smartLabs tsMuxeR: Transport Stream muxer

[ACrowley]

Originally Posted by piratburner

I will try the old one , thanks for the links :-)

To bad , the "Create Blu-Ray disc" is not supported :-(

Is there a newer version that works with HRA and Create Blu-Ray disc ?

I think so.. i have not the Time to test ist upwards...but i bet there are a few higher Version with proper/compliant DTS HRA output

I really hope Smartlabs will release a fixed Version soon.

[sucker]

i want to trim a TrueHD track with tsmuxer (or add a negative delay while remuxing, which essientally should be the same?)
i would like to trim it as precisely as possible (in ms), i need to trim it 3m:45s:516ms which is 223516ms, tsmuxer only accepts a 5 digit input, why is that (question to Roman) and is there any way around it?
as was mentioned in the thread about my prob in the Audio encoding forum, is it correct that trimming/delaying a TrueHD stream only works when the source is already a muxed .m2ts and it doesn´t work with demuxed files?

[deank]

Originally Posted by sucker

i would like to trim it as precisely as possible (in ms), i need to trim it 3m:45s:516ms which is 223516ms, tsmuxer only accepts a 5 digit input, why is that (question to Roman) and is there any way around it?

Cut-end in gui ver 1.8.8 accepts more than 5 digits.

[ACrowley]

I found another Problem.

The Popcornhour cant detect (auto framerate detection) 24.000Fps Stream properly when remuxed with TSmuxer. The untouched M2ts workd fine ,MKV too.
Ok, you can say that these Problems (DTS HRA Bug too) are more or less popcornhour related...sure, but these Problems are only caused by TSmuxer when (re)muxing into M2TS.

[piratburner]

Originally Posted by ACrowley

I found another Problem.

The Popcornhour cant detect (auto framerate detection) 24.000Fps Stream properly when remuxed with TSmuxer. The untouched M2ts workd fine ,MKV too.
Ok, you can say that these Problems (DTS HRA Bug too) are more or less popcornhour related...sure, but these Problems are only caused by TSmuxer when (re)muxing into M2TS.

I have a TviX so it's not only a PCH problem

[piratburner]

Originally Posted by ACrowley

Ah ok..

Latest Version in 2008 was TSmuxer 1.8.19b, correct ?
Doesnt work too with DTS HRA!

Somebody told me that TSmuxer 1.2.9 works with DTS HRA and Popcornhour.
And yes..the M2TS from TSmuxer 1.2.9works with DTS HR Passtrough

Have now tested 1.2.9 BUT it's only output standard DTS ! :-( not DTS-HD.

So its something wrong with HRA even at 1.2.9.

Going to test the original m2ts at my Tvix

[piratburner]

Originally Posted by piratburner

Have now tested 1.2.9 BUT it's only output standard DTS ! :-( not DTS-HD.

So its something wrong with HRA even at 1.2.9.

Going to test the original m2ts at my Tvix

OK, more testing......

Played the original m2ts file at my TviX AND there areNO SOUND either

So its a firmware issue for the TVIX not the TsmuxeR

[deank]

What kind of strange tsmuxer versions do you use? 1.2.x?! Try with 1.8.8 or 1.8.18 or 1.8.24 or 1.8.34.

[piratburner]

Originally Posted by deank

What kind of strange tsmuxer versions do you use? 1.2.x?! Try with 1.8.8 or 1.8.18 or 1.8.24 or 1.8.34.

I have tried with almost every version ,LIKE I SAY it's a FW issue for TVIX , since the original m2ts files DON'T work on my TVIX

So NO issue for TsmuxeR

[deank]

Here is a link to some tsmuxer versions I have:

http://multiAVCHD.deanBG.com/tsMuxeR/

[piratburner]

Originally Posted by deank

Here is a link to some tsmuxer versions I have:

http://multiAVCHD.deanBG.com/tsMuxeR/

And here are more
http://www.videohelp.com/tools/tsMux...sions#download

[DoomBot]

I found out as well that its a firmware issue on my Kaiboer K300 player with the DTS-HD problem.

[ACrowley]

Originally Posted by deank

What kind of strange tsmuxer versions do you use? 1.2.x?! Try with 1.8.8 or 1.8.18 or 1.8.24 or 1.8.34.

once again

Its a Probhlem caused by new TSmuxer Versions !! All newer Versions are NOT working clean with DTS-HRA
But the old v1.2.9 can mux DTS-HRA into M2TS and the Popcornhour and some orher SA Player can read/passtrough it

@pirateburner
Ive absolutly no Problem with untouched M2TS Streams on my Popcorn A110. M2TS with TrueHD/DTS-HD/HR..works perfectly fine.
Only remuxed M2TS output from TSmuxer breaks the playback of DTS-HRA.

[sucker]

thx for the hint Dean, the 1.8.4 GUI really accepts more than 5 digits in the trim/delay box while the new 1.8.30 GUI only accepts 5 digits
@ Roman: could you please change that back in the new GUI so that more than 5 digits are allowed in the delay/trim box?

tia

[roman76r]

New version of tsMuxeR is available: http://www.smlabs.net/tsmuxer_en.html
Two new features added: Sony wave64 support and mkv chapters.

Also, this version includes new experimental feature: parameter "secondary" for video streams. This options allows to mux PIP video stream. tsMuxeR centers PIP streams on the screen by vertical position. Possible this function allows to resolve problem with cropped video in future. This options available in tsMuxer only and does not provided in tsMuxerGUI.

sucker

could you please change that back in the new GUI so that more than 5 digits are allowed in the delay/trim box?

I increased the size of this fields. New GUI is here: www.smlabs.net/tsMuxer/tsMuxerGUI_1.9.2(b).zip

[cavediver]

I just downloaded the new version 1.9.1(b).zip. It won't open giving me a message that the file is corrupted.

[roman76r]

cavediver
Seemingly problem in your internet connection - file is valid. File size is 2,720,822 bytes.

[nwg]

Originally Posted by roman76r

cavediver
Seemingly problem in your internet connection - file is valid. File size is 2,720,822 bytes.

I am also getting a corrupt error.

edit.

It extracted ok with winrar but not with window built in zip.

[cavediver]

Originally Posted by roman76r

cavediver
Seemingly problem in your internet connection - file is valid. File size is 2,720,822 bytes.

There's nothing wrong with my internet connection. I've downloaded the 1.9.1(b).zip file from 3 different computers and none of them can open the file giving the same corrupt error. The 1.9.2(b) GUI downloaded directly from your link above and worked fine. It's just the 1.9.1(b).zip file from the Smartlabs website that won't work.

edit: I also got it to open with winrar, but get the corrupt message trying to open it with windows zip

[ExSport]

Used better compression algorithm which builtin zip don't support.
Use free 7-ZIP