:02:37] One Click encoding activated...
-----------------
[17:02:38] Phase I, PREPARATION started.
- CCE 2.67.0.27 encoder selected.

as you cans see it says finishes the DVD and then I get the error at the "aborted" part. When I click ok on the error it skips that dvd and goes on to the next. The weird thing is this. DVD1 says it completed but there is no ISO file. I get the error at the start of dvd2. Click ok and it aborts dvd2 and goes on to dvd3.

[jdobbs]

You're probably using the same working folder for more than one job. Make sure you don't have another program using that directory. For instance, if you use explorer and start browsing the D2VAVS directory and forget to close it, the O/S will not allow DVD-RB to delete it when it gets to another job that will use it.

[TotalHavoc]

Hmm, I didn't have the folder open. The only thing I could think of that would cause it is Diskeeper. I have it set to defrag when the screen saver kicks in. Weird thing is I had my old computer setup the same way and it never did this. Just started on the new one I built a few weeks back. I disabled Diskeeper on the partition I do all my encoding on and will see what happens. I have a batch of 4 dvd running at the house now.

BTW AMD X2s rock... Encoding with CCE 2.67 I get a speed of just over 6 :)