LAV Filters - DirectShow Media Splitter and Decoders - Page 352

nevcairiel · 15th November 2011, 19:42

Quote:

Originally Posted by Midzuki

Come on, Nevcairiel, I didn't say (and I didn't mean) they are 100% garbage, I said (and meant) they still contain many lines of copied-n-pasted b0rked code

Its more likely just some feature not implemented.

Quote:

Originally Posted by Midzuki

As for the "killer samples" --- it's pretty trivial to create some of them with your favorite DVD-authoring freeware

Sure i could do that, but then someone that cares could also try to help out, which might actually make me fix the problem, otherwise i might just ignore it

Midzuki · 15th November 2011, 19:47

OK, you win.

SeeMoreDigital · 15th November 2011, 20:26

Quote:

Originally Posted by nevcairiel

You didn't activate bitstreaming which your hardware does not support?
Thats really the only reason the connection would completely fail.

If you are referring to my posts, I can confirm I have been able to use your filters to bit-stream HD audio to my Onkyo amp... which also supports HD audio!

After further tests, I've found I can't even get "std-def" AC3 and DTS audio to connect to LAV audio...

Gleb Egorych · 15th November 2011, 21:02

nevcairiel,

During testing 0.39.15 I found the hang bug had returned (can be reproduced by holding S key in Zoom Player). Release 0.39 seems to be OK.

Pat357 · 15th November 2011, 21:11

Quote:

Originally Posted by SeeMoreDigital

Hmmm... I can't get GraphStudio to connect to either of the following audio filters

To go back to your problem with LAV-splitter not being used to open .m2ts & .mkv files, can you please check the following keys in your registry :

Code:

[HKEY_CLASSES_ROOT\Wow6432Node\Media Type\Extensions\.m2ts]
"Source Filter"="{B98D13E7-55DB-4385-A33D-09FD1BA26338}"
 and 
[HKEY_CLASSES_ROOT\Wow6432Node\Media Type\Extensions\.mkv]
"Source Filter"="{B98D13E7-55DB-4385-A33D-09FD1BA26338}"

The value "Source Filter={B98D13E7-55DB-4385-A33D-09FD1BA26338} means that lav-splitter-(source) will be used to open .m2ts / mkv files.
If there is another value at this keys, just reinstall the LAV-filters and make sure these types are checked during installation.
IIRC, these values are only written to the registry when installing, not when you check/uncheck these in the Lav-splitter settings tab after installation.

SeeMoreDigital · 15th November 2011, 21:12

Well would you "Adam and Eve" it...

After de-installing "LAV", re-booting, re-installing "LAV" and re-booting... I'm now able to bit-stream HD audio to my amplifier again

Computers eh?

nevcairiel · 15th November 2011, 21:16

Quote:

Originally Posted by Gleb Egorych

During testing 0.39.15 I found the hang bug had returned (can be reproduced by holding S key in Zoom Player). Release 0.39 seems to be OK.

Should hopefully be fixed again.

-----------------------------

Some news from the DVD front:
Accepting and just eating up the subtitles seems to do the job, DVDs play fine now. Did need some trickery though, but all in all, its playing the dvds just fine. It is lacking the interactive menu overlays of course, and subtitles won't show.

Considering the subtitles are used to render the button overlays as well, i'm kinda partial to the idea of drawing them directly onto the frames, in case no renderer accepts the AYUV/ARGB pictures. Forwarding the still encoded subtitles wouldn't work in this case.

Pat357 · 15th November 2011, 21:41

Quote:

Originally Posted by SeeMoreDigital

Well would you "Adam and Eve" it...

After de-installing "LAV", re-booting, re-installing "LAV" and re-booting... I'm now able to bit-stream HD audio to my amplifier again

Computers eh?

I guess something messed up your Lav-filters....
Did you install some other multi-media package or other codes after the last time you installed Lav-filters using the installer ?
Does Lav-splitter now get used when you open .m2ts / .mkv files ?

note : uninstalling Lav-filters probably was not needed, just reinstall over the existing installation should have done the trick, as long as you use the installer.

SeeMoreDigital · 15th November 2011, 22:08

Quote:

Originally Posted by Pat357

I guess something messed up your Lav-filters....
Did you install some other multi-media package or other codes after the last time you installed Lav-filters using the installer ?

Just the latest version of DVDFab Decrypter.

Quote:

Originally Posted by Pat357

Does Lav-splitter now get used when you open .m2ts / .mkv files ?

No...

rica · 16th November 2011, 02:19

Quote:

Originally Posted by SeeMoreDigital

Hmmm... I can't get GraphStudio to connect to either of the following audio filters

This is crazy!

Yes it is, this is why i asked you to use GraphStuff to test.
The weird thing is why we do see speakers instead of blabla AVR in your case?
Checkout my listed audio renderers. Do you see any "speakers" statement? Are you sure Onkyo AVR (or whatsoever you have?) is selected by default on your playback devices? Or just speakers?

Not sure your AVR is connected to your PC properly or recognized properly by your PC.

The last test you should do to be sure, pls try this and forget bitstreaming for a while:

And last question: why don't you get rid of those Realtek drivers?

_ _

rica · 16th November 2011, 03:40

Quote:

Originally Posted by SeeMoreDigital

If you are referring to my posts, I can confirm I have been able to use your filters to bit-stream HD audio to my Onkyo amp... which also supports HD audio!

After further tests, I've found I can't even get "std-def" AC3 and DTS audio to connect to LAV audio...

Pls tell us what your problem is?

After i've explored this post i'm not able to make any comment since i understood nothing?
You are able to use lavfilters to bitsream HD audio?
But you can not bitstream SD audio?
But what "even" means here???
I should understand normally "i can not bitsream HD even SD audio".... or what???

What is yor HW? Dunno?
How you connected your unknown AVR to your PC? Dunno?
What is your problem really? Dunno?

nevcairiel · 16th November 2011, 07:27

You should learn to read, he said his problem was already fixed.

SeeMoreDigital · 16th November 2011, 09:57

Yes my issue has been fixed.

Many, many thanks to everyone who kindly offered help and their suggestions. It's much appreciated.

Thank-you again...

Aleksoid1978 · 16th November 2011, 13:07

Hi Nevcairiel. LAV Video 0.39 have trouble with playback this sample in Software mode(with CUVID play fine)
http://www.multiupload.com/ZGDZFMT4Q0
play with ~43fps and micro jitter.

0.38 and 0.37 play fine.

nevcairiel · 16th November 2011, 13:38

Quote:

Originally Posted by Aleksoid1978

LAV Video 0.39 have trouble with playback this sample in Software mode(with CUVID play fine)
http://www.multiupload.com/ZGDZFMT4Q0
play with ~43fps and micro jitter.

No change in my code would cause this, seems like a ffmpeg regression, if it is indeed a bug. It doesn't say its failing to decode, it just doesn't give any frames back.
I'll try to look into it, but reporting it to them is a good idea no matter what.

Edit: I found the offending commit, its http://git.videolan.org/?p=ffmpeg.gi...e678f425c7e4cf if anyone cares.

STaRGaZeR · 16th November 2011, 13:59

Another bug report here. This file (SFD, MPEG-1 + ADX) fails to decode smoothly if splitted with LAV Splitter. MPC's internal splitter plays it fine. Screenshots and file:

LAV Splitter ---------------- MPC's internal

http://www.mediafire.com/?tur04krbed4fdc4

nevcairiel · 16th November 2011, 14:44

Quote:

Originally Posted by STaRGaZeR

This file (SFD, MPEG-1 + ADX) fails to decode smoothly if splitted with LAV Splitter. MPC's internal splitter plays it fine.

Fixed locally, thanks for reporting!

mylle · 16th November 2011, 14:59

Im going to put in my new GT430 (instead of ATI 5770) today.

Should i just dl the latest driver from Nvidia or is there a preferred driver?

regards
Jacob

nevcairiel · 16th November 2011, 15:18

Latest are usually fine.

STaRGaZeR · 16th November 2011, 17:52

Quote:

Originally Posted by nevcairiel

Fixed locally, thanks for reporting!

No prob, thanks for fixing it

15th November 2011, 21:12	#7026 \| Link
SeeMoreDigital Life's clearer in 4K UHD Join Date: Jun 2003 Location: Notts, UK Posts: 12,227	Well would you "Adam and Eve" it... After de-installing "LAV", re-booting, re-installing "LAV" and re-booting... I'm now able to bit-stream HD audio to my amplifier again Computers eh? __________________ \| I've been testing hardware media playback devices and software A/V encoders and decoders since 2001 \| My Network Layout & A/V Gear \|

16th November 2011, 07:27	#7032 \| Link
nevcairiel Registered Developer Join Date: Mar 2010 Location: Hamburg/Germany Posts: 10,347	You should learn to read, he said his problem was already fixed. __________________ LAV Filters - open source ffmpeg based media splitter and decoders

16th November 2011, 09:57	#7033 \| Link
SeeMoreDigital Life's clearer in 4K UHD Join Date: Jun 2003 Location: Notts, UK Posts: 12,227	Yes my issue has been fixed. Many, many thanks to everyone who kindly offered help and their suggestions. It's much appreciated. Thank-you again... __________________ \| I've been testing hardware media playback devices and software A/V encoders and decoders since 2001 \| My Network Layout & A/V Gear \|

16th November 2011, 13:07	#7034 \| Link
Aleksoid1978 Registered User Join Date: Apr 2008 Location: Russia, Vladivostok Posts: 2,787	Hi Nevcairiel. LAV Video 0.39 have trouble with playback this sample in Software mode(with CUVID play fine) http://www.multiupload.com/ZGDZFMT4Q0 play with ~43fps and micro jitter. 0.38 and 0.37 play fine. __________________ AMD Ryzen 5 3600 /GIGABYTE B450 Gaming X /Patriot 32Gb@3200 /Kingston 500Gb M.2 /RTX 4060 /Samsung U28R550UQI /OLED Philips 55OLED707 /Yamaha RX-V471 + NS-555 + NS-C444 + NS-333 + YST-SW215

16th November 2011, 15:18	#7039 \| Link
nevcairiel Registered Developer Join Date: Mar 2010 Location: Hamburg/Germany Posts: 10,347	Latest are usually fine. __________________ LAV Filters - open source ffmpeg based media splitter and decoders

15th November 2011, 19:47	#7022 \| Link
Midzuki Unavailable Join Date: Mar 2009 Location: offline Posts: 1,480	OK, you win.

15th November 2011, 21:02	#7024 \| Link
Gleb Egorych Registered User Join Date: Aug 2008 Posts: 231	nevcairiel, During testing 0.39.15 I found the hang bug had returned (can be reproduced by holding S key in Zoom Player). Release 0.39 seems to be OK.

16th November 2011, 14:59	#7038 \| Link
mylle Registered User Join Date: Aug 2010 Posts: 6	Im going to put in my new GT430 (instead of ATI 5770) today. Should i just dl the latest driver from Nvidia or is there a preferred driver? regards Jacob