DoCCE v1.0.1.5 wont work with Cinema Craft Encoder v2.67.00.11

chilliman · 26th June 2003, 23:24

DoCCE v1.0.1.5 wont work with latest Cinema Craft Encoder v2.67.00.11. I got this strange message.

CCE Executable associated with EclCCE is not supported by DoCCE4U
Please reconfigure EclCCE and restart DoCCE4U.

I have already reconfigure EclCCE DoCCE4U but i got same message allover again. Nothing happen DoCCE will only close it self down

PhAtfiSh · 26th June 2003, 23:52

yeah, if you guys can get round to it support for this new version would be cool

AndyP · 27th June 2003, 21:40

Same problem... stange as I think others have it working...

Andy

[BMC] · 28th June 2003, 05:20

This is strange. I have DoCCE4U working with this version of CCE but when I try to use it in combination with ReAuthorist I get the same error message.

Eyes`Only · 1st July 2003, 08:37

heh I get the same error and can't get past it.

Quote:

Same problem... stange as I think others have it working...

Andy

Well then can you please ask someone who has it working how they did it?

Not that I think there's actually a need for this new CCE version, but since I have to test everything and anything, it would be nice to know how 'others' got it working.

Thanks,

Eyes

PhAtfiSh · 1st July 2003, 20:01

it wont even work in docce for me. It just complains about it not being a supported version.

This is the only newer version of cce i have (2.5+), the previous 2.67.xx seem to be hard to find. And the 2.66 version i have prolly wont work either.

SiXXGuNNZ · 8th July 2003, 23:44

yes, an update would be nice

mguru · 19th July 2003, 05:15

Any solutions yet?

mGuru

ophidio · 24th July 2003, 23:33

UP!!

I hope in an upgrade release

PhAtfiSh · 18th August 2003, 18:39

sorry to top this old thread, but i hear you can hex-edit docce4u to accept other versions of CCE that were not orginally supported, like the one above.

Does anyone know how you do this, i have taken a look at the docce4u .exe in an editor. But can see no obvious place to edit.

Maybe someone has done this and can show us how.

Thanks

Eyes`Only · 19th August 2003, 02:45

Well, I'm sure you can but I've never heard of it being done. I've got a hex edited version of the ccespt.exe that works (simply changed it to report that it is a lower version), however I did this for my own testing and for obvious reasons I can't give it out.

I'd ask whoever you heard about the hex edit trick from, since you are the one that heard it

idbirch2 · 19th August 2003, 09:56

After a lengthy 2 minute search using UltraEdit I managed to find the list of supported versions in the DoCCE4U executable. In you hex editor go to line/address 00044890h and you'll see a list of version numbers.

The first version number listed is 2.67.0.10. I changed the last 0 to a 1 and now I can use 2.67.00.11. When DoCCE4U opens it reports 2.66.00.10 though for some reason. I've tested it and it works.

Eyes`Only · 19th August 2003, 10:23

thanks idbirch2!

PhAtfiSh · 19th August 2003, 20:37

yeah thanks

dunno how i managed to miss that

Samurai · 28th December 2003, 15:30

Ok I'm also having this problem and it's making me more than frustrated. I've uninstalled everything relating to this on my PC. The above post did not help me, I still got the same message appearing. Please, if anyone else knows another way of making a QUALITY back up without using DVD Shrink (I'd rather invest time than quality) I'd much appreciate it. It seems that most of these guides are out of date and/or using out of date software. They're all conflicting.

Current Versions Are as follows:

Cinema Craft Encoder 2.64.01.10
Daemon Tools 3.41
DoCCE4U 1.0.1.5
DoItFast4U 1.4.0
DVD Decryptor 3.1.7.0
Scenarist 2.7

Please help as it's driving me crazy!!!!

Samurai

[BMC] · 28th December 2003, 16:08

Just make sure you have the most current version of eclcce. I just did a backup using CCE 2.67.00.23. I've backed up more than 100 dvds using "The Big Three" with nothing short of wonderful results

idbirch2 · 28th December 2003, 17:16

[BMC] is right - this is an old thread. Since eclCCE has been updated several times since this thread was started, all you need is the latest version of eclCCE (1.7b)

You should also think about trying BatchCCEws instead of DoCCE4U as DoItFast4U now detects and uses it. I'm also using 2.67.00.23 without problems.

Samurai · 28th December 2003, 18:31

Cheers for your suggestions guys... this has been bugging me for weeks and I just kept putting it off. I really want to learn how to do thi. Once again, many thanks.

Samurai · 28th December 2003, 18:34

Where did you guys get CCE 2.67.00.23? Is it the full version or the trial? The trial puts a logo on your film does it not?

Samurai

Samurai · 28th December 2003, 21:52

OK this is getting ridiculous. I've reinstalled everything except DoCCE4u and replacing it with BatchCCEws and I'm getting nearly the same error report.

"CCE Executable associated with EclCCE is not supported by BatchCCEWS".

This is annoying the hell out of me. Why can't this software be able to recognise each other. People have written guides, posted them on the Internet and when I follow the guides to the LETTER it doesn't work. I have all the latest versions, I've double-checked. My DVD Decryptor is now 3.1.9.0 in case someone is going to point that out. How is everyone able to do this and have no problems??

All I want is either someone to point me to a QUALITY over SPEED guide that actually works. If anyone would like screenshots of what I'm looking at they're more than welcome.

Samurai

26th June 2003, 23:24	#1 \| Link
chilliman Registered User Join Date: Oct 2001 Posts: 25	DoCCE v1.0.1.5 wont work with Cinema Craft Encoder v2.67.00.11 DoCCE v1.0.1.5 wont work with latest Cinema Craft Encoder v2.67.00.11. I got this strange message. CCE Executable associated with EclCCE is not supported by DoCCE4U Please reconfigure EclCCE and restart DoCCE4U. I have already reconfigure EclCCE DoCCE4U but i got same message allover again. Nothing happen DoCCE will only close it self down Last edited by chilliman; 26th June 2003 at 23:58.

18th August 2003, 18:39	#10 \| Link
PhAtfiSh part-time Join Date: Oct 2001 Location: England Posts: 52	sorry to top this old thread, but i hear you can hex-edit docce4u to accept other versions of CCE that were not orginally supported, like the one above. Does anyone know how you do this, i have taken a look at the docce4u .exe in an editor. But can see no obvious place to edit. Maybe someone has done this and can show us how. Thanks Last edited by PhAtfiSh; 19th August 2003 at 20:26.

19th August 2003, 02:45	#11 \| Link
Eyes`Only Dizzin It Fizzast Fo Yizz Join Date: Mar 2002 Location: USA Posts: 1,445	Well, I'm sure you can but I've never heard of it being done. I've got a hex edited version of the ccespt.exe that works (simply changed it to report that it is a lower version), however I did this for my own testing and for obvious reasons I can't give it out. I'd ask whoever you heard about the hex edit trick from, since you are the one that heard it __________________ "Those that can't... butcher. Those that can... DoItFast4U!" DoItFast4U! v.1.4.7 now available with: • Lightning fast subripping (up to 100x faster) •Choice of DoCCE4U/BatchCCE •DVD2AVIdg useable by ReAuthorist •Bitrate control for use with NuMenu4U •Extras Bitrate applied to smaller PGCs in Main VTS •ScenAid integration •Right-Click Menus •Minimize to Systray •Improved Deinterlace Scripts See: http://www.doitfast4u.com. Use the donation link on the above URL or the app itself to make a $15+ donation and join the VIP list today! Last edited by Eyes`Only; 19th August 2003 at 10:23.

19th August 2003, 10:23	#13 \| Link
Eyes`Only Dizzin It Fizzast Fo Yizz Join Date: Mar 2002 Location: USA Posts: 1,445	thanks idbirch2! __________________ "Those that can't... butcher. Those that can... DoItFast4U!" DoItFast4U! v.1.4.7 now available with: • Lightning fast subripping (up to 100x faster) •Choice of DoCCE4U/BatchCCE •DVD2AVIdg useable by ReAuthorist •Bitrate control for use with NuMenu4U •Extras Bitrate applied to smaller PGCs in Main VTS •ScenAid integration •Right-Click Menus •Minimize to Systray •Improved Deinterlace Scripts See: http://www.doitfast4u.com. Use the donation link on the above URL or the app itself to make a $15+ donation and join the VIP list today!

28th December 2003, 15:30	#15 \| Link
Samurai Registered User Join Date: Dec 2003 Location: London, United Kingdom Posts: 10	Ok I'm also having this problem and it's making me more than frustrated. I've uninstalled everything relating to this on my PC. The above post did not help me, I still got the same message appearing. Please, if anyone else knows another way of making a QUALITY back up without using DVD Shrink (I'd rather invest time than quality) I'd much appreciate it. It seems that most of these guides are out of date and/or using out of date software. They're all conflicting. Current Versions Are as follows: Cinema Craft Encoder 2.64.01.10 Daemon Tools 3.41 DoCCE4U 1.0.1.5 DoItFast4U 1.4.0 DVD Decryptor 3.1.7.0 Scenarist 2.7 Please help as it's driving me crazy!!!! Samurai __________________ http://www.myimgs.com/data/samuraii3/Sig001.gif

26th June 2003, 23:52	#2 \| Link
PhAtfiSh part-time Join Date: Oct 2001 Location: England Posts: 52	yeah, if you guys can get round to it support for this new version would be cool

27th June 2003, 21:40	#3 \| Link
AndyP Registered User Join Date: Mar 2002 Posts: 109	Same problem... stange as I think others have it working... Andy

28th June 2003, 05:20	#4 \| Link
[BMC] Registered User Join Date: Aug 2002 Posts: 50	This is strange. I have DoCCE4U working with this version of CCE but when I try to use it in combination with ReAuthorist I get the same error message.

1st July 2003, 20:01	#6 \| Link
PhAtfiSh part-time Join Date: Oct 2001 Location: England Posts: 52	it wont even work in docce for me. It just complains about it not being a supported version. This is the only newer version of cce i have (2.5+), the previous 2.67.xx seem to be hard to find. And the 2.66 version i have prolly wont work either.

8th July 2003, 23:44	#7 \| Link
SiXXGuNNZ Your Buddy Join Date: Jan 2003 Location: WA, USA Posts: 299	yes, an update would be nice

19th July 2003, 05:15	#8 \| Link
mguru Registered User Join Date: Apr 2002 Posts: 34	Any solutions yet? mGuru

24th July 2003, 23:33	#9 \| Link
ophidio Registered User Join Date: Apr 2003 Posts: 2	UP!! I hope in an upgrade release

19th August 2003, 09:56	#12 \| Link
idbirch2 Registered User Join Date: Oct 2002 Location: UK Posts: 647	After a lengthy 2 minute search using UltraEdit I managed to find the list of supported versions in the DoCCE4U executable. In you hex editor go to line/address 00044890h and you'll see a list of version numbers. The first version number listed is 2.67.0.10. I changed the last 0 to a 1 and now I can use 2.67.00.11. When DoCCE4U opens it reports 2.66.00.10 though for some reason. I've tested it and it works.

19th August 2003, 20:37	#14 \| Link
PhAtfiSh part-time Join Date: Oct 2001 Location: England Posts: 52	yeah thanks dunno how i managed to miss that

28th December 2003, 16:08	#16 \| Link
[BMC] Registered User Join Date: Aug 2002 Posts: 50	Just make sure you have the most current version of eclcce. I just did a backup using CCE 2.67.00.23. I've backed up more than 100 dvds using "The Big Three" with nothing short of wonderful results

28th December 2003, 17:16	#17 \| Link
idbirch2 Registered User Join Date: Oct 2002 Location: UK Posts: 647	[BMC] is right - this is an old thread. Since eclCCE has been updated several times since this thread was started, all you need is the latest version of eclCCE (1.7b) You should also think about trying BatchCCEws instead of DoCCE4U as DoItFast4U now detects and uses it. I'm also using 2.67.00.23 without problems.

28th December 2003, 18:31	#18 \| Link
Samurai Registered User Join Date: Dec 2003 Location: London, United Kingdom Posts: 10	Cheers for your suggestions guys... this has been bugging me for weeks and I just kept putting it off. I really want to learn how to do thi. Once again, many thanks. __________________ http://www.myimgs.com/data/samuraii3/Sig001.gif

28th December 2003, 18:34	#19 \| Link
Samurai Registered User Join Date: Dec 2003 Location: London, United Kingdom Posts: 10	Where did you guys get CCE 2.67.00.23? Is it the full version or the trial? The trial puts a logo on your film does it not? Samurai __________________ http://www.myimgs.com/data/samuraii3/Sig001.gif

28th December 2003, 21:52	#20 \| Link
Samurai Registered User Join Date: Dec 2003 Location: London, United Kingdom Posts: 10	OK this is getting ridiculous. I've reinstalled everything except DoCCE4u and replacing it with BatchCCEws and I'm getting nearly the same error report. "CCE Executable associated with EclCCE is not supported by BatchCCEWS". This is annoying the hell out of me. Why can't this software be able to recognise each other. People have written guides, posted them on the Internet and when I follow the guides to the LETTER it doesn't work. I have all the latest versions, I've double-checked. My DVD Decryptor is now 3.1.9.0 in case someone is going to point that out. How is everyone able to do this and have no problems?? All I want is either someone to point me to a QUALITY over SPEED guide that actually works. If anyone would like screenshots of what I'm looking at they're more than welcome. Samurai __________________ http://www.myimgs.com/data/samuraii3/Sig001.gif

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode