BatchEncodeM2V 00014c alpha with HCENC support - Page 6

Trahald · 3rd April 2005, 20:03

@jarthel
Dunno.. probably not since im ending production soon

@d3s7
fixed in 00013

Trahald · 19th April 2005, 18:38

00014 alpha out. see top post for info.

Just to clarify how the .vif process is done

when material is ntsc/film pulldown is always needed.. the .mpv.m2v is written and the vif is created with the data collected during pulldown

for pal/ntsc@29.97fps - with the create vif option on.. pulldown is run but no .mpv.m2v created. only is the data collected to create the .vif file.

this saves lots of time during script import for scenarist.

the vif file doesnt contain fps info.. just pointers to where the pictures/gops start within the video and other stuff. vifs are the same for 2.6->3.0 ( i assume also 3.1 )

mrslacker · 19th April 2005, 22:47

Thanks for ccefront support, and, uhmmm.... the other stuff.

Angelus · 22nd April 2005, 16:03

Sorry for posting this but I'm clueless as the the CCEFront.ini file that we're supposed to have? Anyone have an example of it? I tried using that with BatchEncodeM2V but it gives an error saying it can't open up the ecl.

Trahald · 22nd April 2005, 19:52

00014b is posted..

foxmid · 10th May 2005, 22:43

I installed BathEncode and can't even run it. I just get the application failed to initialize properly (0xc0000135) error upon launch. I browsed the program folder and configured cceroba, with no change in results.

Also uninstalled and reinstalled. XP Pro - patched & virus/spyware free, running on very decent hardware and specs. I do have a host of DVD type utilities installed.. Is your tool based on any outside libraries I need to install?

Thanks

D3s7 · 10th May 2005, 22:55

you need the .net framework and dll's i believe

check the batchifoupdate thread.. there's a link to the dll's needed for that and i believe they are the same

foxmid · 16th May 2005, 23:00

Thanks - just went to M$ site and got dot net framework from the download center. Works like a champ, now..

Question for Trahald - Have you had a chance to work on the "vob must be even number of frames" error in Scenarist? I wanna make sure I've got the latest version before running the re-encode again.

Thanks

D3s7 · 16th May 2005, 23:44

Quote:

Originally posted by foxmid
Have you had a chance to work on the "vob must be even number of frames" error in Scenarist? I wanna make sure I've got the latest version before running the re-encode again.

Thanks

That's been in there for a long time... and infact, it's in the new BatchCCEWS too

foxmid · 22nd May 2005, 08:49

Thanks Ds37 - I will run my project through again, and this time, maybe it will compile..

Does BatchEncodeM2V require a specific version of CCE? I'm using CCE SP 2.5, and all it wants to do is launch, but no encoding is happening.

Zeul · 22nd May 2005, 12:50

All version of CCE are supported by BatchEncode

Ripe73 · 22nd May 2005, 13:26

im not sure how to encode PAL Interlaced with batchencode,there is no "altenate scan" on Batchcce i enable "top field first" and "alternate scan" and everything work nice,what settings for batchencode?

Zeul · 22nd May 2005, 13:47

There is a box marked progressive and one for zig-zag. Just leave these unselected and then interlaced encoding will be assumed

onebyside · 24th May 2005, 19:08

Quote:

Originally posted by foxmid
I'm using CCE SP 2.5, and all it wants to do is launch, but no encoding is happening.

I'm having the same problem....suggestions?

thanks

Trahald · 25th May 2005, 05:52

i'll take a look at it.. been very busy.

foxmid · 27th May 2005, 23:07

I don't know what to suggest, as I'm still having the same issue.

I have installed the latest EclCCE file and pointed BEM to it, still same issue.

I have pointed EclCCE to different CCE version, same problem.

I had wondered if it was maybe a version thing with EclCCE, I've tried whatever version is included with NuMenu4U, and the latest that can be downloaded from the EclCCE website.

Maybe someone else will have better results with these troubleshooting steps than I have? I don't know, but figured I'd post them as a starting point.

jarthel · 28th May 2005, 06:35

batchencode won't run anymore. I click on the icon and nothing happens. I checked the task manager to see if it was somehow running but I can't see it.

I uninstalled and reinstalled it to no avail. I rebooted the PC and run it again and still nothing.

thanks for the help.

D3s7 · 28th May 2005, 18:23

apps just don't stop working..

what did you install (hardware or software) or uninstall since it last worked and now?

my guess would be the .net extensions

Trahald · 28th May 2005, 21:04

Quote:

Originally posted by foxmid
Does BatchEncodeM2V require a specific version of CCE? I'm using CCE SP 2.5, and all it wants to do is launch, but no encoding is happening.

should be fixed now in 00014c

foxmid · 29th May 2005, 07:56

thanks, now I get CCE to fire up and start the encode - but suddenly I'm getting this error when trying to encode. I've never had any trouble with CCE before..

Should I try a different version of CCE? I am only using 2.50 as it is rumored to be faster on an Athlon system. Is this an urban legend?

Thanks for your help - I was so excited when CCE actually started encoding!

3rd April 2005, 20:03	#101 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	@jarthel Dunno.. probably not since im ending production soon @d3s7 fixed in 00013 __________________ ...yeah...but...why on earth would I compare apples with apples?

19th April 2005, 18:38	#102 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	00014 alpha out. see top post for info. Just to clarify how the .vif process is done when material is ntsc/film pulldown is always needed.. the .mpv.m2v is written and the vif is created with the data collected during pulldown for pal/ntsc@29.97fps - with the create vif option on.. pulldown is run but no .mpv.m2v created. only is the data collected to create the .vif file. this saves lots of time during script import for scenarist. the vif file doesnt contain fps info.. just pointers to where the pictures/gops start within the video and other stuff. vifs are the same for 2.6->3.0 ( i assume also 3.1 ) __________________ ...yeah...but...why on earth would I compare apples with apples? Last edited by Trahald; 19th April 2005 at 18:41.

19th April 2005, 22:47	#103 \| Link
mrslacker Junior Slacker Join Date: May 2004 Location: End-World Posts: 296	Thanks for ccefront support, and, uhmmm.... the other stuff. __________________ There's no place like 127.0.0.1

22nd April 2005, 19:52	#105 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	00014b is posted.. __________________ ...yeah...but...why on earth would I compare apples with apples?

10th May 2005, 22:55	#107 \| Link
D3s7 ScenAid Join Date: Mar 2003 Posts: 1,623	you need the .net framework and dll's i believe check the batchifoupdate thread.. there's a link to the dll's needed for that and i believe they are the same __________________ ScenAid May just replace the dog as man's best friend http://www.scenaid.com

22nd April 2005, 16:03	#104 \| Link
Angelus Registered User Join Date: Apr 2003 Posts: 511	Sorry for posting this but I'm clueless as the the CCEFront.ini file that we're supposed to have? Anyone have an example of it? I tried using that with BatchEncodeM2V but it gives an error saying it can't open up the ecl.

10th May 2005, 22:43	#106 \| Link
foxmid Registered User Join Date: Aug 2003 Posts: 93	I installed BathEncode and can't even run it. I just get the application failed to initialize properly (0xc0000135) error upon launch. I browsed the program folder and configured cceroba, with no change in results. Also uninstalled and reinstalled. XP Pro - patched & virus/spyware free, running on very decent hardware and specs. I do have a host of DVD type utilities installed.. Is your tool based on any outside libraries I need to install? Thanks

16th May 2005, 23:00	#108 \| Link
foxmid Registered User Join Date: Aug 2003 Posts: 93	Thanks - just went to M$ site and got dot net framework from the download center. Works like a champ, now.. Question for Trahald - Have you had a chance to work on the "vob must be even number of frames" error in Scenarist? I wanna make sure I've got the latest version before running the re-encode again. Thanks

22nd May 2005, 08:49	#110 \| Link
foxmid Registered User Join Date: Aug 2003 Posts: 93	Thanks Ds37 - I will run my project through again, and this time, maybe it will compile.. Does BatchEncodeM2V require a specific version of CCE? I'm using CCE SP 2.5, and all it wants to do is launch, but no encoding is happening.

22nd May 2005, 12:50	#111 \| Link
Zeul Registered User Join Date: Nov 2002 Location: England Posts: 1,361	All version of CCE are supported by BatchEncode

22nd May 2005, 13:26	#112 \| Link
Ripe73 DVDR Freak! Join Date: Oct 2001 Location: Sweden Posts: 351	im not sure how to encode PAL Interlaced with batchencode,there is no "altenate scan" on Batchcce i enable "top field first" and "alternate scan" and everything work nice,what settings for batchencode? __________________ Drugs,Sex & Encoding

22nd May 2005, 13:47	#113 \| Link
Zeul Registered User Join Date: Nov 2002 Location: England Posts: 1,361	There is a box marked progressive and one for zig-zag. Just leave these unselected and then interlaced encoding will be assumed

25th May 2005, 05:52	#115 \| Link
Trahald Wewkiee Join Date: Feb 2002 Location: kashyyyk Posts: 2,269	i'll take a look at it.. been very busy. __________________ ...yeah...but...why on earth would I compare apples with apples?

27th May 2005, 23:07	#116 \| Link
foxmid Registered User Join Date: Aug 2003 Posts: 93	I don't know what to suggest, as I'm still having the same issue. I have installed the latest EclCCE file and pointed BEM to it, still same issue. I have pointed EclCCE to different CCE version, same problem. I had wondered if it was maybe a version thing with EclCCE, I've tried whatever version is included with NuMenu4U, and the latest that can be downloaded from the EclCCE website. Maybe someone else will have better results with these troubleshooting steps than I have? I don't know, but figured I'd post them as a starting point.

28th May 2005, 06:35	#117 \| Link
jarthel plebian Join Date: Nov 2001 Posts: 775	batchencode won't run anymore. I click on the icon and nothing happens. I checked the task manager to see if it was somehow running but I can't see it. I uninstalled and reinstalled it to no avail. I rebooted the PC and run it again and still nothing. thanks for the help.

28th May 2005, 18:23	#118 \| Link
D3s7 ScenAid Join Date: Mar 2003 Posts: 1,623	apps just don't stop working.. what did you install (hardware or software) or uninstall since it last worked and now? my guess would be the .net extensions __________________ ScenAid May just replace the dog as man's best friend http://www.scenaid.com

29th May 2005, 07:56	#120 \| Link
foxmid Registered User Join Date: Aug 2003 Posts: 93	thanks, now I get CCE to fire up and start the encode - but suddenly I'm getting this error when trying to encode. I've never had any trouble with CCE before.. Should I try a different version of CCE? I am only using 2.50 as it is rumored to be faster on an Athlon system. Is this an urban legend? Thanks for your help - I was so excited when CCE actually started encoding! Last edited by foxmid; 29th May 2005 at 08:30.