MeGUI - x264/XviD/lavc/Snow encoder with MP4/MKV/AVI output & audio - Page 59

check · 20th December 2006, 23:54

have you tried reinstalling MeGUI?

Seroxat · 21st December 2006, 12:29

Same problem here, unable to load d2v in AviSynth scrip creator. Following error message pops up (version 2.4.1012):

"Error message for your reference: Attempted to read or write protected memory. This is often an indication that other memory is corrupt."

I do have a YU12 codec installed, and opening d2v works in all other applications including MeGUI versions 2.3.xxxx.

weaver4 · 21st December 2006, 15:06

Does MeGui support single pass XviD? I did not see it. What profile would one use?

Sh4nn0w · 21st December 2006, 18:22

Just setup your own profile. One isn't provided.

karasu · 23rd December 2006, 15:01

Quote:

have you tried reinstalling MeGUI?

yes, twice. And reinstalling Avisynth too. No change.

parcival · 30th December 2006, 08:53

Same problem with karasu for me too.

It worked OK with previous versions (2.3.x.x)

check · 30th December 2006, 09:24

try reinstalling your YV12 decompressor

parcival · 2nd January 2007, 22:13

I tried everything.
The problem is with MeGUI.

I just replaced latest MeGUI version (AutoUpdate) with MeGUI v0.2.3.2193 (megui.exe, MessageBoxExLib.dll and ICSharpCode.SharpZipLib.dll) and everything works fine. So it is not the decoder or Avisynth. Something changed in MeGUI v0.2.4.x and it messed things up.

Sharktooth · 3rd January 2007, 01:34

Works here...

chadamir · 3rd January 2007, 07:56

I can't seem to put in a decimal value i.e. 18.3 for crf encoding.

parcival · 3rd January 2007, 14:29

Let me try to be more specific.
I use ffdshow as the only decoder in my system (2006-12-30 build by clsid) together with Haali Media Splitter (28/12/2006). AviSynth v2.5.6 is also installed.

Let me clarify that I am talking ONLY about Avisynth builder included in MeGUI tools. Everything else works for me too. When I try to open a d2v file created with DGIndex.exe (version 1.4.8) I get the error message.

As I already said this doesn't happen with MeGUI v0.2.3.2193

Sharktooth · 3rd January 2007, 14:30

CRF and QP accept only integer numbers.

@parcival: i cant reproduce... it works perfectly here.

parcival · 3rd January 2007, 23:00

Do you use the same codecs etc with me or different?

I could give AviSynth v2.5.6a a go too just in case...

nurbs · 4th January 2007, 11:57

Quote:

Originally Posted by Sharktooth

CRF and QP accept only integer numbers.

CRF accepts fractional values since rev. 591.

Sharktooth · 4th January 2007, 14:35

i meant in megui.. he cant specify fractional values coz it accepts only integer numbers.

chadamir · 5th January 2007, 05:32

I knew what he meant, any plans to change that?

Sharktooth · 5th January 2007, 14:20

is it really necessary? I mean, i cant see the reason akupenguin implemented fractional CRF values...

parcival · 5th January 2007, 15:30

I tried to my other computer with windows XP and exactly the same codecs/programs installed and it works fine.

It seems something is wrong with MeGUI 2.4.x.x and 2K. Do Windows 2K miss something? (I have latest Windows updates installed on both machines)

chadamir · 5th January 2007, 16:42

Quote:

Originally Posted by Sharktooth

is it really necessary? I mean, i cant see the reason akupenguin implemented fractional CRF values...

http://forum.doom9.org/showthread.php?t=116773 Take a look at this thread, they basically figured out how to get crf to an exact bitrate without taking any significant hit to quality over two pass.

Sharktooth · 5th January 2007, 17:00

ooook.

20th December 2006, 23:54	#1161 \| Link
check phjbdpcrjlj2sb3h Join Date: Sep 2005 Location: Western Australia Posts: 1,691	have you tried reinstalling MeGUI? __________________ CCCP \| MeWiki \| techouse's x264 builds \| Kovensky's mplayer builds

30th December 2006, 09:24	#1167 \| Link
check phjbdpcrjlj2sb3h Join Date: Sep 2005 Location: Western Australia Posts: 1,691	try reinstalling your YV12 decompressor __________________ CCCP \| MeWiki \| techouse's x264 builds \| Kovensky's mplayer builds

3rd January 2007, 01:34	#1169 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 11,768	Works here... __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!!

3rd January 2007, 14:30	#1172 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 11,768	CRF and QP accept only integer numbers. @parcival: i cant reproduce... it works perfectly here. __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!!

4th January 2007, 14:35	#1175 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 11,768	i meant in megui.. he cant specify fractional values coz it accepts only integer numbers. __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!!

21st December 2006, 12:29	#1162 \| Link
Seroxat Registered User Join Date: Mar 2003 Posts: 1	Same problem here, unable to load d2v in AviSynth scrip creator. Following error message pops up (version 2.4.1012): "Error message for your reference: Attempted to read or write protected memory. This is often an indication that other memory is corrupt." I do have a YU12 codec installed, and opening d2v works in all other applications including MeGUI versions 2.3.xxxx.

21st December 2006, 15:06	#1163 \| Link
weaver4 Registered User Join Date: Jun 2005 Posts: 925	Does MeGui support single pass XviD? I did not see it. What profile would one use?

21st December 2006, 18:22	#1164 \| Link
Sh4nn0w Registered User Join Date: Feb 2006 Location: UK Posts: 5	Just setup your own profile. One isn't provided.

30th December 2006, 08:53	#1166 \| Link
parcival Registered User Join Date: Jun 2005 Posts: 32	Same problem with karasu for me too. It worked OK with previous versions (2.3.x.x)

2nd January 2007, 22:13	#1168 \| Link
parcival Registered User Join Date: Jun 2005 Posts: 32	I tried everything. The problem is with MeGUI. I just replaced latest MeGUI version (AutoUpdate) with MeGUI v0.2.3.2193 (megui.exe, MessageBoxExLib.dll and ICSharpCode.SharpZipLib.dll) and everything works fine. So it is not the decoder or Avisynth. Something changed in MeGUI v0.2.4.x and it messed things up.

3rd January 2007, 07:56	#1170 \| Link
chadamir Registered User Join Date: Apr 2003 Posts: 92	I can't seem to put in a decimal value i.e. 18.3 for crf encoding.

3rd January 2007, 14:29	#1171 \| Link
parcival Registered User Join Date: Jun 2005 Posts: 32	Let me try to be more specific. I use ffdshow as the only decoder in my system (2006-12-30 build by clsid) together with Haali Media Splitter (28/12/2006). AviSynth v2.5.6 is also installed. Let me clarify that I am talking ONLY about Avisynth builder included in MeGUI tools. Everything else works for me too. When I try to open a d2v file created with DGIndex.exe (version 1.4.8) I get the error message. As I already said this doesn't happen with MeGUI v0.2.3.2193

3rd January 2007, 23:00	#1173 \| Link
parcival Registered User Join Date: Jun 2005 Posts: 32	Do you use the same codecs etc with me or different? I could give AviSynth v2.5.6a a go too just in case...

5th January 2007, 05:32	#1176 \| Link
chadamir Registered User Join Date: Apr 2003 Posts: 92	I knew what he meant, any plans to change that?

5th January 2007, 14:20	#1177 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 11,768	is it really necessary? I mean, i cant see the reason akupenguin implemented fractional CRF values... __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!!

5th January 2007, 15:30	#1178 \| Link
parcival Registered User Join Date: Jun 2005 Posts: 32	I tried to my other computer with windows XP and exactly the same codecs/programs installed and it works fine. It seems something is wrong with MeGUI 2.4.x.x and 2K. Do Windows 2K miss something? (I have latest Windows updates installed on both machines)

5th January 2007, 17:00	#1180 \| Link
Sharktooth Mr. Sandman Join Date: Sep 2003 Location: Haddonfield, IL Posts: 11,768	ooook. __________________ MPEG-4 ASP Custom Matrices: EQM V1(old), EQM AutoGK Sharpmatrix (aka EQM V2), EQM V3HR (updated 01/10/2004), EQM V3LR, EQM V3ULR (updated 04/02/2005), EQM V3UHR (updated 17/12/2004) and EQM V3EHR (updated 05/10/2004) Info about my ASP matrices. MPEG-4 AVC Custom Matrices: EQM AVC-HR Info about my AVC matrices My x264 builds. Mooo!!!