BeLight 0.22 beta 8 released - Page 70

sillKotscha · 26th October 2006, 21:07

Hi Kurtnoise13,

I have a question about the BeLight Log-file...

it states that two encoder are missing but AFAIK I should have all off them in my BeLight-Folder...

does BeLight doesn't recognize them - therefor the error message - or do I have wrong versions (= too old version?)

thanks in advance, Sill

Log:

my "installed" *.exe files:

my "installed" *.dll files:

EDIT:

btw, do I have obsolete files in my BeLight directory? And it is impossible to reach http://www.corecodec.org/frs/?group_...se_id=292#r292 at the moment... is there any other place to download dimzon's latest files?

slicksta · 26th October 2006, 22:25

Im trying transcode a whole heap of mp3s to mp4 or AAC+ to use in my W850 (sony/ericsson phone), but despite going over this forum, I cant seem to find a solution to getting more than 1 input file to process at a time. For some reason it only processes the last file in the list. I have a few thousand to do, so 1 at a time would take forever. Any help/advice appreciated. Im using 0.22beta9.

Bluedan · 26th October 2006, 22:49

@slicksta Your question has already been answered here.

Don't use drag'n drop, but open file(s) dialogue.

Kurtnoise · 27th October 2006, 12:58

Quote:

Originally Posted by sillKotscha

I have a question about the BeLight Log-file...

it states that two encoder are missing but AFAIK I should have all off them in my BeLight-Folder...

does BeLight doesn't recognize them - therefor the error message - or do I have wrong versions (= too old version?)

This is not errors but just some warnings...

Errors are reported with an other picture (the white cross with red background). Besides, BeLight works fine even these warnings.

I know there is a bug with enAacplusEnc. It's already fixed but I can't upload a new build at the moment as you can see...CC.org is down for me too. Maybe tonight...

About Aud-X encoder, this is not the right one. You just have to install Aud-X installer (BeLight uses the Aud-X encoder from Program Files\Aud-X\...) and that should be ok. Note that there is none obligation to install this compressor (only needed for mp3 surround).

About obsolete files : if you use NeroAACEnc.exe then aac.dll & aacenc32.dll are useless. Same thing with bsn.dll : if you use this last one then all bse_xxxxx.dll are not needed anymore.

sillKotscha · 27th October 2006, 17:25

Hi Kurtnoise13,

thank you for the answer.

TheManuel · 28th October 2006, 16:51

Is there a daily build of BeLight that supports both .avi files as input and the Aften encoder?

Thanks.

Kurtnoise · 28th October 2006, 16:59

Nope...but avi support will be included soon.

TheManuel · 28th October 2006, 17:58

Great! I look forward to that.
Thanks for sharing your work.

Audionut · 29th October 2006, 01:43

Hi, I'm trying to mux 6 mono wav files to a 5.1 wave file. But all i'm getting is noise in return.

The transcode finishes completely and the file is created.

slicksta · 2nd November 2006, 04:33

"@slicksta Your question has already been answered here.

Don't use drag'n drop, but open file(s) dialogue"

Like I said Ive been over this entire forum. This was the first thing I tried. For some reason its still not working. Only transcodes one file from the list. Am I missing something?
I tried different encoders as well as previous Belight versions, & still no go. Any suggestions/solutions?

m0rtal · 2nd November 2006, 07:23

Quote:

Originally Posted by slicksta

"@slicksta Your question has already been answered here.

Don't use drag'n drop, but open file(s) dialogue"

Like I said Ive been over this entire forum. This was the first thing I tried. For some reason its still not working. Only transcodes one file from the list. Am I missing something?
I tried different encoders as well as previous Belight versions, & still no go. Any suggestions/solutions?

I have same issue

latest daily build, latest stable - doesn't matter...

Bluedan · 2nd November 2006, 09:14

Indeed. Slicksta, sorry, you were right. I confirm.

m0rtal · 2nd November 2006, 10:44

Quote:

Originally Posted by Bluedan

Indeed. Slicksta, sorry, you were right. I confirm.

so it's a common problem? :-\

slicksta · 4th November 2006, 07:06

Quote:

Originally Posted by bluedan

Indeed. Slicksta, sorry, you were right. I confirm.

Thanx for confirming Bluedan

Any suggestions Kurtnoise?

Kurtnoise · 5th November 2006, 10:38

Quote:

Originally Posted by slicksta

Any suggestions Kurtnoise?

Wait a new build...or use fb2k.

MacAddict · 5th November 2006, 16:45

The AC3 384kbps preset enables 'hybrid' gain. Is this correct or should I use 'pre-gain'? I'm using the Aften mode so should I have anything else turned on within the 'advanced' window such as DNR?

Any info is much appreciated. Thx again for such a great app!

Kurtnoise · 5th November 2006, 16:56

What kind of source do you have ?

MacAddict · 6th November 2006, 05:53

My source is 448kbps AC3. Just curious what people are using.

Kurtnoise · 6th November 2006, 09:29

Well, Hybridgain or PreGain don't hurt transcoding you know...Same thing for DNR.

MacAddict · 7th November 2006, 03:14

So DNR really has no effect when transcoding high bitrate AC3 to lower bitrate? Interesting! Thx

26th October 2006, 21:07	#1381 \| Link
sillKotscha what's this for? Join Date: Apr 2002 Location: Berlin, Germany Posts: 993	Hi Kurtnoise13, I have a question about the BeLight Log-file... it states that two encoder are missing but AFAIK I should have all off them in my BeLight-Folder... does BeLight doesn't recognize them - therefor the error message - or do I have wrong versions (= too old version?) thanks in advance, Sill Log: my "installed" .exe files: my "installed" .dll files: EDIT: btw, do I have obsolete files in my BeLight directory? And it is impossible to reach http://www.corecodec.org/frs/?group_...se_id=292#r292 at the moment... is there any other place to download dimzon's latest files? __________________ latest mix sets: http://soundcloud.com/sill Last edited by sillKotscha; 26th October 2006 at 21:09.

26th October 2006, 22:25	#1382 \| Link
slicksta Registered User Join Date: Oct 2006 Posts: 3	Processing mulitple files Im trying transcode a whole heap of mp3s to mp4 or AAC+ to use in my W850 (sony/ericsson phone), but despite going over this forum, I cant seem to find a solution to getting more than 1 input file to process at a time. For some reason it only processes the last file in the list. I have a few thousand to do, so 1 at a time would take forever. Any help/advice appreciated. Im using 0.22beta9.

26th October 2006, 22:49	#1383 \| Link
Bluedan Registered User Join Date: Oct 2001 Location: were people always get wet feet Posts: 328	@slicksta Your question has already been answered here. Don't use drag'n drop, but open file(s) dialogue. __________________ I'm probably misconfused...

27th October 2006, 17:25	#1385 \| Link
sillKotscha what's this for? Join Date: Apr 2002 Location: Berlin, Germany Posts: 993	Hi Kurtnoise13, thank you for the answer. __________________ latest mix sets: http://soundcloud.com/sill

28th October 2006, 16:51	#1386 \| Link
TheManuel Registered User Join Date: Jun 2006 Location: Canton, MI USA Posts: 30	.avi and Aften Is there a daily build of BeLight that supports both .avi files as input and the Aften encoder? Thanks.

28th October 2006, 16:59	#1387 \| Link
Kurtnoise Swallowed in the Sea Join Date: Oct 2002 Location: Aix-en-Provence, France Posts: 5,191	Nope...but avi support will be included soon.

28th October 2006, 17:58	#1388 \| Link
TheManuel Registered User Join Date: Jun 2006 Location: Canton, MI USA Posts: 30	Great! I look forward to that. Thanks for sharing your work.

29th October 2006, 01:43	#1389 \| Link
Audionut Registered User Join Date: Nov 2003 Posts: 1,281	Hi, I'm trying to mux 6 mono wav files to a 5.1 wave file. But all i'm getting is noise in return. The transcode finishes completely and the file is created.

2nd November 2006, 04:33	#1390 \| Link
slicksta Registered User Join Date: Oct 2006 Posts: 3	"@slicksta Your question has already been answered here. Don't use drag'n drop, but open file(s) dialogue" Like I said Ive been over this entire forum. This was the first thing I tried. For some reason its still not working. Only transcodes one file from the list. Am I missing something? I tried different encoders as well as previous Belight versions, & still no go. Any suggestions/solutions?

2nd November 2006, 09:14	#1392 \| Link
Bluedan Registered User Join Date: Oct 2001 Location: were people always get wet feet Posts: 328	Indeed. Slicksta, sorry, you were right. I confirm. __________________ I'm probably misconfused...

5th November 2006, 16:45	#1396 \| Link
MacAddict XviD User Join Date: Oct 2004 Location: Ky Posts: 190	The AC3 384kbps preset enables 'hybrid' gain. Is this correct or should I use 'pre-gain'? I'm using the Aften mode so should I have anything else turned on within the 'advanced' window such as DNR? Any info is much appreciated. Thx again for such a great app! __________________ DFI NF4 SLI Expert \| Opteron 165 CCBBE 0616 XPMW (9x325HTT=2.9Ghz) \| 2x1GB G.Skill HZ (3-4-4-8-12-16-2T) \| LG 62L DVD/CD \| Geforce 7300GT \| All SATA \| Antec 650 Trio PSU \| XP SP2

5th November 2006, 16:56	#1397 \| Link
Kurtnoise Swallowed in the Sea Join Date: Oct 2002 Location: Aix-en-Provence, France Posts: 5,191	What kind of source do you have ?

6th November 2006, 05:53	#1398 \| Link
MacAddict XviD User Join Date: Oct 2004 Location: Ky Posts: 190	My source is 448kbps AC3. Just curious what people are using. __________________ DFI NF4 SLI Expert \| Opteron 165 CCBBE 0616 XPMW (9x325HTT=2.9Ghz) \| 2x1GB G.Skill HZ (3-4-4-8-12-16-2T) \| LG 62L DVD/CD \| Geforce 7300GT \| All SATA \| Antec 650 Trio PSU \| XP SP2

6th November 2006, 09:29	#1399 \| Link
Kurtnoise Swallowed in the Sea Join Date: Oct 2002 Location: Aix-en-Provence, France Posts: 5,191	Well, Hybridgain or PreGain don't hurt transcoding you know...Same thing for DNR.

7th November 2006, 03:14	#1400 \| Link
MacAddict XviD User Join Date: Oct 2004 Location: Ky Posts: 190	So DNR really has no effect when transcoding high bitrate AC3 to lower bitrate? Interesting! Thx __________________ DFI NF4 SLI Expert \| Opteron 165 CCBBE 0616 XPMW (9x325HTT=2.9Ghz) \| 2x1GB G.Skill HZ (3-4-4-8-12-16-2T) \| LG 62L DVD/CD \| Geforce 7300GT \| All SATA \| Antec 650 Trio PSU \| XP SP2

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode