madVR - high quality video renderer (GPU assisted) - Page 2613

foobar2000 · 3rd September 2018, 13:08

gpu performance
@madshi hi madshi could you improve the efficiency of madvr, beacuse with 1080ti highest setting to upsale a common 480p video to 4k screen makes fps drops to less 10... that's nightmare, madvr eats up too much gpu, maybe it's due to efficiency problem?

mclingo · 3rd September 2018, 13:12

Quote:

Originally Posted by Sunset1982

ok, I reinstalled my system and now 60hz, Full RGB is working.

But HDR mode isn't triggering my tv to switch into HDR Mode.

Passtrough and HDR Metadata send is aktivated.

If I let madvr automaticly choose the hdr mode, it converts hdr to sdr and don't uses the tv's hdr mode too.

is anyone here using a amd card with a LG OLED? is this confirmed to work together?

My gtx switches into hdr and triggers my tv corretly...

AMD did break this quite recently but fixed it again with 18.8.1, i havent tried 18.8.2 yet as I never update drivers unless there is a good reason too these days.

Other than that you may still have something setup wrong.

other than general settings these are the only other prerequisites I am aware of with AMD cards.

- is you OLED setup in MADVR as 10bit or higher?
- do you have use Direct3D 11 for presentation (windows 7 and new) ticked - this is required.

Mine also stops working if either of these are not applied.

veggav · 3rd September 2018, 13:45

Quote:

Originally Posted by iSeries

Hi, I'm trying this with CRU - however, when I put in the horizontal front porch number from MadVR (1276), the font changes to red in CRU and won't let me click ok. Anyone know why?

You can play around with the numbers but I think the front porch is what it is.
There must be something wrong on your side somewhere.

Post a screenshot of the MadVR setting timings that work and what you are trying to do in CRU.

Sunset1982 · 3rd September 2018, 14:54

Quote:

- is you OLED setup in MADVR as 10bit or higher?
- do you have use Direct3D 11 for presentation (windows 7 and new) ticked - this is required.

Does it have to be in 10 Bit mode?

ABDO · 3rd September 2018, 15:14

Quote:

Originally Posted by sauma144

@madshi
Did you plan to create a SRGAN/ESRGAN like image doubler?

i do not think it is possible with today gpu power, srgan take much gpu power and alot of time to upscale one frame to 4x scale, topaz make fantastic srgan and denois upscale standalone app ( artificial intelligence Gigapixel ) it make amazing result, but as usual it is very slow and can not use in real time upscal, maybe some day madshi can use his magic and found way to make it run 100x faster

Warner306 · 3rd September 2018, 16:08

Quote:

Originally Posted by Sunset1982

ok, I reinstalled my system and now 60hz, Full RGB is working.

But HDR mode isn't triggering my tv to switch into HDR Mode.

Passtrough and HDR Metadata send is aktivated.

If I let madvr automaticly choose the hdr mode, it converts hdr to sdr and don't uses the tv's hdr mode too.

is anyone here using a amd card with a LG OLED? is this confirmed to work together?

My gtx switches into hdr and triggers my tv corretly...

Is your LG TV the active device in the madVR control panel? If the let madVR decide option is converting to SDR, it must not be reading HDR compatibility for the display. HDR compatibility should be indicated under the EDID data for the device in the control panel.

Klaus1189 · 3rd September 2018, 16:44

Quote:

Originally Posted by Sunset1982

ok, I reinstalled my system and now 60hz, Full RGB is working.

Did you get 3840x2160@60Hz RGB 10 bit out of HDMI port of your Nvidia GTX 1070??

Sunset1982 · 3rd September 2018, 16:49

Quote:

Originally Posted by Klaus1189

Did you get 3840x2160@60Hz RGB 10 bit out of HDMI port of your Nvidia GTX 1070??

no, just 23hz, 10bit, UHD or 8bit with 60hz

Sunset1982 · 3rd September 2018, 16:50

Quote:

Originally Posted by Warner306

Is your LG TV the active device in the madVR control panel? If the let madVR decide option is converting to SDR, it must not be reading HDR compatibility for the display. HDR compatibility should be indicated under the EDID data for the device in the control panel.

I will have a look. Maybe it is because it is going passthrough through my avr (denon X4200)

nevcairiel · 3rd September 2018, 17:01

Quote:

Originally Posted by Klaus1189

Did you get 3840x2160@60Hz RGB 10 bit out of HDMI port of your Nvidia GTX 1070??

This is an impossible combination with HDMI 2.0 on such cards. The physics won't let you.

Sunset1982 · 3rd September 2018, 17:28

Quote:

Originally Posted by nevcairiel

This is an impossible combination with HDMI 2.0 on such cards. The physics won't let you.

and still no HDMI 2.1 cards on the way... (2080 doesn't have 2.1, too)

Sunset1982 · 3rd September 2018, 17:30

Quote:

Originally Posted by mclingo

AMD did break this quite recently but fixed it again with 18.8.1, i havent tried 18.8.2 yet as I never update drivers unless there is a good reason too these days.

Other than that you may still have something setup wrong.

other than general settings these are the only other prerequisites I am aware of with AMD cards.

- is you OLED setup in MADVR as 10bit or higher?
- do you have use Direct3D 11 for presentation (windows 7 and new) ticked - this is required.

Mine also stops working if either of these are not applied.

ok, got it. Changed my display type to 10bit and now it works.

PirateIce · 3rd September 2018, 23:17

Quote:

Originally Posted by foobar2000

We could say the highest upscaling section in madvr surely is a monster, 1080ti basically deals with every games but it can't 100% smoothly run the ultimate upscaling setting at all, not even close. My friend just pre-ordered the 2080ti, but he doesn't think the new card could break the ice, madvr is already another 3DMark...

Quote:

Originally Posted by foobar2000

gpu performance
@madshi hi madshi could you improve the efficiency of madvr, beacuse with 1080ti highest setting to upsale a common 480p video to 4k screen makes fps drops to less 10... that's nightmare, madvr eats up too much gpu, maybe it's due to efficiency problem?

Here's a wild idea, theres a whole bunch of settings in Madvr, why not change some of them until performance works out? I can render 480p to 4k using ngu, because I checked the settings. Maybe then you'll stop reposting what is basically saying "You've worked on this for years and many people use it, but did you ever optimize it, in the YEARS of development??"....... yes foobar, it's very optimized, your settings however...

mclingo · 5th September 2018, 14:58

Quote:

Originally Posted by PirateIce

Here's a wild idea, theres a whole bunch of settings in Madvr, why not change some of them until performance works out? I can render 480p to 4k using ngu, because I checked the settings. Maybe then you'll stop reposting what is basically saying "You've worked on this for years and many people use it, but did you ever optimize it, in the YEARS of development??"....... yes foobar, it's very optimized, your settings however...

You crazy fool, surely there is a better way to configure MADVR to meet the requirements of your system without configuring MADVR to meet the requirements of your system.

Zaoshi · 5th September 2018, 15:34

Indeed there is. Buy better hardware.

mclingo · 5th September 2018, 16:14

sorry but MADVR default settings being very conservative as they are for obvious reasons, you would still need to configure MADVR to meet the requirements of your more powerful system as most of us already do.

Klaus1189 · 5th September 2018, 19:32

Are there any known issues in latest Nvidia drivers from 2018-08-27, like HDR not working, ...? If there is anything, does it depend on the OS and its version, like Win10 18.03?

tharjr · 6th September 2018, 02:09

Quote:

Originally Posted by Klaus1189

Are there any known issues in latest Nvidia drivers from 2018-08-27, like HDR not working, ...? If there is anything, does it depend on the OS and its version, like Win10 18.03?

HDR is not working for me. Using latest NVidia driver

ryrynz · 6th September 2018, 02:35

Quote:

Originally Posted by Zaoshi

Indeed there is. Buy better hardware.

Purchase fastest graphics card available, GeForce GTX 1080 Ti.

Install MadVR and set everything to maximum, surely my card can handle it.

It can't.

Complain about performance, madVR must need optimizing 'cos I have the bestest card.

Some say it's my settings, but surely not!

My face when it's suggested that I upgrade my card.

Asmodian · 6th September 2018, 03:33

Quote:

Originally Posted by tharjr

HDR is not working for me. Using latest NVidia driver

HDR works for me with 399.07, Win10 1803, and a 2017 LG OLED C7P.

3rd September 2018, 13:08	#52241 \| Link
foobar2000 Registered User Join Date: Aug 2018 Posts: 25	gpu performance @madshi hi madshi could you improve the efficiency of madvr, beacuse with 1080ti highest setting to upsale a common 480p video to 4k screen makes fps drops to less 10... that's nightmare, madvr eats up too much gpu, maybe it's due to efficiency problem?

5th September 2018, 15:34	#52255 \| Link
Zaoshi Registered User Join Date: Dec 2016 Posts: 14	Indeed there is. Buy better hardware.

5th September 2018, 16:14	#52256 \| Link
mclingo Registered User Join Date: Aug 2016 Posts: 1,348	sorry but MADVR default settings being very conservative as they are for obvious reasons, you would still need to configure MADVR to meet the requirements of your more powerful system as most of us already do.

5th September 2018, 19:32	#52257 \| Link
Klaus1189 Registered User Join Date: Feb 2015 Location: Bavaria Posts: 1,667	Are there any known issues in latest Nvidia drivers from 2018-08-27, like HDR not working, ...? If there is anything, does it depend on the OS and its version, like Win10 18.03?