real producer problem

[h9903209]

I just format my computer and after install real producer it crashes everytime after converting file for several seconds to minutes... T__T
anyone encounter this problem before too? I guess maybe some software/code conflict again... troublesome...T__T

[Sirber]

[karl_lillevold]

yes, logfile please, and also some details about your system, like CPU, dual CPU..? Which version of Windows, and which version of Producer, input file format, command line options etc? Thanks.

[h9903209]

log file:

Job Name Category Functional Area Timestamp MessageID Message
,Diagnostic,Command Line,2003/12/15 13:30:14,0,"producer.exe -i C:\Program Files\Yatoshi Satsuki'S Real producer GUI english version\producer9.2M\1000.avs -o D:\Sakura_Wars_TV_13_(LeechingAlliance)_(289CD571).rmvb -ad C:\Program Files\Yatoshi Satsuki'S Real producer GUI english version\producer9.2M\1.rpad -am music -vm sharp -dt -t -a -c -ag 0 -lc e,d" command line being run

when using M7, crash after a few seconds to about 1 minutes;
when using M8, crash instantly after start... T__T
tested diff kind of file, avi, mpg, etc, all crashes... don't want to format again... T__T

that's all... don't understand at all...
using winxp pro with sp1; athlon 2100+

[Sirber]

could you try with:

-lc "w,i,e,d"

and repost the logfile

[h9903209]

sorry, don't quite understand how to use command line...

I try enter:
producer.exe -i "C:\Program Files\Yatoshi Satsuki'S Real producer GUI english version\producer9.2M\1000.avs" -o D:\Sakura_Wars_TV_13_(LeechingAlliance)_(289CD571).rmvb -ad "C:\Program Files\Yatoshi Satsuki'S Real producer GUI english version\producer9.2M\1.rpad" -am music -vm sharp -dt -t -a -c -ag 0 -lc w,i,e,d

but it says:
,Error,Command Line,2003/12/15 21:46:18,10518,Unrecognized argument: "0"
,Error,Command Line,2003/12/15 21:46:18,10500,Command line parsing failed

[karl_lillevold]

hmm, hard to tell what's wrong, without any idea which module actually crashing. Check out this thread:
http://forum.doom9.org/showthread.ph...ight=quicktime
Perhaps some useful advice there. Since Producer uses DirectShow to read its input files, any kind of weird settings or filters being auto-inserted could potentially cause problems.

With regards to your command line, try to go to the folder where producer.exe is. Then simplify your command line to

producer.exe -i 1000.avs -o test.rmvb -ad 1.rpad -am music -vm sharp -dt -lc w,i,e,d

[h9903209]

thx, here's the logfile:

,Diagnostic,Command Line,2003/12/16 00:34:35,0,"producer.exe -i C:\Program Files\Yatoshi Satsuki'S Real producer GUI english version\producer9.2M\1000.avs -o D:\Sakura_Wars_TV_13_(LeechingAlliance)_(289CD571).rmvb -ad C:\Program Files\Yatoshi Satsuki'S Real producer GUI english version\producer9.2M\1.rpad -am music -vm sharp -dt -lc w,i,e,d" command line being run
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8050,--------- Input File Properties from rn-avfile-directshow
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8051,Input Filename: C:\Program Files\Yatoshi Satsuki'S Real producer GUI english version\producer9.2M\1000.avs
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8052,File Size: 0KB
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8053,Total Duration: 01:37:06.059
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8080,Video Track
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8081, Dimensions: 640 x 480
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8082, Frame Rate: 29.970 FPS
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8083, Format: YV12
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8084, Duration: 01:37:06.059
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8060,Audio Track
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8061, Channels: Stereo
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8062, Bit Depth: 16
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8063, SampleRate: 48000 Hz
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8064, Format: Uncompressed Audio
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8065, Duration: 01:37:06.059
PID1840,Diagnostic,File Reader,2003/12/16 00:34:36,8054,--------- End Input File Properties
PID1840,Informational,Command Line,2003/12/16 00:34:36,10529,Preparing to encode file "C:\Program Files\Yatoshi Satsuki'S Real producer GUI english version\producer9.2M\1000.avs" to file "D:\Sakura_Wars_TV_13_(LeechingAlliance)_(289CD571).rmvb"
PID1840,Informational,SDK Encoding,2003/12/16 00:34:36,15000,Starting encode
PID1840,Diagnostic,SDK Encoding,2003/12/16 00:34:36,0,Load Level Headings: Reference Time, Stream Time, Delay, Interval Load, Average Interval Load, Processing Load, Stream Interval, Reference Interval, Accrued Delay, Average Delay, Load Level
PID1840,Diagnostic,SDK Encoding,2003/12/16 00:34:36,0,Using 1 Audience
PID1840,Diagnostic,SDK Encoding,2003/12/16 00:34:36,0,Using video codec: rv9 (396718 bps)
PID1840,Diagnostic,SDK Encoding,2003/12/16 00:34:36,0,Using audio codec: cook (64082 bps)
PID1840,Diagnostic,Video Codec,2003/12/16 00:34:36,20049,Setting video packet size to 1352
PID1840,Warning,Audio Pre-filters,2003/12/16 00:36:20,3163,Channel 1 clips slightly.

[karl_lillevold]

not much useful in that logfile. Encoding starts normally. Could you create an /empty/ file called debug.txt in producer's directory and re-run the same command. Now you will get a lot more debug information. Can you send me this in a PM?

When you play your input file in Media Player Classic, or in graphedit, can you check which DirectShow filters are loaded? Thanks.

[Shinobu]

Hello

nothing's bad with producer
but my gui (3.0.0.2 version) is made to be use with producer 9.2M6, please use the producer included with my gui, so you won't have these bugs.

i've not translated it , but the current version is the final.2 , with a lot of corrected bugs, and, the last dll of Karll (fast 2-pass) with producer 9.2M6 (causer i got some bugs with some mpeg with M7 & M8 ^^).

so try the 3.0.0.2 with full install (producer also ^^) or try the final.2 version, it not translated yet so it's in french (but not a lot of options change so it's not very hard to understand...).

try ... and if theres some more bugs, reply me here ^^

ps : if you use avisynth 2.53 with some c plugin, it will crash second pass sometime so you'll hase a some ko file unreadable ^^.

++

[h9903209]

yes, I have tried that too... and try some other GUI too... all crash... and I just try play around with the filtermanager... now seems everything become mess... probably give up... waste too much time... T__T

[Shinobu]

try this

1) uninstall avisynth and delete ALL plugin you have
2) install avisynth 2.53 with no plugins
3) try encode with the gui of your choise (full insall to get the plugin of the gui)

i deffinively think it's an avisynth problem

have you try some xvid, divx encoding with the same source ? if no try, if it have the same problem that's definively an avisynth problem, if it haven't sorry but it's a bug i've never seen

++

[h9903209]

@karl:
do you mean creating an empty file named "debug.txt" and then send the producer.log to you? if yes then I have done it and plesae recieve the pm.

@shinobu
I install the avisynth included in your package, should have no plugin...