Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion.

Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules.

 

Go Back   Doom9's Forum > General > Audio encoding

Reply
 
Thread Tools Search this Thread Display Modes
Old 25th November 2004, 15:13   #1  |  Link
lancer
Registered User
 
Join Date: Dec 2002
Location: leeds england
Posts: 94
wav to dolby 2.0 encode question

I'm going to have a crack at extracting my original wav recording and turn it into a 5.1 or at least a surround track in vegas.

I've seen the guides on the forum here but a question occured to me.

when I originally recorded the sound in virtualdub_sync, I recorded it as a straight 48khz 16 bit stereo wav file. as per the offered choices on vdub.

at the time I ignored all other options, but looking at vdub today, (two years after the capture was made)I notice further down now that there is the option for PCM. as I recorded wav stereo, would this suggest that there is nothing for me to extract to make it a surround track, or would it still be embedded in there somewhere?

when I pipe it through my speakers and select and surround 2.0 dolby pro logic I do get some rear surrounds. is that the PCM at work? am I right in assuming that PCM info is embedded in stereo tracks or would I have to rerecord the audio?
__________________
when someone says yes it usually means no or maybe with a perhaps thrown in for good measure
lancer is offline   Reply With Quote
Old 25th November 2004, 16:00   #2  |  Link
ursamtl
Registered User
 
Join Date: May 2004
Location: Montreal
Posts: 729
Hi lancer,

Short answer: PCM is simply a way of digitally storing the sound data, but it has no direct bearing on the information needed to produce stereo or surround, so if your source file is real, 2-channel stereo, you should be ok.

Explanation: Stereo to surround conversions basically fall into two categories (or a combination of the two):

1. Those that extract existing audio spatial information
2. Those that impose artificial audio spatial information

All you need to do the first is a stereo track. The spatial information is stored in a signal that is derived by "subtracting" one channel from the other (inverting the phase of one channel and combining it with the other. Sounds that are the same cancel each other out; those that are different remain).

As for the second approach, this amounts to adding artificial effects processing such as reverb. In this case, your source could even be mono and you'd be able to come up with some sort of surround.

Steve.
ursamtl is offline   Reply With Quote
Old 25th November 2004, 17:05   #3  |  Link
lancer
Registered User
 
Join Date: Dec 2002
Location: leeds england
Posts: 94
thanks for that, I thought that might be the case, I really didn't want to have to re-record the sound again.
__________________
when someone says yes it usually means no or maybe with a perhaps thrown in for good measure
lancer is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 22:52.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.