Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
9th March 2013, 19:16 | #17961 | Link | |
Registered User
Join Date: Feb 2013
Posts: 84
|
Quote:
Any help on the above? To recap, I have a professional colour meter. Using the AVS test disk, I was checking the results and I found that the grayscale after calibration reads the following x and y: 0.313 0.322. Is that the proper white point? I thought that rec 709 was 0.3127 0.3290. I'm happy with x, but what about y? Thanks |
|
9th March 2013, 19:30 | #17962 | Link |
Registered User
Join Date: Apr 2009
Posts: 1,019
|
You are correct about D65.
yCMS has a tendency to get you close, but not correct, and does not offer controls to fine-tune the calibration. I would suggest trying to get your display closer to D65 with its own controls before creating the LUT, if possible. Unfortunately yCMS development seems to have halted, so we will have to wait for Madshi's new CMS implementation before we get anything like that. |
9th March 2013, 19:42 | #17963 | Link |
Registered User
Join Date: Feb 2013
Posts: 84
|
Ok, thanks. I just wanted to make sure I was not missing anything. It's still close enough for the time being.
Thanks for your advice, my display is calibrated under Windows and before calibrating it using my probe (X-rite, then I have a professional calibrated one that I use professionally) I did tweak the monitor's controls to reduce the amount of calibration required. Thanks for your help, looking forward to future development of yCMS and madVR |
9th March 2013, 23:57 | #17964 | Link |
Registered User
Join Date: Sep 2011
Posts: 72
|
I already asked, but whether this principle in algorithms will be introduced?
http://mrhaandi.blogspot.com/
__________________
Win7x64 Core i7 920 3.5GHz Noctua NH-D14/ArcticCooling MX-3 6(3x2)GB Transcend 1426MHz RoyalHD (64MB)[Solo6c][JPLAY]/HD7850DC22GD5V2[EIZOT965] Seasonic X-750 VelociRaptor WD4500HLHX/16TB_STORE |
10th March 2013, 13:58 | #17966 | Link |
Registered User
Join Date: Dec 2012
Location: Neverland, Brazil
Posts: 169
|
Hey fellow madVR users. I have a little of issue and I need help with it, please lend me your strength...!
The thing is, another fellow user of my guide isn't able to take screenshots with MPC-HC and madVR. But he is basically using the same setup as me with the same settings, the only difference is our hardware which made me think of the possibility of a driver's issue or madVR bug. He's using Windows 8 x64 and a GTX 670. If the drivers or madVR can't be the problem, do anyone have any heads up about what could cause this?
__________________
madVR scaling algorithms chart - based on performance x quality | KCP - A (cute) quality-oriented codec pack |
10th March 2013, 14:49 | #17967 | Link |
Registered User
Join Date: Oct 2011
Posts: 204
|
Sounds like Overlay Mode is being used, as by now, player-based Screenshot capability has been integrated into madVR for some time already. Under "rendering -> general settings", untick "enable windowed overlay (Windows 7 and newer)" and see if that fixes it.
|
10th March 2013, 14:55 | #17968 | Link |
Registered User
Join Date: Dec 2012
Location: Neverland, Brazil
Posts: 169
|
I thought of the same thing but he still didn't reply if he was using Overlay mode or not. I'll make sure he has it disabled. Thanks.
__________________
madVR scaling algorithms chart - based on performance x quality | KCP - A (cute) quality-oriented codec pack |
10th March 2013, 18:04 | #17971 | Link | |
Registered User
Join Date: Oct 2011
Posts: 204
|
Quote:
That's why I thought that Overlay Mode may be the culprit. However, I don't have an nVidia Card, so thanks for confirming! |
|
10th March 2013, 20:14 | #17972 | Link |
Registered User
Join Date: May 2008
Posts: 1,840
|
secvensor and cosmitz: madshi is probably the only one that can help. He usually puts a lot of effort replying when he comes around (which must take hours) but if he misses your posts try posting again while he's active.
|
11th March 2013, 01:20 | #17973 | Link |
Registered User
Join Date: Sep 2011
Posts: 72
|
turbojet
OK!
__________________
Win7x64 Core i7 920 3.5GHz Noctua NH-D14/ArcticCooling MX-3 6(3x2)GB Transcend 1426MHz RoyalHD (64MB)[Solo6c][JPLAY]/HD7850DC22GD5V2[EIZOT965] Seasonic X-750 VelociRaptor WD4500HLHX/16TB_STORE |
11th March 2013, 07:39 | #17974 | Link |
Broadband Junkie
Join Date: Oct 2005
Posts: 1,859
|
No idea if this is what the people above are experiencing, but screenshots taken by MPC-HC's screenshot function will come out blank if smooth motion is active and the video is unscaled. Someone filed a bug about that a few weeks ago.
Last edited by cyberbeing; 11th March 2013 at 10:58. |
11th March 2013, 10:04 | #17976 | Link |
German doom9/Gleitz SuMo
Join Date: Oct 2001
Location: Germany, rural Altmark
Posts: 6,782
|
There is a report in the german doom9/Gleitz forum that Canopus DV AVIs (FourCC: 'CDVC', decoded by Canopus DV decoder, neither ffdshow nor lav are installed) are not played with current versions of madVR via MPC-HC 1.6.5, but it worked with a very old version (0.09, from VideoHelp archives). Converted to MS DV, playback works.
Where might be the reason, are there raw video formats not supported anymore by madVR? |
11th March 2013, 10:11 | #17977 | Link |
Registered User
Join Date: Mar 2009
Posts: 3,650
|
Just recently tried enabling Intelligent Frame Creation on my Panasonic Plasma along with Smooth Motion with animated content, for the most part I got amazing results but there was the odd time I had artifacts of particular areas spread out across multiple frames. Madshi you own a Panasonic Plasma don't you? Is this something that could be improved upon? or are the two just not really suitable being used together?
|
11th March 2013, 11:21 | #17978 | Link |
Registered User
Join Date: May 2009
Posts: 212
|
Just curious if madVR could support the option of D3DFMT_A2R10G10B10 display buffer at FSE display mode ?
According to Microsoft, such mode is only valid at FSE for a display device. I am curious if there will be any further color processing rather than LUT on it --- when the display device is RAMDAC, DP or HDMI 1.3 deep-color? |
11th March 2013, 11:55 | #17979 | Link |
Registered User
Join Date: Sep 2011
Posts: 72
|
http://forum.themaister.net/viewtopic.php?id=127
__________________
Win7x64 Core i7 920 3.5GHz Noctua NH-D14/ArcticCooling MX-3 6(3x2)GB Transcend 1426MHz RoyalHD (64MB)[Solo6c][JPLAY]/HD7850DC22GD5V2[EIZOT965] Seasonic X-750 VelociRaptor WD4500HLHX/16TB_STORE |
12th March 2013, 18:47 | #17980 | Link | |
Registered User
Join Date: Mar 2007
Posts: 934
|
Quote:
__________________
TV Setup: LG OLED55B7V; Onkyo TX-NR515; ODroid N2+; CoreElec 9.2.7 |
|
Tags |
direct compute, dithering, error diffusion, madvr, ngu, nnedi3, quality, renderer, scaling, uhd upscaling, upsampling |
|
|