RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY - Page 434

benjyv · 18th October 2010, 05:07

@pacaveli211

Maybe you'r right , but in my country are some well-known and specialized terms , used only by specialists.
Generally speaking , using a primitive language/terms , understood by some as " fragmented english " , we can accept that OS is what you've said .

But as I know , here is not a language meeting or a forum for linguistic mistakes , and nobody asked you to intervene and make grammatical corrections .
If you know to help that user ,OK , if no , pls , stand back and never put in question elsewhere.
I've noticed that you've become a Knowing, as Atak's lawyer, which is an awkward position, especially when you do not know anything and try to give advice, confusing people.
Next time better stay flexed in your "plaster'
Cheers !!

PS : Pls , do not bother to reply me , because I will ignore you totally !!!

kenwheeler77 · 18th October 2010, 14:42

pacaveli211 was correct, it was difficult to understand what you were implying and this has nothing to do with a "language forum" (as you so put it), just common sense. When you don't describe something to someone properly and use the proper terms, then there is a chance that they will either still not understand you or mess something up because you described it wrong. I've been reading these posts for quite sometime now and honestly, Benjyv, you have been rude, degrading, and unappreciative of the help people have tried to give you. It's OK if you go ahead and "ignore" this post but for someone who is not really technically inclined in this field, I think that you are the last one who should try to help someone, especially with the bad attitude and condescending tone that you bring to the board.

Oh, and in our country (as in most countries including most likely your own), you don't have to be a specialist to use well-known or specialized terms. People in this country are allowed to use any terms they like to.

With that said, Atak, thank you very much for this program. I've been enjoying it for quite sometime now and it works wonderfully. And also thank you to all of the other regular posters who really try to assist people without trying to make them feel stupid or ridiculed.

NiGHTsC · 18th October 2010, 18:03

v1.16.3
Does anyone having problem to play video in PSP2001 with PSP profile?
My PSP said the video is not supported
I hope PSP does not care your resolution? cause my PSP video is 848x480

Thank you in advance.

Atak_Snajpera · 18th October 2010, 18:36

Quote:

I hope PSP does not care your resolution? cause my PSP video is 848x480

http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC#Levels

MAIN 3.0 -> max. res. 720×480@30.0 or 720×576@25.0
Unfortunately PSP ignores --sar values in stream for some stupid reason

NiGHTsC · 18th October 2010, 22:54

What is this non-sense-limitation T_T

Thanx Atak.

Brotoles · 18th October 2010, 23:09

Hi, I have a multi-angle movie (Final Fantasy VII Advent Children Complete).
I can't open the playlist file in RipBot, so I choose the first movie file, and RipBot automatically links all movie files, but it selects the movie files for the first angle...
Is there a way for me to choose which angle RipBot chooses?
Thanks for a really great app!

pacaveli211 · 19th October 2010, 04:12

ugghh....benjyv, I wasn't trying to correct your grammar nor was I even trying to be insulting
I was only clarifying that win7x86 is in fact an operating system, something you didn't seem to understand

Quote:

I've noticed that you've become a Knowing, as Atak's lawyer

I don't know what you're tryin to say here, I provide no legal counsel for Atak...he's my arch nemesis

Quote:

Next time better stay flexed in your "plaster'

I have no idea what that's supposed to mean either....

anyways, I realize I don't always have the answers...but I do try to be helpful and have helped some people
I've even helped you a time or two...I'm sorry if you get confused easily though.
I can stop trying to help people if others would prefer so...
and as kenwheeler77 said...you're kinda the last person who should be on here trying to help people
even some of the very basic / simple stuff seems to be difficult for you

pacaveli211 · 19th October 2010, 04:19

Brotoles, if it's a bluray with seamless branching you can change the playlist after ripbot has scanned the folders/bluray

Lighto · 19th October 2010, 05:22

Quote:

Originally Posted by JMGNYC

I am trying to rip a blu-ray to and iPad compatible MP4 (720p) that can also do double duty on my HTPC with 5.1 audio. I am hoping to get forced subtitles as well as chapter markers. It's the chapter markers that is driving me crazy. I just can't seem to find any setting or option for them although RipBot obviously know they're there? Am I missing something obvious or does RipBot just not do chapter markers?

I can't really help with this as I don't have blu-ray.

Let's just hope someone who can help sees this.

wolfbane5 · 19th October 2010, 08:24

Ran into a small problem today: Under picture properties, the extracted frame doesn't show up - it's just blank with Panel 1/2. It was working fine yesterday.

nekrosoft13 · 19th October 2010, 18:29

anyone else having audio out of sync in ripbot 1.16.3?

Not always but out of 5 files i re-encoded with 1.16.3 3 of them ended up with audio being out of sync.

this type of problem was rather uncommon with 1.16.2

Atak_Snajpera · 19th October 2010, 18:36

What container do you use?
Did you check a/v sync in preview?
show me content of demuxlog.txt

nekrosoft13 · 19th October 2010, 18:39

it was .ts container.

and I have not checked a/v sync in preview, the computer that renders videos doesn't have speakers, is just a "render" box.

I will open ripbot on my main rig and check the preview.

a/v sync is ok when original video is played in WMP or PowerDVD.

Atak_Snajpera · 19th October 2010, 18:42

recorded .ts could be damaged. Probably decoder during decoding droped some frames. Try this. change extension to .m2ts.(This will force remuxing to .mkv by eac3to)

nekrosoft13 · 19th October 2010, 22:00

ok, still at work, so haven't check the preview

but one of the files that resulted in a/v in ripbot later i encoded again in HDConvertToX 3.0 and there was no a/v issue.

stryker412 · 20th October 2010, 00:30

I'm going to be building a new PC soon. Can anyone tell me which of the current crop of "i" chips, will RipBot see the most benefit from?

pacaveli211 · 20th October 2010, 19:06

whatever is the best / fastest. x264 shouldn't be partial to anything
you can usually find benchmarks for x264 encoding if you google for them
here are a couple worth lookin at:

Code:

http://www.anandtech.com/show/2839/4
http://www.techarp.com/showarticle.aspx?artno=442
http://www.techarp.com/showarticle.aspx?artno=669

CpT · 20th October 2010, 19:15

Quote:

Originally Posted by stryker412

I'm going to be building a new PC soon. Can anyone tell me which of the current crop of "i" chips, will RipBot see the most benefit from?

http://www.newegg.com/Product/Produc...&name=Six-Core

soneca · 20th October 2010, 21:17

The x264 has an exceptional performance together with the i7 980X.

http://www.anandtech.com/bench/CPU/54

CpT · 20th October 2010, 21:42

Quote:

Originally Posted by soneca

The x264 has an exceptional performance together with the i7 980X.

http://www.anandtech.com/bench/CPU/54

Its very very fast.

http://valid.canardpc.com/show_oc.php?id=1441010

18th October 2010, 05:07	#8661 \| Link
benjyv Registered User Join Date: Oct 2009 Posts: 212	@pacaveli211 Maybe you'r right , but in my country are some well-known and specialized terms , used only by specialists. Generally speaking , using a primitive language/terms , understood by some as " fragmented english " , we can accept that OS is what you've said . But as I know , here is not a language meeting or a forum for linguistic mistakes , and nobody asked you to intervene and make grammatical corrections . If you know to help that user ,OK , if no , pls , stand back and never put in question elsewhere. I've noticed that you've become a Knowing, as Atak's lawyer, which is an awkward position, especially when you do not know anything and try to give advice, confusing people. Next time better stay flexed in your "plaster' Cheers !! PS : Pls , do not bother to reply me , because I will ignore you totally !!! Last edited by benjyv; 18th October 2010 at 05:17.

18th October 2010, 23:09	#8666 \| Link
Brotoles Registered User Join Date: May 2005 Posts: 22	Angle question Hi, I have a multi-angle movie (Final Fantasy VII Advent Children Complete). I can't open the playlist file in RipBot, so I choose the first movie file, and RipBot automatically links all movie files, but it selects the movie files for the first angle... Is there a way for me to choose which angle RipBot chooses? Thanks for a really great app!

19th October 2010, 18:36	#8672 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,814	What container do you use? Did you check a/v sync in preview? show me content of demuxlog.txt __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

19th October 2010, 18:42	#8674 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,814	recorded .ts could be damaged. Probably decoder during decoding droped some frames. Try this. change extension to .m2ts.(This will force remuxing to .mkv by eac3to) __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

20th October 2010, 19:06	#8677 \| Link
pacaveli211 Registered User Join Date: Aug 2009 Posts: 412	whatever is the best / fastest. x264 shouldn't be partial to anything you can usually find benchmarks for x264 encoding if you google for them here are a couple worth lookin at: Code: http://www.anandtech.com/show/2839/4 http://www.techarp.com/showarticle.aspx?artno=442 http://www.techarp.com/showarticle.aspx?artno=669

18th October 2010, 14:42	#8662 \| Link
kenwheeler77 Registered User Join Date: Apr 2009 Posts: 12	pacaveli211 was correct, it was difficult to understand what you were implying and this has nothing to do with a "language forum" (as you so put it), just common sense. When you don't describe something to someone properly and use the proper terms, then there is a chance that they will either still not understand you or mess something up because you described it wrong. I've been reading these posts for quite sometime now and honestly, Benjyv, you have been rude, degrading, and unappreciative of the help people have tried to give you. It's OK if you go ahead and "ignore" this post but for someone who is not really technically inclined in this field, I think that you are the last one who should try to help someone, especially with the bad attitude and condescending tone that you bring to the board. Oh, and in our country (as in most countries including most likely your own), you don't have to be a specialist to use well-known or specialized terms. People in this country are allowed to use any terms they like to. With that said, Atak, thank you very much for this program. I've been enjoying it for quite sometime now and it works wonderfully. And also thank you to all of the other regular posters who really try to assist people without trying to make them feel stupid or ridiculed.

18th October 2010, 18:03	#8663 \| Link
NiGHTsC Registered User Join Date: May 2007 Posts: 85	v1.16.3 Does anyone having problem to play video in PSP2001 with PSP profile? My PSP said the video is not supported I hope PSP does not care your resolution? cause my PSP video is 848x480 Thank you in advance.

18th October 2010, 22:54	#8665 \| Link
NiGHTsC Registered User Join Date: May 2007 Posts: 85	What is this non-sense-limitation T_T Thanx Atak.

19th October 2010, 04:19	#8668 \| Link
pacaveli211 Registered User Join Date: Aug 2009 Posts: 412	Brotoles, if it's a bluray with seamless branching you can change the playlist after ripbot has scanned the folders/bluray

19th October 2010, 08:24	#8670 \| Link
wolfbane5 Registered User Join Date: Sep 2008 Location: B.C., Canada Posts: 79	Ran into a small problem today: Under picture properties, the extracted frame doesn't show up - it's just blank with Panel 1/2. It was working fine yesterday.

19th October 2010, 18:29	#8671 \| Link
nekrosoft13 Registered User Join Date: Jun 2003 Location: Chicagoland or Poland Posts: 193	anyone else having audio out of sync in ripbot 1.16.3? Not always but out of 5 files i re-encoded with 1.16.3 3 of them ended up with audio being out of sync. this type of problem was rather uncommon with 1.16.2

19th October 2010, 18:39	#8673 \| Link
nekrosoft13 Registered User Join Date: Jun 2003 Location: Chicagoland or Poland Posts: 193	it was .ts container. and I have not checked a/v sync in preview, the computer that renders videos doesn't have speakers, is just a "render" box. I will open ripbot on my main rig and check the preview. a/v sync is ok when original video is played in WMP or PowerDVD.

19th October 2010, 22:00	#8675 \| Link
nekrosoft13 Registered User Join Date: Jun 2003 Location: Chicagoland or Poland Posts: 193	ok, still at work, so haven't check the preview but one of the files that resulted in a/v in ripbot later i encoded again in HDConvertToX 3.0 and there was no a/v issue.

20th October 2010, 00:30	#8676 \| Link
stryker412 Registered User Join Date: Feb 2002 Posts: 153	I'm going to be building a new PC soon. Can anyone tell me which of the current crop of "i" chips, will RipBot see the most benefit from?

20th October 2010, 21:17	#8679 \| Link
soneca Registered User Join Date: Feb 2008 Location: Brazil Posts: 753	The x264 has an exceptional performance together with the i7 980X. http://www.anandtech.com/bench/CPU/54

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode