Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
6th March 2012, 03:27 | #12561 | Link |
Registered User
Join Date: Jun 2006
Posts: 452
|
For me this build did not fix the freezing on switching files neither.
Problem remains the same and is almost 100% repeatable. I'll have to disable FSE in Madvr or use EVR with RGB input. Last edited by Pat357; 6th March 2012 at 03:29. |
6th March 2012, 04:49 | #12563 | Link |
Registered User
Join Date: Mar 2009
Posts: 962
|
Yes, previously with 0.81 and before I got a freeze with FSE whenever changing files after a refresh rate change, like I said before, and it was fixed by using D3D11. Now it seems the freeze is different, it always happens (not just after refresh rate switch), and D3D11 doesn't fix it. It's every time jumping from file to file. I'm searching for the instructions to make a report, anyone wanna make my life easier? It's not on the OP nor the txt files.
Also, is this happening to most people? Anyone can confirm that this never happens to them?
__________________
MSI MAG X570 TOMAHAWK WIFI, Ryzen 5900x, RTX 3070, Win 10-64. Pioneer VSX-LX503, LG OLED65C9 |
6th March 2012, 05:06 | #12564 | Link |
Registered User
Join Date: Mar 2009
Posts: 962
|
OK, report and debug log here http://www.mediafire.com/?65mdlko1revfazb
Using hardware in my sig except an ATI 4670 instead of 5770.
__________________
MSI MAG X570 TOMAHAWK WIFI, Ryzen 5900x, RTX 3070, Win 10-64. Pioneer VSX-LX503, LG OLED65C9 |
6th March 2012, 06:30 | #12565 | Link | ||
Registered User
Join Date: Mar 2009
Posts: 962
|
Quote:
Quote:
__________________
MSI MAG X570 TOMAHAWK WIFI, Ryzen 5900x, RTX 3070, Win 10-64. Pioneer VSX-LX503, LG OLED65C9 |
||
6th March 2012, 06:50 | #12566 | Link | ||
Registered User
Join Date: Oct 2010
Posts: 42
|
Quote:
Also, I finally found my MoC DVD of Nosferatu, I remember having to deinterlace it when I last watched it -- sure enough it has weird cadence changes in certain spots so I included a sample of it, let me know if you need more. Quote:
|
||
6th March 2012, 06:52 | #12567 | Link | |
Registered User
Join Date: Mar 2009
Posts: 3,646
|
Andy, I think you missed his reply to you earlier in the conversation.
Quote:
It's the same issue I've been experiencing and it's a issue with MPC-HC. |
|
6th March 2012, 07:02 | #12568 | Link |
Registered User
Join Date: Mar 2009
Posts: 962
|
Oh, I understood his, but I misunderstood your issue apparently. You were talking about flush settings and how it affects and makes it more or less likely. My freezes happen every time in the situations I described above.
__________________
MSI MAG X570 TOMAHAWK WIFI, Ryzen 5900x, RTX 3070, Win 10-64. Pioneer VSX-LX503, LG OLED65C9 |
6th March 2012, 07:33 | #12569 | Link |
Registered User
Join Date: Mar 2009
Posts: 3,646
|
Madshi, I've retested with 0.81 with version Aleksoids's 1 and 2 builds and build 2 actually fixes it. However 0.82 introduces a new problem when switching to the next file, I thought it was the same issue.
It shows up differently, a smaller MPC-HC window displays with black background as it hangs. All builds of MPC are experiencing this issue so it's MadVR related. My trace reports I made with those two builds should hopefully help you discover the problem. Cheers Andy! |
6th March 2012, 07:43 | #12570 | Link |
Registered User
Join Date: Mar 2009
Posts: 962
|
Thanks, I'll test that build. D3D11 fixed it for me with 0.81 and previous, FWIW. Could you see if it does for you? Also, it only happened after the first file skip after a refresh rate change. After it froze one time and MPC-HC was closed, it didn't happen again until the next refresh change.
__________________
MSI MAG X570 TOMAHAWK WIFI, Ryzen 5900x, RTX 3070, Win 10-64. Pioneer VSX-LX503, LG OLED65C9 |
6th March 2012, 07:48 | #12571 | Link |
Registered User
Join Date: Mar 2009
Posts: 3,646
|
I don't do any refresh rate changes but this does sound like the same issue, once it happened the first time it's hard to duplicate which is why I reboot every time to test it.
It's just unlucky that 0.82 introduced a new problem which appears at first glance similar to the MPC issue. Stick with 0.81 for the time being if that fixes it for you with MPC MadVR build 2, Madshi will likely hammer out a new version fairly promptly after he wakes up. Last edited by ryrynz; 6th March 2012 at 07:50. |
6th March 2012, 07:49 | #12572 | Link |
Registered User
Join Date: Mar 2009
Posts: 962
|
Thanks, will try those builds.
EDIT: confirmed that it's been fixed with 0.81.
__________________
MSI MAG X570 TOMAHAWK WIFI, Ryzen 5900x, RTX 3070, Win 10-64. Pioneer VSX-LX503, LG OLED65C9 Last edited by Andy o; 6th March 2012 at 08:07. |
6th March 2012, 09:06 | #12573 | Link | ||||||||
Registered Developer
Join Date: Sep 2006
Posts: 9,140
|
Quote:
Will be fixed in the next build. Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Ok, will look if I can do something about those freezes now... |
||||||||
6th March 2012, 09:47 | #12575 | Link |
Registered Developer
Join Date: Mar 2010
Location: Hamburg/Germany
Posts: 10,342
|
In one of the freeze reports posted by users, you can see the decoder actually creating a new D3D instance, which happens when loading the graph (The one with the IntelQuickSyncDecoder.dll reference)
Why would madVR still be closing down its old instance while the graph is already initializing a new decoder? Seems rather odd to me.
__________________
LAV Filters - open source ffmpeg based media splitter and decoders |
6th March 2012, 10:27 | #12576 | Link | |
Registered Developer
Join Date: Sep 2006
Posts: 9,140
|
Quote:
I'm not 100% sure if the freeze report with the "Intel Quicksync" reference (the one you're refering to) is also caused by the "display mode changed" event. It doesn't look that way at a quick glance - after all why should "createQuickSync" be called when the display mode has changed? But who knows. At least it seems that the freeze is gone in Aleksoid's test build in which he removed the Direct3D9 creation in the display change event handler. |
|
6th March 2012, 12:50 | #12578 | Link |
Registered User
Join Date: Aug 2008
Posts: 176
|
madshi
Thank you for .82! For this sample (NTSC DVD film) http://dl.dropbox.com/u/43376972/SD%20%281%29-001.mkv Settings: force film mode if in doubt, activate deinterlacing, but OSD says that deinter is off (upstream)! So deinterlacing is not on automatically? |
6th March 2012, 14:00 | #12580 | Link | |
Registered Developer
Join Date: Sep 2006
Posts: 9,140
|
Quote:
Next try: http://madshi.net/madVR82d.zip Aleksoid also appears to have fixed the other freeze problem and moves his changes to SVN. So as soon as MPC-HC revision 4128 is available, please retest. E.g. use XhmikosR's builds . |
|
Tags |
direct compute, dithering, error diffusion, madvr, ngu, nnedi3, quality, renderer, scaling, uhd upscaling, upsampling |
Thread Tools | Search this Thread |
Display Modes | |
|
|