DiAVC decoder, yet another fast H.264 high profile decoder - Page 49

sneaker_ger · 17th July 2010, 14:57

Quote:

Originally Posted by Stephen R. Savage

sneaker_ger, MPC-HC is run in reduced privileges mode, so it can not gain write access to the registry keys that store the machine code and password. You can read about this a few pages back when I described my difficulties with the DRM. The display field in the filter properties is independent of the code that validates the activation, so you should not have any problems using DiAVC.

Edit: Actually, this may not apply to Windows XP (developer response needed). However, since there is no built-in trial mechanism, I would assume that if it works, it works.

Ok, thank you. I'm new to Windows 7 (didn't even use Vista before) so I've still got a lot of stuff to learn as some things just aren't as easy as on Windows 2003/2000/XP or they work different. Even took me some googling to figure out how to register a simple filter....
But I think that the registration isn't the cause of my problem anyways, as the filter actually tries to play back the file.

Episodio1 · 17th July 2010, 21:24

hehe, sneaker_ger. I have same config as yours and same problem since beginning (1 month ago). Once I registered with "graphstudio" I get same black screen.

I only tried with MPC-HC

LoRd_MuldeR · 17th July 2010, 22:17

Quote:

Originally Posted by schweinsz

I ever tried to fix the compability problem with the DVBViewer but I can't, I observed that the DiAVC sent decoded frames to the the renderer but nothing appeared and after a while it crashed.

Too bad. As long as DiAVC cannot work with DVBViwer it won't be an option for me

However it should be noted that the problem I'm observing is different from what you describe:
I do get output and the output is constantly updated, the only problem is that the output looks completely "scrambled". Also it doesn't crash here.

uncholowapo · 25th July 2010, 17:59

So is the 64 bit version ready? The world cup has been over for a while now

schweinsz · 26th July 2010, 17:16

Quote:

Originally Posted by uncholowapo

So is the 64 bit version ready? The world cup has been over for a while now

At the end of the month. I am delayed by something recently.

hajj_3 · 15th August 2010, 10:38

any new ETA on the 64bit build?

Guest · 18th August 2010, 00:42

schweinsz has been busy on this:

http://forum.doom9.org/showthread.ph...10#post1426910

Perhaps now he will find time for the 64-bit support.

sneaker_ger · 18th August 2010, 01:31

It tried the diavc.ax included in neuron's new package but it still does not work for me (tested in MPC-HC). Simply crashes.

schweinsz · 18th August 2010, 09:16

Quote:

Originally Posted by sneaker_ger

It tried the diavc.ax included in neuron's new package but it still does not work for me (tested in MPC-HC). Simply crashes.

Delete the registry key "CLSID\\{083863F1-70DE-11d0-BD40-00A0C911CE86}\\instance\\{5DFA20A
> 4-C 343-45DF-A46E-EC1711E4EE32}\\rgtcode" and "CLSID\\{083863F1-70DE-11d0-BD40-00A0C911CE86}\\instance\\{5DFA20A4
> -C3 43-45DF-A46E-EC1711E4EE32}\\password", then run the DiAVC Registration.exe to generate the machine code and input the password, then try it in the MPC-HC.

sneaker_ger · 18th August 2010, 09:44

No, still crashes.
With the previous version it would not instantly crash but instead show a few of the first frames. As it seems to attempt to play the file I'm not sure if the activation is the right spot to look at in finding a solution.

schweinsz · 18th August 2010, 10:34

Quote:

Originally Posted by sneaker_ger

No, still crashes.
With the previous version it would not instantly crash but instead show a few of the first frames. As it seems to attempt to play the file I'm not sure if the activation is the right spot to look at in finding a solution.

Ok, download this,
unzip it and run the now1.bat, check that if it crashes.

madshi · 18th August 2010, 10:43

@schweinsz, if you want to participate in defining the new "Open Media Type" format, please check your PMs.

Underground78 · 18th August 2010, 10:55

Quote:

Originally Posted by madshi

@schweinsz, if you want to participate in defining the new "Open Media Type" format, please check your PMs.

Just curious, what is "Open Media Type" format ?

sneaker_ger · 18th August 2010, 10:55

Quote:

Originally Posted by schweinsz

Ok, download this,
unzip it and run the now1.bat, check that if it crashes.

Does not crash and decodes the video correctly. (Meaning that the activation might be the cause after all?

)

schweinsz · 18th August 2010, 19:41

Quote:

Originally Posted by sneaker_ger

Does not crash and decodes the video correctly. (Meaning that the activation might be the cause after all?

)

No, the activation is in the decoder. your information means that the problem is within the filter.

sneaker_ger · 18th August 2010, 20:46

Ok, I did something different: instead of installing "for all users", I only installed "for me". Now MPC-HC doesn't instantly crash but instead shows a black screen and playback does not start.
Could it have something to do with any rights? If I start MPC-HC "normally" and open the filter settings it does not list the registration data. If I open as administrator it does list the registration data - but it does not play nonetheless.
I'm on Windows 7 x64 with UAC enabled.

madshi · 18th August 2010, 21:19

Quote:

Originally Posted by Underground78

Just curious, what is "Open Media Type" format ?

http://forum.doom9.org/showthread.php?t=156051

Underground78 · 18th August 2010, 21:25

Thank you !

audyovydeo · 20th August 2010, 10:38

Hello schweinsz.

How do I access the DiAVC properties page ?
I have got it working from DGAVCdecDI and MPC-HC, but I can't get to configure DiAVC itself.

thanks
audyovydeo

>>> UPDATE : forget it - just found it from MPC-HC !!!

cheers
a/v

lych_necross · 22nd August 2010, 07:40

I've noticed that while DiAVC plays H.264 files properly, using it makes MPC-HC sluggish. During playback, MPC's menus' respond to clicks very slowly and sometimes not at all. I checked my system's cpu usage during playback, at it is below 12%. My cpu is an Intel Core2 6400 btw. It should be noted that videos play just fine (no dropped or delayed frames). Is this normal?

17th July 2010, 21:24	#962 \| Link
Episodio1 Registered User Join Date: Feb 2002 Location: Spain Posts: 198	hehe, sneaker_ger. I have same config as yours and same problem since beginning (1 month ago). Once I registered with "graphstudio" I get same black screen. I only tried with MPC-HC

25th July 2010, 17:59	#964 \| Link
uncholowapo Registered User Join Date: Jul 2010 Posts: 2	So is the 64 bit version ready? The world cup has been over for a while now

15th August 2010, 10:38	#966 \| Link
hajj_3 Registered User Join Date: Mar 2004 Posts: 1,126	any new ETA on the 64bit build?

18th August 2010, 00:42	#967 \| Link
Guest Guest Join Date: Jan 2002 Posts: 21,901	schweinsz has been busy on this: http://forum.doom9.org/showthread.ph...10#post1426910 Perhaps now he will find time for the 64-bit support.

18th August 2010, 01:31	#968 \| Link
sneaker_ger Registered User Join Date: Dec 2002 Posts: 5,565	It tried the diavc.ax included in neuron's new package but it still does not work for me (tested in MPC-HC). Simply crashes.

18th August 2010, 09:44	#970 \| Link
sneaker_ger Registered User Join Date: Dec 2002 Posts: 5,565	No, still crashes. With the previous version it would not instantly crash but instead show a few of the first frames. As it seems to attempt to play the file I'm not sure if the activation is the right spot to look at in finding a solution.

18th August 2010, 10:43	#972 \| Link
madshi Registered Developer Join Date: Sep 2006 Posts: 9,140	@schweinsz, if you want to participate in defining the new "Open Media Type" format, please check your PMs.

18th August 2010, 20:46	#976 \| Link
sneaker_ger Registered User Join Date: Dec 2002 Posts: 5,565	Ok, I did something different: instead of installing "for all users", I only installed "for me". Now MPC-HC doesn't instantly crash but instead shows a black screen and playback does not start. Could it have something to do with any rights? If I start MPC-HC "normally" and open the filter settings it does not list the registration data. If I open as administrator it does list the registration data - but it does not play nonetheless. I'm on Windows 7 x64 with UAC enabled.

18th August 2010, 21:25	#978 \| Link
Underground78 Registered User Join Date: Oct 2004 Location: France Posts: 567	Thank you !

20th August 2010, 10:38	#979 \| Link
audyovydeo Registered User Join Date: Apr 2007 Posts: 464	Hello schweinsz. How do I access the DiAVC properties page ? I have got it working from DGAVCdecDI and MPC-HC, but I can't get to configure DiAVC itself. thanks audyovydeo >>> UPDATE : forget it - just found it from MPC-HC !!! cheers a/v

22nd August 2010, 07:40	#980 \| Link
lych_necross ZZZzzzz... Join Date: Jan 2007 Location: USA Posts: 303	I've noticed that while DiAVC plays H.264 files properly, using it makes MPC-HC sluggish. During playback, MPC's menus' respond to clicks very slowly and sometimes not at all. I checked my system's cpu usage during playback, at it is below 12%. My cpu is an Intel Core2 6400 btw. It should be noted that videos play just fine (no dropped or delayed frames). Is this normal?