NuEnc 0.01b Released - Page 2

Peter Cheat · 13th November 2004, 11:13

What is the frame rate of your source? It might not be valid.

Bogalvator · 13th November 2004, 11:13

@clickit & Peter1234,

I just tried Nuenc 0.01 this morning, and it worked.

It might be because I disable "Extreme & High Quality seetings" in QuEnc 0.56 (guessing) - so perhaps uncheck all settings in QuEnc and then try to load NuEnc again?

Bogalvator · 13th November 2004, 11:17

By the way,

The "modified FFMpeg source" downloads up to 50% then disconnects.

Peter Cheat · 13th November 2004, 11:20

I don't think that would be a problem. I'll separate the registry entries though just in case for next release, which will have to be soon since there seems to be a few bugs.

EDIT:
Download problems are because of host.sk. They haven't been reliable for a while now. I've intended to move hosts, but couldn't find any decent ones. Use a download manager.

freelock7 · 13th November 2004, 11:25

PAL source.
It works fine with NuEnc0.00a.

Peter Cheat · 13th November 2004, 11:38

Does an error message show up when you try to encode? What settings are you using. I might have bungled up some options.

freelock7 · 13th November 2004, 11:48

Any error message.
It opens a new window with <encoding> and <statistics> but it remains blank. The encoder don't start.
Peter, why the new libavcodec is so small (312ko)?

Peter Cheat · 13th November 2004, 12:17

The reason it is so small is because I've removed MPEG-4 specific code (and code relating to other codecs). This is just to save bandwidth and to make it easier to download. If its larger than ~700KB, the download seems to dropout all the time.

Technically it would also make it faster, but saving ~100 cycles per frame is not going to make a difference on a machine that does 1,500,000,000 cycles per second

I can't figure out why it doesn't work. Try a different source maybe, and see if that works. I can't see how it can freeze with the encoding window without an error, and without starting.

buzzqw · 13th November 2004, 12:29

same here
stat is blank at start but if i move window i can see "something"

winxp sp1, p4 2.8ghz

(@freelock7 avcodec.dll is upxed, but even if upxed is small

BHH

Peter Cheat · 13th November 2004, 12:38

What do you mean by "something"? Do the statistics become partially visible (is it encoding, but the stats are just not correctly displayed?).

freelock7 · 13th November 2004, 12:58

The problem seems to come from this new compiled libavcodec.
Maybe I'm wrong but if i were you, I'll keep the NuEnc0.00d libavcodec file and add in it the new 0.01 changes.

Peter Cheat · 13th November 2004, 13:08

That is unlikely. I did remove a lot of code, sure. But 90% was related to QPEL and GMC. The rest was audio codecs, and video codecs like mpeg4, snow, cinepak etc. All code relating to MPEG1&2 were left alone. If I wasn't sure, I also left it. Others are not having problems so I doubt its a problem with the DLL. I know the GUI is a little bit dodgy, and just realised that if you minimise the window while encoding, then maximise it sometime later, the encoding stats might disappear. This will be fixed now. I'll have to release a new version tomorrow with all these fixes

EDIT:
I won't change back to NuEnc 0.00d DLL, I've fixed all the bugs that were found in it. I could recompile without removing any redundant code, but the only difference will be that it's twice as big.

clickit · 13th November 2004, 16:12

it works with seetings.zip

buzzqw · 13th November 2004, 16:45

look at this
http://www.64k.it/andres/Immagine.png

after a while (sometimes never) it display something but fps is like 0.14 per sec...
(p4 2.8ghz)

great appz btw !

BHH

after a while
EDIT: http://www.64k.it/andres/post.png

I have just clicked on setting.reg launch a conversion
Isn't strange "peak bitrate" ?

Peter1234 · 13th November 2004, 18:14

Peter Cheat,
After loading your settings the program starts. When I load an avs file and click the Encode button with your settings, the encode window opens up but encoding does not start. Encode window has no statistics and there is an empty box on it. Debug.log is empty.

Peter Cheat · 14th November 2004, 11:45

I've now fixed GUI problems in NuEnc 0.01a. It should start up correctly.

There are 2 versions. A small one with most codecs removed and a large one without anything removed. If you have a P4, the large one should work. I may have deleted P4 specific code when removing unused codecs

.

CQ Mode is now also linear (CQ 50 produces files about half the size of CQ 100).

freelock7 · 14th November 2004, 12:05

No more success!
Both of them don't work.
Always the same bug report:
<[mpeg2video @ 6551400C]removing common factors from framerate>

Peter Cheat · 14th November 2004, 12:15

I have a feeling that the encoding window is doing something weird. Try to encode, then press CTRL-ALT-DEL, click on the processes tab and see how much CPU NuEnc.exe is using. If its ~99% then its stuck in an endlesss loop somewhere...

freelock7 · 14th November 2004, 12:34

Cpu=99%
NuEnc seems to block the system (stand by).

Peter Cheat · 14th November 2004, 12:47

Ok, were getting somewhere then.
Try adding AssumeFPS(25) to the last line of the AVS script. Does the error still appear in the log?

13th November 2004, 11:13	#21 \| Link
Peter Cheat Just a Member Join Date: Aug 2004 Location: Australia Posts: 225	What is the frame rate of your source? It might not be valid. __________________ If you want it done properly, do it yourself! Modified Libavcodec Site

13th November 2004, 11:20	#24 \| Link
Peter Cheat Just a Member Join Date: Aug 2004 Location: Australia Posts: 225	I don't think that would be a problem. I'll separate the registry entries though just in case for next release, which will have to be soon since there seems to be a few bugs. EDIT: Download problems are because of host.sk. They haven't been reliable for a while now. I've intended to move hosts, but couldn't find any decent ones. Use a download manager. __________________ If you want it done properly, do it yourself! Modified Libavcodec Site Last edited by Peter Cheat; 13th November 2004 at 11:25.

13th November 2004, 11:38	#26 \| Link
Peter Cheat Just a Member Join Date: Aug 2004 Location: Australia Posts: 225	Does an error message show up when you try to encode? What settings are you using. I might have bungled up some options. __________________ If you want it done properly, do it yourself! Modified Libavcodec Site

13th November 2004, 11:48	#27 \| Link
freelock7 High beam Join Date: Apr 2004 Location: Belgium Posts: 290	Any error message. It opens a new window with <encoding> and <statistics> but it remains blank. The encoder don't start. Peter, why the new libavcodec is so small (312ko)? Last edited by freelock7; 13th November 2004 at 11:58.

13th November 2004, 12:17	#28 \| Link
Peter Cheat Just a Member Join Date: Aug 2004 Location: Australia Posts: 225	The reason it is so small is because I've removed MPEG-4 specific code (and code relating to other codecs). This is just to save bandwidth and to make it easier to download. If its larger than ~700KB, the download seems to dropout all the time. Technically it would also make it faster, but saving ~100 cycles per frame is not going to make a difference on a machine that does 1,500,000,000 cycles per second I can't figure out why it doesn't work. Try a different source maybe, and see if that works. I can't see how it can freeze with the encoding window without an error, and without starting. __________________ If you want it done properly, do it yourself! Modified Libavcodec Site

13th November 2004, 11:13	#22 \| Link
Bogalvator Registered User Join Date: Jun 2003 Location: Northampton, England Posts: 187	@clickit & Peter1234, I just tried Nuenc 0.01 this morning, and it worked. It might be because I disable "Extreme & High Quality seetings" in QuEnc 0.56 (guessing) - so perhaps uncheck all settings in QuEnc and then try to load NuEnc again?

13th November 2004, 11:17	#23 \| Link
Bogalvator Registered User Join Date: Jun 2003 Location: Northampton, England Posts: 187	By the way, The "modified FFMpeg source" downloads up to 50% then disconnects.

13th November 2004, 11:25	#25 \| Link
freelock7 High beam Join Date: Apr 2004 Location: Belgium Posts: 290	PAL source. It works fine with NuEnc0.00a.

13th November 2004, 12:29	#29 \| Link
buzzqw HDConvertToX author Join Date: Nov 2003 Location: Cesena,Italy Posts: 6,552	same here stat is blank at start but if i move window i can see "something" winxp sp1, p4 2.8ghz (@freelock7 avcodec.dll is upxed, but even if upxed is small BHH Attached Images

13th November 2004, 12:38	#30 \| Link
Peter Cheat Just a Member Join Date: Aug 2004 Location: Australia Posts: 225	What do you mean by "something"? Do the statistics become partially visible (is it encoding, but the stats are just not correctly displayed?). __________________ If you want it done properly, do it yourself! Modified Libavcodec Site

13th November 2004, 12:58	#31 \| Link
freelock7 High beam Join Date: Apr 2004 Location: Belgium Posts: 290	The problem seems to come from this new compiled libavcodec. Maybe I'm wrong but if i were you, I'll keep the NuEnc0.00d libavcodec file and add in it the new 0.01 changes.

13th November 2004, 13:08	#32 \| Link
Peter Cheat Just a Member Join Date: Aug 2004 Location: Australia Posts: 225	That is unlikely. I did remove a lot of code, sure. But 90% was related to QPEL and GMC. The rest was audio codecs, and video codecs like mpeg4, snow, cinepak etc. All code relating to MPEG1&2 were left alone. If I wasn't sure, I also left it. Others are not having problems so I doubt its a problem with the DLL. I know the GUI is a little bit dodgy, and just realised that if you minimise the window while encoding, then maximise it sometime later, the encoding stats might disappear. This will be fixed now. I'll have to release a new version tomorrow with all these fixes EDIT: I won't change back to NuEnc 0.00d DLL, I've fixed all the bugs that were found in it. I could recompile without removing any redundant code, but the only difference will be that it's twice as big. __________________ If you want it done properly, do it yourself! Modified Libavcodec Site Last edited by Peter Cheat; 13th November 2004 at 13:16.

13th November 2004, 16:12	#33 \| Link
clickit Registered User Join Date: Feb 2002 Location: Athens, Hellas Posts: 75	it works with seetings.zip __________________ it's one thing that i know for sure, that i know nothing for sure (Plato, ancient Greek Philosopher)

13th November 2004, 16:45	#34 \| Link
buzzqw HDConvertToX author Join Date: Nov 2003 Location: Cesena,Italy Posts: 6,552	look at this http://www.64k.it/andres/Immagine.png after a while (sometimes never) it display something but fps is like 0.14 per sec... (p4 2.8ghz) great appz btw ! BHH after a while EDIT: http://www.64k.it/andres/post.png I have just clicked on setting.reg launch a conversion Isn't strange "peak bitrate" ? Last edited by buzzqw; 13th November 2004 at 16:57.

13th November 2004, 18:14	#35 \| Link
Peter1234 Registered User Join Date: Aug 2004 Posts: 130	Peter Cheat, After loading your settings the program starts. When I load an avs file and click the Encode button with your settings, the encode window opens up but encoding does not start. Encode window has no statistics and there is an empty box on it. Debug.log is empty.

14th November 2004, 11:45	#36 \| Link
Peter Cheat Just a Member Join Date: Aug 2004 Location: Australia Posts: 225	I've now fixed GUI problems in NuEnc 0.01a. It should start up correctly. There are 2 versions. A small one with most codecs removed and a large one without anything removed. If you have a P4, the large one should work. I may have deleted P4 specific code when removing unused codecs . CQ Mode is now also linear (CQ 50 produces files about half the size of CQ 100). __________________ If you want it done properly, do it yourself! Modified Libavcodec Site

14th November 2004, 12:05	#37 \| Link
freelock7 High beam Join Date: Apr 2004 Location: Belgium Posts: 290	No more success! Both of them don't work. Always the same bug report: <[mpeg2video @ 6551400C]removing common factors from framerate>

14th November 2004, 12:15	#38 \| Link
Peter Cheat Just a Member Join Date: Aug 2004 Location: Australia Posts: 225	I have a feeling that the encoding window is doing something weird. Try to encode, then press CTRL-ALT-DEL, click on the processes tab and see how much CPU NuEnc.exe is using. If its ~99% then its stuck in an endlesss loop somewhere... __________________ If you want it done properly, do it yourself! Modified Libavcodec Site

14th November 2004, 12:34	#39 \| Link
freelock7 High beam Join Date: Apr 2004 Location: Belgium Posts: 290	Cpu=99% NuEnc seems to block the system (stand by).

14th November 2004, 12:47	#40 \| Link
Peter Cheat Just a Member Join Date: Aug 2004 Location: Australia Posts: 225	Ok, were getting somewhere then. Try adding AssumeFPS(25) to the last line of the AVS script. Does the error still appear in the log? __________________ If you want it done properly, do it yourself! Modified Libavcodec Site

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode