RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY - Page 604

bugmen0t · 18th January 2013, 17:08

I am a BIG FAN of RipBot264 ... absolutely great work.

I was wondering if there was any plan to move the initial demux to the actual processing stage. Right now, you choose an input, and a chapter, and then the computer proceeds to do 5 minutes of processing before presenting you with a screen which lets you choose a filename and options.

The default options work for me just fine, which means that it is a 5 minute wait to enter a filename. When ripping multiple TV episodes, this can be hours just to set up the queue.

Is there any way you would consider allowing a way to enter the filename and accept whatever default would have happened if it went through the 5 minutes, and leave that initial processing to the actual transcode?

Thanks!

Atak_Snajpera · 18th January 2013, 17:21

Quote:

Originally Posted by Wishbringer

Ok, I know, Atak has no Win8, so he can't help,
but maybe another has found a solution.

I installed RipBot264 1.17.4 Preview under Win8Pro 64bit.
newest Haali, newest ffdshow (4499) and so on.
Several encodes went fine.
Issue with new Storage Space feature of Win8Pro (similar to Raids) still exists, but I switched back to Intel (BIOS) Raid, so it is solved.
Now I tried to encode a BluRay with DTS (15xx) to an AVCHD AC3 (640), with temporary use of FLAC.
When in preview, I see error that flac isn't recognized in avisynth.

To resolve Issue, I tried Codec-Pack from Shark007:
Now Flac is recognized, no problem. BUT Video ist topdown!
After deinstalling Sharks Pack and reinstalling Haali and ffdshow video is fine, but flac isn't recognized again.

Any suggestions?!
With Win7 this issue doesn't appear. I have several computers to test, but I want to have at least one with Win8 to test, even when I don't like Win8.

Your FLAC issue should be fixed in next version. (instead of DirectShowSource I will use independent BassAudio filter)

Quote:

can anyone point me to who made bepipe? maybe we can fix this?

I will try to replace that tool with something else in next version.

@Red Fish
Are you sure that you have enough space on C: partition? Is your movie correctly decrypted with latest version of AnyDVD HD?

@bugmen0t
I will think about it. I do not promise anything...

Red Fish · 18th January 2013, 17:35

Quote:

Originally Posted by Atak_Snajpera

@Red Fish
Are you sure that you have enough space on C: partition? Is your movie correctly decrypted with latest version of AnyDVD HD?
.

I have over 500 gb space on my C drive. The movie was decrypted with latest version of DVD fab. Is that an issue? As I mentioned others are working fine, just a few recent new ones. Perhaps different audio streams? Still kinda new to all this. Thanks

Atak_Snajpera · 18th January 2013, 18:18

Try again with ANYDVD HD to be sure.

DTS-HD MSTR · 18th January 2013, 21:53

@Red Fish

It looks like that your ArcSoft DTS decoder version can not handle 7.1 channel files.

Firminus · 18th January 2013, 23:55

I use the trim command on in the Trim area and it dose not trim the audio for the video, the GUI says it is, but media info and the file size says different.

GMJCZP · 19th January 2013, 07:05

Atak_Snajpera:

When I encoded the video (framesize of source video=704x480) always remains at 4:3, then I put in the command line --sar 1:1 to avoid this. It should be the default value 1:1. With other programs as TX264 and Bencos the result is fine.
Another thing: once more ask please check the duration of the audio when muxed with video, can be cut and only with YAMB to separate and reassemble to correct the problem. Thank you.

godfavor · 19th January 2013, 12:12

Hello,

I have a problem with Ripbot. I cannot encode anything, when I load a file and press encode it encodes the video instandly without an output. I downloaded the program several times reinstalled all codecs and required programs, everything on default but the same problem every time. I tried several different video files. I'm using windows 8 X64.

Thanks,

Atak_Snajpera · 19th January 2013, 12:25

ripbot always checks source aspect ratio . in your case madiainfo detected your file as 4/3 . in order to have correct aspect ratio during playback ripbot calculates correct sar value . in your case --sar 0.909:1000.

when you use 1:1 your video file will have incorrect proportions 1.46:1 . that kind of aspect ratio does not exist in movie industry.

Atak_Snajpera · 19th January 2013, 12:26

Quote:

Originally Posted by godfavor

Hello,

I have a problem with Ripbot. I cannot encode anything, when I load a file and press encode it encodes the video instandly without an output. I downloaded the program several times reinstalled all codecs and required programs, everything on default but the same problem every time. I tried several different video files. I'm using windows 8 X64.

Thanks,

check log folder

godfavor · 19th January 2013, 12:30

You mean the Job1_log.txt?

C:\>"C:\Users\Θεοχάρης\Documents\Ripbot\tools\avs2yuv\avs2yuv.exe" "C:\Temp\RipBot264temp\job1\job1.avs" -o - | "C:\Users\Θεοχάρης\Documents\Ripbot\tools\x264\x264_x64.exe" --crf 20 --stats "C:\Temp\RipBot264temp\job1\job1.stats" --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 181626 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --b-pyramid none --stdin y4m --output "C:\Temp\RipBot264temp\video.264" -

’¦ ©η©«ž£˜ ›œ¤ œε¤˜* ©œ Ÿβ©ž ¤˜ œ¤«¦§ε©œ* «ž¤ ΅˜Ÿ¦¨*©£β¤ž ›*˜›¨¦£γ ›ε©΅¦¬.

C:\>"C:\Users\Θεοχάρης\Documents\Ripbot\tools\mkvtoolnix\mkvmerge.exe" -o "C:\Users\Θεοχάρης\Desktop\Hugo (2011) 3D Half-SBS.mkv" --compression 0:none --title "Hugo (2011) 3D Half-SBS" --default-duration 0:24000/1001fps "C:\Temp\RipBot264temp\video.264" --forced-track 0:yes --language 0:ell -s 0 -D -A "C:\Temp\RipBot264temp\job1\Hugo (2011) 3D Half-SBS.ass"

’¦ ©η©«ž£˜ ›œ¤ œε¤˜* ©œ Ÿβ©ž ¤˜ œ¤«¦§ε©œ* «ž¤ ΅˜Ÿ¦¨*©£β¤ž ›*˜›¨¦£γ ›ε©΅¦¬.
-------------------------

Elapsed Time: 00h:00m:00s

Atak_Snajpera · 19th January 2013, 12:34

move ripbot folder to location without national characters in path. for example c:/program files(x86)/ripbot264

godfavor · 19th January 2013, 12:48

Quote:

Originally Posted by Atak_Snajpera

move ripbot folder to location without national characters in path. for example c:/program files(x86)/ripbot264

Ok, that did it thanks! I had to move the video file also.

Wishbringer · 20th January 2013, 16:32

Quote:

Originally Posted by Atak_Snajpera

Your FLAC issue should be fixed in next version. (instead of DirectShowSource I will use independent BassAudio filter). I will try to replace that tool with something else in next version

Thanks alot!

AZfilma · 21st January 2013, 00:10

any fix for gathering information? I have read all posts in this thread and have tried all suggestions but nothing. I have windows server 2008 x64. Rip bot stuck on gathering information. I use ripbot in my desktop pc and my laptop both have windows 8 installed and everything is ok but in my vps not work.

Kaminaji · 21st January 2013, 17:50

Quote:

Originally Posted by Kaminaji

Hey everybody

I have audio sync problems

I have a m2ts (VC-1) file and I just want to get a mkv file with best quality.

But everytime I do the preview the audio is at the beginning like 3 seconds ahead and by the time the delay gets worse and worse.

Can anybody help?

It really drives me crazy... maybe you guys missed my post... hope you can help me. Because if not you, who?

Guest · 21st January 2013, 18:38

Quote:

Originally Posted by Kaminaji

It really drives me crazy... maybe you guys missed my post... hope you can help me. Because if not you, who?

Post a link to the first 100MB of the m2ts file. Use mediafire.com or some other reputable upload site. You can cut it with DGSplit.

With that, I'll be able to determine if the issue is with the stream or your processing. What VC-1 decoder are you using?

Kaminaji · 22nd January 2013, 19:49

Quote:

Originally Posted by neuron2

Post a link to the first 100MB of the m2ts file. Use mediafire.com or some other reputable upload site. You can cut it with DGSplit.

With that, I'll be able to determine if the issue is with the stream or your processing. What VC-1 decoder are you using?

I am using libavcodec. Should I change it into wmv9?

Here is the link to the first 100 MB:

http://www.mediafire.com/?0wqkbwq6mei5baa

Atak_Snajpera · 22nd January 2013, 19:59

Quote:

Originally Posted by Kaminaji

I am using libavcodec. Should I change it into wmv9?

Here is the link to the first 100 MB:

http://www.mediafire.com/?0wqkbwq6mei5baa

add this to script

Kaminaji · 22nd January 2013, 20:16

Quote:

Originally Posted by Atak_Snajpera

add this to script

Thank you soooo much! I never noticed, that the framerate is set to 23.976...

18th January 2013, 17:08	#12061 \| Link
bugmen0t Banned Join Date: May 2012 Location: _Lies\|Greed\|Misery_ Posts: 114	Move the Demux?!?! I am a BIG FAN of RipBot264 ... absolutely great work. I was wondering if there was any plan to move the initial demux to the actual processing stage. Right now, you choose an input, and a chapter, and then the computer proceeds to do 5 minutes of processing before presenting you with a screen which lets you choose a filename and options. The default options work for me just fine, which means that it is a 5 minute wait to enter a filename. When ripping multiple TV episodes, this can be hours just to set up the queue. Is there any way you would consider allowing a way to enter the filename and accept whatever default would have happened if it went through the 5 minutes, and leave that initial processing to the actual transcode? Thanks!

18th January 2013, 18:18	#12064 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,816	Try again with ANYDVD HD to be sure. __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

18th January 2013, 23:55	#12066 \| Link
Firminus Registered User Join Date: Jul 2011 Posts: 7	Trim Command not working I use the trim command on in the Trim area and it dose not trim the audio for the video, the GUI says it is, but media info and the file size says different.

19th January 2013, 07:05	#12067 \| Link
GMJCZP Registered User Join Date: Apr 2010 Location: I have a statue in Hakodate, Japan Posts: 744	Atak_Snajpera: When I encoded the video (framesize of source video=704x480) always remains at 4:3, then I put in the command line --sar 1:1 to avoid this. It should be the default value 1:1. With other programs as TX264 and Bencos the result is fine. Another thing: once more ask please check the duration of the audio when muxed with video, can be cut and only with YAMB to separate and reassemble to correct the problem. Thank you. Last edited by GMJCZP; 19th January 2013 at 08:13. Reason: Added framesize of source video

19th January 2013, 12:12	#12068 \| Link
godfavor Registered User Join Date: Jan 2013 Posts: 3	Hello, I have a problem with Ripbot. I cannot encode anything, when I load a file and press encode it encodes the video instandly without an output. I downloaded the program several times reinstalled all codecs and required programs, everything on default but the same problem every time. I tried several different video files. I'm using windows 8 X64. Thanks, Last edited by godfavor; 19th January 2013 at 12:16.

18th January 2013, 21:53	#12065 \| Link
DTS-HD MSTR DTS Enthusiast Join Date: Dec 2011 Posts: 18	@Red Fish It looks like that your ArcSoft DTS decoder version can not handle 7.1 channel files.

19th January 2013, 12:25	#12069 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,816	ripbot always checks source aspect ratio . in your case madiainfo detected your file as 4/3 . in order to have correct aspect ratio during playback ripbot calculates correct sar value . in your case --sar 0.909:1000. when you use 1:1 your video file will have incorrect proportions 1.46:1 . that kind of aspect ratio does not exist in movie industry. __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper Last edited by Atak_Snajpera; 19th January 2013 at 12:44.

19th January 2013, 12:30	#12071 \| Link
godfavor Registered User Join Date: Jan 2013 Posts: 3	You mean the Job1_log.txt? C:\>"C:\Users\Θεοχάρης\Documents\Ripbot\tools\avs2yuv\avs2yuv.exe" "C:\Temp\RipBot264temp\job1\job1.avs" -o - \| "C:\Users\Θεοχάρης\Documents\Ripbot\tools\x264\x264_x64.exe" --crf 20 --stats "C:\Temp\RipBot264temp\job1\job1.stats" --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 181626 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --b-pyramid none --stdin y4m --output "C:\Temp\RipBot264temp\video.264" - ’¦ ©η©«ž£˜ ›œ¤ œε¤˜* ©œ Ÿβ©ž ¤˜ œ¤«¦§ε©œ* «ž¤ ΅˜Ÿ¦¨©£β¤ž ›˜›¨¦£γ ›ε©΅¦¬. C:\>"C:\Users\Θεοχάρης\Documents\Ripbot\tools\mkvtoolnix\mkvmerge.exe" -o "C:\Users\Θεοχάρης\Desktop\Hugo (2011) 3D Half-SBS.mkv" --compression 0:none --title "Hugo (2011) 3D Half-SBS" --default-duration 0:24000/1001fps "C:\Temp\RipBot264temp\video.264" --forced-track 0:yes --language 0:ell -s 0 -D -A "C:\Temp\RipBot264temp\job1\Hugo (2011) 3D Half-SBS.ass" ’¦ ©η©«ž£˜ ›œ¤ œε¤˜* ©œ Ÿβ©ž ¤˜ œ¤«¦§ε©œ* «ž¤ ΅˜Ÿ¦¨©£β¤ž ›˜›¨¦£γ ›ε©΅¦¬. ------------------------- Elapsed Time: 00h:00m:00s

19th January 2013, 12:34	#12072 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,816	move ripbot folder to location without national characters in path. for example c:/program files(x86)/ripbot264 __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

21st January 2013, 00:10	#12075 \| Link
AZfilma Registered User Join Date: Jan 2013 Posts: 2	any fix for gathering information? I have read all posts in this thread and have tried all suggestions but nothing. I have windows server 2008 x64. Rip bot stuck on gathering information. I use ripbot in my desktop pc and my laptop both have windows 8 installed and everything is ok but in my vps not work.