madVR - high quality video renderer (GPU assisted)

[Anakunda]

install.bat in both madVR 0.87.20 - 21 gives me install error (failed to load madVR.ax and madVR64.ax)
Is there additional system requirement?

[Damien147]

Originally Posted by huhn

could you post a OSD sreen?


[/url]

http://i57.tinypic.com/2s9ejac.png

[Anime Viewer]

Originally Posted by Anakunda

install.bat in both madVR 0.87.20 - 21 gives me install error (failed to load madVR.ax and madVR64.ax)
Is there additional system requirement?

Did you right-click on install.bat and choose "Run as Administrator" when you ran it?

[khanmein]

Originally Posted by SecurityBunny

As far as my testing has gone, x64 MPC-HC (1.7.8.156) with native lav filters works perfectly fine with x64 MadVR (0.87.21). Just the later nvidia display drivers (350.05 & 350.12) crash when going into windowed fullscreen. Also causing the video player to crash or report madvr direct x initialization failure. This behavior only occurs with windowed fullscreen, exclusive fullscreen seems to function just fine.

Downgrading nvidia driver to 347.88, both windowed and exclusive fullscreen function as intended with x64 versions.

latest nightly should be 152 rite? https://nightly.mpc-hc.org/ where u get 156??

x64 mpc-hc v1.7.8.152 + LAVFilters v0.64.0-51 + madVR v0.87.21 + Nvidia 350.12 + win 8.1 pro + GTX 970 working with windowed fullscreen.

now reclock 1.8.8.4 not support x64. how to enable reclock on x64??

[ryrynz]

Originally Posted by khanmein;1717595latest

nightly should be 152 rite? https://nightly.mpc-hc.org/ where u get 156??

Few page back.

Originally Posted by kasper93

Seems to work fine. Test build for all folks before it gets to nightly https://www.dropbox.com/s/lrmrdd2e3s..._madVR.7z?dl=1

Originally Posted by khanmein

now reclock 1.8.8.4 not support x64. how to enable reclock on x64??

You can't.

[Anakunda]

Originally Posted by Anime Viewer

Did you right-click on install.bat and choose "Run as Administrator" when you ran it?

Strange I run it from console with admin rights and it gives this error. Run as admin from explorer succeed.

[khanmein]

@ryrynz thanks i stick with .152 cos my fifa 15 performed quite smooth on 350.12 compare with 347.88, 347.90 & 350.05

[Hprd]

Originally Posted by BetA13

Yay... i just tested needi3 with the new NV Drivers, and ITS FIXED

Finally i can use Needi3 without artefacts..

It's better than before, but there's still small artefacts once and a while. Problem isn't completely solved I think...

[huhn]

Originally Posted by Damien147

http://i57.tinypic.com/2s9ejac.png

the screen says this isn't fullscreen.

what player are you using?

[iSunrise]

Originally Posted by Damien147

http://i57.tinypic.com/2s9ejac.png

Your movie is reported as 1920x1040 and your target rectangle (that is the actual output resolution of the player window) is only 1902x1030, which is lower in both width and in height, so it's perfectly fine that madVR has to downscale.

The real question is, why do you mimic fullscreen playback by using windowed playback with borders? If you would either use real fullscreen or even fullscreen exclusive and your actual monitor has 1920x1080 resolution, then you wouldn't have to downscale.

Originally Posted by SecurityBunny

Perhaps it has something to do with my graphics card architecture? Using a kepler GTX 780 classified. Also on windows 10 technical preview build 10049. But as previously stated, nvidia driver 347.88 functions fine. Just the later ones crash in windowed fullscreen.

Windows 10 is not even RTM, so bugs are expected. Not sure if madshi already cares enough to fix it, since it's not a finalized OS. I know I wouldn't.

[Shayne]

Is there any new guides for 64 bit setup? It is nice to see this come, thankz for all u do. I have been using MPC-HC, haali, MadVR, lav video and ac3 audio. Direction, link to a 64 bit setup guide would be appreciated.

Regards

[ryrynz]

Madshi, I'm seeing some dithering on pure blacks when the trade quality option 'use DXVA chroma upscaling' is enabled when doing native DXVA decoding on my HD4000
giving some pixels what would be with the other chroma upscalers, 0,0,0 a value of 0,0,1.

Might I suggest maybe that those use DXVA chroma options are not enabled by default? Because at least on Intel graphics the chroma upscaling is god awful nearest neighbor and the visual difference is night and day.

Any chance of putting (not recommended) beside the nearest neighbor GPU setting BTW? Just so people stay clear of it if they don't know what they're doing? I do wonder if really that's even useful aside from some sort of testing.

Also using nearest neighbor doesn't result in the black dithering color change even though it likely is the same sort of process.

Originally Posted by Shayne

Is there any new guides for 64 bit setup? It is nice to see this come, thankz for all u do. I have been using MPC-HC, haali, MadVR, lav video and ac3 audio. Direction, link to a 64 bit setup guide would be appreciated.

Well the 64 bit build only just came out, so not sure why you expect there to be a guide.. but here's one for ya.

Download MPC-HC x64, Download MadVR. Install both & enjoy. PS ditch Haali.

[Shayne]

Originally Posted by ryrynz

Well the 64 bit build only just came out, so not sure why you expect there to be a guide.. but here's one for ya.

Download MPC-HC x64, Download MadVR. Install both & enjoy. PS ditch Haali.

Thankz for the second line.

Regards

[Vyral]

@Shayne

I've made a complete reinstall of MPC-HC, madVR and XYSubFilter in 64bit yesterday. Here some tips to help you :
- Before deleting the previous version of madVR, be sure to backup the settings.bin and restore it in the new version ;
- MPC-HC settings are stored in the registry and shared between the 32 and 64bit version, so no problem here. However, LAVFilters settings are not saved with MPC-HC. Make a backup of your LAVFilters settings.

[sneaker_ger]

madVR also saves settings in the registry (on top of saving them in the settings.bin file).

[Damien147]

Originally Posted by huhn

the screen says this isn't fullscreen.

what player are you using?

mpc-hc(just turned 64bit)

Originally Posted by iSunrise

Your movie is reported as 1920x1040 and your target rectangle (that is the actual output resolution of the player window) is only 1902x1030, which is lower in both width and in height, so it's perfectly fine that madVR has to downscale.

The real question is, why do you mimic fullscreen playback by using windowed playback with borders? If you would either use real fullscreen or even fullscreen exclusive and your actual monitor has 1920x1080 resolution, then you wouldn't have to downscale.

Oops!I took the pic like that because image> doesn't show up in fullscreen.So I guess it's only temporary because of what you've explained,my bad.

[Anatasia]

Originally Posted by tobindac

I figured this artifact appears with chroma upscaling set to NNEDI3.

Me too, W8.1, single R9 290X and latest stable driver. Also luma upscaling with NNEDI 3 seems to make the screen a little darker in exclusive mode. I'll try the 15.3 beta driver tomorrow to see whether it's gone or not

[obieobieobie]

Symantec has told me they have removed the false positive detection of mvrSettings32.dll

[JPulowski]

Currently using NVIDIA GTX690 with 350.12 WHQL driver. The NNEDI3 artifact issue seems to be fixed for 64-bit madVR. Did not test it yet with 32-bit.

Also I have some questions:

1. What is the optimal way of getting maximum performance for video playback from multi-gpu/SLI cards?
2. Are "Use a separate device for presentation" and "Use a separate device for DXVA processing" options related with multi-gpu somehow? If not what are they exactly?

Thanks.

[bejita7]

Oh, looks like this issue (http://bugs.madshi.net/view.php?id=250) is fixed in 350.12 WHQL. GTX 760, madVR x64.