DVDFab Decrypter 2.9.2.2 with Command Line Switches

Sedoy · 14th July 2005, 01:26

The new version have Command Line Switches implement

Download: http://www.dvdidle.com/download/DVDFabDecrypter29.exe

feedback · 14th July 2005, 05:44

There is also news that the output files that cannot be accepted by DVDShrink and Nero Recode, when copying Sony ArCCos protected DVDs has been fixed on Most of the ArCCos disks.

If you have been having the aforementioned problem then try out the latest
DVDFab Decrypter 2.9.3.2 (08/03/2005). Use the above posted link by Sedoy.

Regards,

EDIT: The above link posted by Sedoy, should always give you the direct download of the LATEST DVDFab Decrypter.

JohnG · 14th July 2005, 14:37

I can confirm that Shrink now recognizes the files for "Hitch" R1 after decrypting with v2.9.2.2. My previous attempt with the older version failed.

feedback · 14th July 2005, 16:27

Thanks for the verification JohnG.

I am sure once this info. becomes more widely known it will cut down on some people having DVD processing problems.
I believe people in R2 were really having a tough time with the older version DVDFab Decrypter.

Can Anyone in R2 verify that the new v2.9.2.2 is working for them with the ArCCos protected disks.

Regards,

andyfav · 15th July 2005, 10:11

Quote:

Originally Posted by feedback

Thanks for the verification JohnG.

Can Anyone in R2 verify that the new v2.9.2.2 is working for them with the ArCCos protected disks.

Regards,

In Italy "Hitch" R2 will be available in September.

I remember that with "Closer" the ArCCos protections found in UK, Spain,German and Italian editions was different.
Lightning_UK has created PSL files for UK,Spain,German and Italian edition.
Bye

feedback · 15th July 2005, 16:29

Thank you for that information andyfav.

Regards,

cynthia_old · 15th July 2005, 18:39

Quote:

Originally Posted by feedback

Can Anyone in R2 verify that the new v2.9.2.2 is working for them with the ArCCos protected disks.

If you are going to use the files in DVD Rebuilder - there have never been any problem.

If you plan to use the files in DVD Shrink/Nero Recode they now work on almost all ARccOS files from DVDFab Decrypter.

Still a problem with some titles such as RE2, Anaconda and perhaps a few other. The problem is that DVD Shrink/Nero Recode 2 expects an additional VOB files - that are not present on the DVD. An old bug in DVD Shrink/Nero Recode 2 that will be solved in an upcoming release of DVDFab Decrypter.

feedback · 16th July 2005, 00:22

Quote:

Still a problem with some titles such as RE2, Anaconda and perhaps a few other. The problem is that DVD Shrink/Nero Recode 2 expects an additional VOB files - that are not present on the DVD. An old bug in DVD Shrink/Nero Recode 2 that will be solved in an upcoming release of DVDFab Decrypter.

Well there you have it. Thanks to cynthia_old for that information. So, things will work even better in the next release of DVDFab Decrypter.

Regards,

MikeK · 16th July 2005, 13:21

Hi

I´m a bit confused.
Had no problems with RE2 German edition with dvdd.

greetz Mike

feedback · 16th July 2005, 19:21

DVDFab Decrypter 2.9.2.3 (07/16/2005) The newest release is now out.

Regards,

cynthia_old · 16th July 2005, 20:31

Quote:

Originally Posted by MikeK

Hi

I´m a bit confused.
Had no problems with RE2 German edition with dvdd.

greetz Mike

Neither did I have, DVD Decrypter worked like a charm on those discs.

Zyphon · 16th July 2005, 22:54

Quote:

Originally Posted by feedback

Can Anyone in R2 verify that the new v2.9.2.2 is working for them with the ArCCos protected disks.

Regards,

Hi,

I have upgraded to v2.9.2.3 and I have the UK PAL R2 version of Hitch and ripped it o.k and Shrink accepted it fine.

Also dvdd managed to decrypt it perfectly also and Shrink had no probs accepting the files.

SeeMoreDigital · 17th July 2005, 00:00

For a direct link to all DVDIdle's free tools, look here: -

http://www.dvdidle.com/free.htm

Cheers

nero61 · 18th July 2005, 18:48

Hi guys !!!
I tried with "ladder 49" italian version.
Dvdshrink 3.2.0.15 was unable to open the ripped files.
Using Vobblanker 2.0.0.2 solved the problem.
The files created using Vobblanker was perfectly managed by dvdshrink.
Thanks you very much for this pgm ;-) last dvddecrypter blocks on first vob.
regards

Zyphon · 18th July 2005, 19:29

There are a couple of things that annoy me about DVDFab Decrypter.

1. Is the lack of options.

2. Is that fact you can't save your extraction path like in dvdd and you constantly have to browse to your rip folder.

I suppose though beggars can't be chooser's at least it is free and does seem to do the job.

tylo · 18th July 2005, 23:36

fengtao is a very nice person, and has already added a lot of features since the first release, including the CLI after some correspondence with me. I am sure that if you ask kindly (and sensible), it won't be ignored.

PS. I agree that point 2. is a little annoying, but you can add command line options to set a fixed output directory in your shortcut. Point 1. is not in itself a minus.

Cropsy · 21st July 2005, 01:55

DVDDecrypter 3.5.4.0 is not able to get through this disc, that also go for AnyDVD 5321.

These 2 proggies together did manage to rip the movie to the HD with a million of "pack header warnings" "arghhhhh to many pack header warnings". Anyway Shrink will not analyse the result because vob 8 is missing. I tried to use vobblanker but the movie is ILUV and that is not supported by vobblanker.

Then I noticed you guys talking about DVDFab Decrypter alot and I thought that I'll give it a try, and guess what. It worked perfectly, and shrink worked all the way through the movie

So DVDFab Decrypter (2.9.2.3.) is getting up there and hopefully it will stay there.

cynthia_old · 21st July 2005, 03:14

Quote:

Originally Posted by Cropsy

DVDDecrypter 3.5.4.0 is not able to get through this disc,

Yes, it is. Use a PSL2 file. The norwegian and the swedish version should be the same DVD. You can find it here:

http://forum.digital-digest.com/showthread.php?t=51071

Cropsy · 21st July 2005, 05:14

Well, cynthia_old I am sorry to say that it did not work for me.

I followed the tutorial 100% and tried it several times just in case, but no luck. DVDDecrypter imported the PLS successfully but still didn't manage. Stops at the same spot every time. (beginning of vob 1). 16644 kb.

Anyway DVDFab Decrypter does the job so......

It irritates me a bit though.

I'll try to make a PLS file, you'll hear from me

Started ripping now and I noticed that this is the first sector.
W 05:20:08 Failed to read Sector 256304 - No Seek Complete
It is a bit different than your PLS file.

cynthia_old · 21st July 2005, 06:34

Hi!

Odd that they are releasing two different versions in scandinavia. I have norwegian subs in my version.

The barcode on my box says 5 050582 329445/DVD 823 294 4 * 48

I know that the danish release is the same as the swedish. So that the Norway should be given a different release sounds strange.

14th July 2005, 01:26	#1 \| Link
Sedoy Registered User Join Date: Jan 2004 Posts: 6	DVDFab Decrypter 2.9.2.2 with Command Line Switches The new version have Command Line Switches implement Download: http://www.dvdidle.com/download/DVDFabDecrypter29.exe

14th July 2005, 05:44	#2 \| Link
feedback Gold (Au) Member Join Date: Apr 2005 Location: USA Posts: 832	Download the LATEST DVDFab Decrypter with Command Line Switches There is also news that the output files that cannot be accepted by DVDShrink and Nero Recode, when copying Sony ArCCos protected DVDs has been fixed on Most of the ArCCos disks. If you have been having the aforementioned problem then try out the latest DVDFab Decrypter 2.9.3.2 (08/03/2005). Use the above posted link by Sedoy. Regards, EDIT: The above link posted by Sedoy, should always give you the direct download of the LATEST DVDFab Decrypter. __________________ *********************************************************** Don't assume anything...Verify! It's as easy as 3.14159265 The Problem is Usually found between the Chair and the Keyboard! Last edited by feedback; 5th August 2005 at 02:20. Reason: Updated Version Again

14th July 2005, 16:27	#4 \| Link
feedback Gold (Au) Member Join Date: Apr 2005 Location: USA Posts: 832	Thanks for the verification JohnG. I am sure once this info. becomes more widely known it will cut down on some people having DVD processing problems. I believe people in R2 were really having a tough time with the older version DVDFab Decrypter. Can Anyone in R2 verify that the new v2.9.2.2 is working for them with the ArCCos protected disks. Regards, __________________ *********************************************************** Don't assume anything...Verify! It's as easy as 3.14159265 The Problem is Usually found between the Chair and the Keyboard!

15th July 2005, 16:29	#6 \| Link
feedback Gold (Au) Member Join Date: Apr 2005 Location: USA Posts: 832	Thank you for that information andyfav. Regards, __________________ *********************************************************** Don't assume anything...Verify! It's as easy as 3.14159265 The Problem is Usually found between the Chair and the Keyboard!

16th July 2005, 19:21	#10 \| Link
feedback Gold (Au) Member Join Date: Apr 2005 Location: USA Posts: 832	DVDFab Decrypter 2.9.2.3 (07/16/2005) The newest release is now out. Regards, __________________ *********************************************************** Don't assume anything...Verify! It's as easy as 3.14159265 The Problem is Usually found between the Chair and the Keyboard!

14th July 2005, 14:37	#3 \| Link
JohnG Registered User Join Date: Mar 2005 Posts: 57	I can confirm that Shrink now recognizes the files for "Hitch" R1 after decrypting with v2.9.2.2. My previous attempt with the older version failed.

16th July 2005, 13:21	#9 \| Link
MikeK Registered User Join Date: Jun 2002 Location: Germany Posts: 19	Hi I´m a bit confused. Had no problems with RE2 German edition with dvdd. greetz Mike

17th July 2005, 00:00	#13 \| Link
SeeMoreDigital Life looks better in HDTV Join Date: Jun 2003 Location: UK Posts: 10,009	For a direct link to all DVDIdle's free tools, look here: - http://www.dvdidle.com/free.htm Cheers __________________ Still confused about anamorphic images? Then look here! \| Main Encoding Interests: Hardware device playback \| My Gear \|

18th July 2005, 18:48	#14 \| Link
nero61 Registered User Join Date: Feb 2004 Posts: 1	Hi guys !!! I tried with "ladder 49" italian version. Dvdshrink 3.2.0.15 was unable to open the ripped files. Using Vobblanker 2.0.0.2 solved the problem. The files created using Vobblanker was perfectly managed by dvdshrink. Thanks you very much for this pgm ;-) last dvddecrypter blocks on first vob. regards

18th July 2005, 19:29	#15 \| Link
Zyphon Registered User Join Date: Mar 2005 Location: UK Posts: 190	There are a couple of things that annoy me about DVDFab Decrypter. 1. Is the lack of options. 2. Is that fact you can't save your extraction path like in dvdd and you constantly have to browse to your rip folder. I suppose though beggars can't be chooser's at least it is free and does seem to do the job. __________________ Regards Michael.

18th July 2005, 23:36	#16 \| Link
tylo Author of D2SRoBa Join Date: Mar 2003 Posts: 483	fengtao is a very nice person, and has already added a lot of features since the first release, including the CLI after some correspondence with me. I am sure that if you ask kindly (and sensible), it won't be ignored. PS. I agree that point 2. is a little annoying, but you can add command line options to set a fixed output directory in your shortcut. Point 1. is not in itself a minus. Last edited by tylo; 18th July 2005 at 23:43.

21st July 2005, 01:55	#17 \| Link
Cropsy keep it coming Join Date: Oct 2001 Location: Norway Posts: 36	Closer R2 - R5 PAL DVDDecrypter 3.5.4.0 is not able to get through this disc, that also go for AnyDVD 5321. These 2 proggies together did manage to rip the movie to the HD with a million of "pack header warnings" "arghhhhh to many pack header warnings". Anyway Shrink will not analyse the result because vob 8 is missing. I tried to use vobblanker but the movie is ILUV and that is not supported by vobblanker. Then I noticed you guys talking about DVDFab Decrypter alot and I thought that I'll give it a try, and guess what. It worked perfectly, and shrink worked all the way through the movie So DVDFab Decrypter (2.9.2.3.) is getting up there and hopefully it will stay there.

21st July 2005, 05:14	#19 \| Link
Cropsy keep it coming Join Date: Oct 2001 Location: Norway Posts: 36	Well, cynthia_old I am sorry to say that it did not work for me. I followed the tutorial 100% and tried it several times just in case, but no luck. DVDDecrypter imported the PLS successfully but still didn't manage. Stops at the same spot every time. (beginning of vob 1). 16644 kb. Anyway DVDFab Decrypter does the job so...... It irritates me a bit though. I'll try to make a PLS file, you'll hear from me Started ripping now and I noticed that this is the first sector. W 05:20:08 Failed to read Sector 256304 - No Seek Complete It is a bit different than your PLS file. Last edited by Cropsy; 21st July 2005 at 05:24.

21st July 2005, 06:34	#20 \| Link
cynthia_old Unadvanced Newbie Join Date: Aug 2004 Location: Sweden Posts: 147	Hi! Odd that they are releasing two different versions in scandinavia. I have norwegian subs in my version. The barcode on my box says 5 050582 329445/DVD 823 294 4 * 48 I know that the danish release is the same as the swedish. So that the Norway should be given a different release sounds strange.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode