1.0+Trellis fix request.

Sharktooth · 31st May 2004, 13:30

Since i have not so much time to play with xvid sources, is there anyone willing to compile a reasonably fast win32 build of 1.0 with Trellis fix?

celtic_druid · 31st May 2004, 14:30

Ok, just did a release-1_0-branch compile which looks like it contains the fixes.

With and without installer.
http://celticdruid.no-ip.com/xvid/

Sharktooth · 31st May 2004, 14:36

Thanks a lot.

amango · 31st May 2004, 14:44

These builds does not work. I get an error message with Virtual Dub "xvidcore.dll not found", after starting the encoding process.

Sharktooth · 31st May 2004, 14:57

Yep. Got the same problem.

Teegedeck · 31st May 2004, 15:10

Reinstall your previous XviD and try just replacing the old DLLs with the new ones. I think it should work for the time being.

celtic_druid · 31st May 2004, 15:14

Just tried it, which I must admit I had not before (had a cvs head compile installed) and it worked fine.

Only tested the installed on XP though. Just download the 7z version and use the inf to install the codec and regsvr32 the .ax or as said simply copy over a 1.0 install.

The error would I guess suggest that the vfw file is installed and registered correctly, but that xvidcore.dll is not found in the same directory or at least not where it is supposed to be.

Sharktooth · 31st May 2004, 15:20

I only tried the 7zip and used the .inf for installing and got the error.
Reinstalled the Koepi's build and it worked. so i tried to replace the 2 DLL files and got the error again.

The Xvid GUI shows up correctly but an error message comes up exactly when VMD starts the encoding.

celtic_druid · 31st May 2004, 15:24

What does the about box say? Because usually it reads the xvidcore.dll version.

Sharktooth · 31st May 2004, 15:27

It says blah blah blah May 31 blah blah... and xvidcore.dll not found

springl · 31st May 2004, 15:27

Some ICL-compiled files require libmmd.dll in \windows\system32

Sharktooth · 31st May 2004, 15:30

Koepi's build is built with ICL too.

EDIT: libmmd.dll fixed the shiznit.

springl · 31st May 2004, 15:39

celtic_druid · 31st May 2004, 15:41

Think I may have it. No matter where you install xvidvfw.dll, xvidcore.dll will only be found if it is in a path directory whether that be system32, your maya bin directory or whatever.

Even if it (xvidcore.dll) is in the same directory as xvidvfw.dll it still doesn't seem to be found unless of course that dir happens to be listed as a path.

Sharktooth · 31st May 2004, 15:44

it was libmmd.dll...
damn ICL.
Btw thanks for the build

i hope trellis got really fixed.

Leak · 31st May 2004, 16:16

Quote:

Originally posted by celtic_druid
Think I may have it. No matter where you install xvidvfw.dll, xvidcore.dll will only be found if it is in a path directory whether that be system32, your maya bin directory or whatever.

Even if it (xvidcore.dll) is in the same directory as xvidvfw.dll it still doesn't seem to be found unless of course that dir happens to be listed as a path.

Still, without libmmd.dll it's a no-go; thank god I had that file lying around because of HeadAC3he.

Sou you might either want to distribute it in your installer/zip or link libm.lib statically into your binaries if they should work right out-of-the-box...

np: Sami Koivikko - Nite Herbs

zettai · 31st May 2004, 21:52

Is there any way of compiling this without the need for libmmd.dll?

chilledoutuk · 31st May 2004, 22:05

celtic_druid has libmmd.dll on his site i dont see the problem. cheers for the builds by the way celtic_druid

pernas · 31st May 2004, 22:07

Thanks celticdruid

Has anyone tried the fix yet ?

/Per

Soulhunter · 31st May 2004, 22:13

Quote:

Originally posted by chilledoutuk
celtic_druid has libmmd.dll on his site i dont see the problem. cheers for the builds by the way celtic_druid

RareWares also...

Bye

31st May 2004, 13:30	#1 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 10,818	1.0+Trellis fix request. Since i have not so much time to play with xvid sources, is there anyone willing to compile a reasonably fast win32 build of 1.0 with Trellis fix? __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!!

31st May 2004, 14:36	#3 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 10,818	Thanks a lot. __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!!

31st May 2004, 14:57	#5 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 10,818	Yep. Got the same problem. __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!!

31st May 2004, 15:10	#6 \| Link
Teegedeck Moderator, Ex(viD)-Mascot Join Date: Oct 2001 Posts: 2,564	Reinstall your previous XviD and try just replacing the old DLLs with the new ones. I think it should work for the time being. __________________ It's a man's life in Doom9's 52nd MPEG division. "The cat sat on the mat." ATM I'm thoroughly enjoying the Banshee - a fantastic music player/ripper for Linux. Give it a whirl!

31st May 2004, 15:20	#8 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 10,818	I only tried the 7zip and used the .inf for installing and got the error. Reinstalled the Koepi's build and it worked. so i tried to replace the 2 DLL files and got the error again. The Xvid GUI shows up correctly but an error message comes up exactly when VMD starts the encoding. __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!! Last edited by Sharktooth; 31st May 2004 at 15:24.

31st May 2004, 14:30	#2 \| Link
celtic_druid Registered User Join Date: Oct 2001 Location: Melbourne, Australia Posts: 2,175	Ok, just did a release-1_0-branch compile which looks like it contains the fixes. With and without installer. http://celticdruid.no-ip.com/xvid/

31st May 2004, 14:44	#4 \| Link
amango Registered User Join Date: Oct 2002 Posts: 78	These builds does not work. I get an error message with Virtual Dub "xvidcore.dll not found", after starting the encoding process.

31st May 2004, 15:14	#7 \| Link
celtic_druid Registered User Join Date: Oct 2001 Location: Melbourne, Australia Posts: 2,175	Just tried it, which I must admit I had not before (had a cvs head compile installed) and it worked fine. Only tested the installed on XP though. Just download the 7z version and use the inf to install the codec and regsvr32 the .ax or as said simply copy over a 1.0 install. The error would I guess suggest that the vfw file is installed and registered correctly, but that xvidcore.dll is not found in the same directory or at least not where it is supposed to be.

31st May 2004, 15:24	#9 \| Link
celtic_druid Registered User Join Date: Oct 2001 Location: Melbourne, Australia Posts: 2,175	What does the about box say? Because usually it reads the xvidcore.dll version.

31st May 2004, 15:27	#10 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 10,818	It says blah blah blah May 31 blah blah... and xvidcore.dll not found __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!!

31st May 2004, 15:27	#11 \| Link
springl Registered User Join Date: Nov 2002 Posts: 32	Some ICL-compiled files require libmmd.dll in \windows\system32

31st May 2004, 15:30	#12 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 10,818	Koepi's build is built with ICL too. EDIT: libmmd.dll fixed the shiznit. __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!! Last edited by Sharktooth; 31st May 2004 at 15:32.

31st May 2004, 15:39	#13 \| Link
springl Registered User Join Date: Nov 2002 Posts: 32

31st May 2004, 15:41	#14 \| Link
celtic_druid Registered User Join Date: Oct 2001 Location: Melbourne, Australia Posts: 2,175	Think I may have it. No matter where you install xvidvfw.dll, xvidcore.dll will only be found if it is in a path directory whether that be system32, your maya bin directory or whatever. Even if it (xvidcore.dll) is in the same directory as xvidvfw.dll it still doesn't seem to be found unless of course that dir happens to be listed as a path.

31st May 2004, 15:44	#15 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 10,818	it was libmmd.dll... damn ICL. Btw thanks for the build i hope trellis got really fixed. __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!!

31st May 2004, 21:52	#17 \| Link
zettai Fascinated Lurker Join Date: Feb 2002 Location: Durham, UK Posts: 237	Is there any way of compiling this without the need for libmmd.dll?

31st May 2004, 22:05	#18 \| Link
chilledoutuk Registered User Join Date: Jun 2003 Posts: 334	celtic_druid has libmmd.dll on his site i dont see the problem. cheers for the builds by the way celtic_druid

31st May 2004, 22:07	#19 \| Link
pernas Never give up Join Date: Jan 2004 Location: Sweden Posts: 46	Thanks celticdruid Has anyone tried the fix yet ? /Per

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode