madVR - high quality video renderer (GPU assisted)

[mrmarioman]

Originally Posted by mclingo

I stand corrected, it was the V1 maxwell sub 900 series which used subsampling to get 4k 60hz, took my a while to find this though.

https://www.anandtech.com/show/8526/...x-980-review/5

Did the 900 series also get an upgrade to HDMI 2.0a for HDR metedata?

Yep, all the 900 series supports HDR.

https://developer.nvidia.com/high-dy...ay-development

[psyside]

Originally Posted by psyside

Does this look good? how to test my card?

Can anyone help me on this one? i get many frame drops, where did i messed up?

My settings are right here.

[psyside]

Originally Posted by Thauma

Hey, guys, I'm kinda a newbie when it comes to madvr. Can someone give me a helping hand of how to fully configure it for best results for 720p and 1080p videos (anime and movies mainly)? I am with GTX 1060 3gb GPU, I5-6500 CPU at 3,20 Ghz, 8GB ram, Win 10. I also use PotPlayer and run the paid version of SVP, plus the latest K-Lite codecs. As for monitor - Dell P2317H (1920x1080, 60 hz).

Your card is great, i'm a beginner as well, but imho that card is a sweet spot one.

[huhn]

your rendertiems are to high. try to lower some settings so the AVG rendertime is under 40 ms so a 24 fps source can be rendered in realtime.

for better results give 24p mode a chance or smoothmotion.
sadly the mojority of TV can't do 24p properly and in this case smoothmtoion is closer to a real cinema experience.

Originally Posted by Vegekou

I usually don't get dropped frames, except when I move the mouse cursor on the seek bar. In that case I get dropped frames, glitches and the screen goes black intermittently.
I think it's because of the last Intel video driver (23.20.16.4901 - Intel HD 520) but I'm not sure.
All the renders works good except for madVR.

you get a blackscreen when madVR switches between windowed fullscreen or windowed.
try overlay or d3d9 but you can ignore it too it will not harm image quality.

i can do a guess that is may have something todo with the hdmi "type" that switches between d3d11 windowed fullscreen and and d3d11 windowed.

nvidia has something like this under "adjust desktop colour settings" -> "Content reported to the display: auto-select".
with that active i saw something similar with a normal screen maybe intel has something like this too. sorry i can't test this.

[ryrynz]

Get rid of reduce banding and ringing for starters and possibly switch to ordered dithering.

[psyside]

Originally Posted by ryrynz

Get rid of reduce banding and ringing for starters and possibly switch to ordered dithering.

Hi, does this answer point to my questions or? thanks.

[AngelGraves13]

Maybe just try cheaper downscaling like Bicubic 60 or Catmull-Rom

[maiden]

Hi Guys,
Newb here.
Trying to get my movies to stop being jerky.
We are in Australia my TV is an lg55LF6300
connected to Onkyo TX-NR929 HTPC nvidia gforce GTX 750 Ti driver 388.59 windows 10 16gb ram
Jriver v23 and I bitstream.

Some help with madvr settings would be much appreciated.
I tried Full screen exclusive that did not work as the screen went black, irt would come on when the mouse was moved then straight back to black screen.

Thanks in advance

[Asmodian]

I suggest turning on smooth motion (under rendering).

[ryrynz]

Originally Posted by psyside

Hi, does this answer point to my questions or? thanks.

What do you think? The last few pages have been basically dealing with your constant enquiries.

[maiden]

Originally Posted by Asmodian

I suggest turning on smooth motion (under rendering).

As per the image smooth motion is already on

[Asmodian]

I cannot see the image. Don't attach images here, they usually don't get approved, at least not quickly. Post it on a hosting site and link it here.

[maiden]

Originally Posted by Asmodian

I cannot see the image. Don't attach images here, they usually don't get approved, at least not quickly. Post it on a hosting site and link it here.

Image link

[psyside]

Originally Posted by ryrynz

What do you think? The last few pages have been basically dealing with your constant enquiries.

There are similar questions to mine just few post just above yours, so this is why i couldn't tell. Thanks.

[ryrynz]

Miaden your present queue is the problem, try d3d11, try exclusive mode, do you have any apps open that could be interfering with madVR?

[maiden]

Originally Posted by ryrynz

Miaden your present queue is the problem, try d3d11, try exclusive mode, do you have any apps open that could be interfering with madVR?

Isnt exclusive mode this (I tried Full screen exclusive that did not work as the screen went black, irt would come on when the mouse was moved then straight back to black screen.)
nothing ese is on this machine

[ryrynz]

Yeah ok, at this point I'd reinstall the graphics drivers after uninstalling and then try resetting madVR to defaults if nothing changes.

[maiden]

Originally Posted by ryrynz

Yeah ok, at this point I'd reinstall the graphics drivers after uninstalling and then try resetting madVR to defaults if nothing changes.

where is this setting (present queue is the problem, try d3d11)

[ryrynz]

general settings tick use d3d11. Thing is I never had any issues with the 750Ti and d3d9 so I doubt this will make a difference.

[maiden]

Originally Posted by ryrynz

general settings tick use d3d11. Thing is I never had any issues with the 750Ti and d3d9 so I doubt this will make a difference.

ok now i am confused, didnt you say the queue was the problem?
Should I just revert to default settings??